Back to news

June 18, 2019 | International, C4ISR, Other Defence

What’s the best way for the Army to demonstrate force via electronic warfare?

By:

When the Russian military attacked Ukraine, it prevented units from communicating with each other by turning to powerful electronic jamming tools.

The U.S. Army, however, is not interested in the same raw demonstration of force. Instead, U.S. officials are following a philosophy that relies on “surgical” attacks. This could include creating an image on enemy's radar, projecting an aircraft at one location when enemies think it is at another, or impairing the command and control links of adversaries' unmanned aerial systems.

“When the Russians emit like that, they're letting the entire world know where they are,” Col. Mark Dotson, the Army's capabilities manager for electronic warfare said on a media call with two reporters June 14. “What we're looking at in the future ... [is] surgical electronic attack, electronic intrusion or 21st century electron attack. We're looking for much more discrete ways of conducting electronic attack. Using low power to affect the signal and to affect it in such a way that it may not even be detectable that you're interfering with what they're doing.”

Dotson said instead of sheer power, future capabilities should focus on the end result, such as whether it's hurting an enemy's ability to communicate or to use radar.

“There's a variety of different approaches that can be taken to create the effect necessary without having to do what we refer to as traditional jamming, which is just increasing the signal to noise ratio,” Dave May, senior cyber intelligence advisor at the Cyber Center of Excellence, said.

Finding materiel solutions

The officials spoke at the conclusion of Cyber Quest, a week-long technology experimentation that took place at Fort Gordon. Cyber Quest is a prototyping event that allows the Army to test technologies and concepts from industry to help solve future problems.

This year, Army leaders focused on several areas. They include:

  • Improving the requirements for the Terrestrial Layer System, an integrated electronic warfare and signals intelligence system that will provide a much-needed jamming capability to formations;

  • Identifying candidates for rapid acquisition, and

  • Conducting risk reduction against current programs and identifying candidates for electronic warfare capabilities to outfit the Intelligence, Information, Cyber, Electronic Warfare and Space detachment or I2CEWS, a battalion-sized unit described as the “brain” of the Army's multidomain task force.

“Cyber Quest helps ... in that we are able to take these difficult challenges to industry, walk them through what we're trying to accomplish and let industry come back to us with novel approaches,” May said. “This pre-prototyping philosophy allows us to work through concepts, [tactics, techniques and procedures], and actually start the concept for doctrine.”

At Cyber Quest, Army officials focused on the overall TLS system and two subsets: the Tactical Electronic Warfare System (TEWS) and the Tactical Signals Intelligence Vehicle. Both are integrated platforms the Army is using to experiment with different technologies that would allow for sensing, signals intelligence, electronic warfare and RF-enabled cyberattacks. May said these subsystems are in the pre-prototype phase.

Army leaders also tested a spectrum analyzer tool that will notify commanders of the health of their systems within the electromagnetic spectrum. Such a tool would provide details on the footprint of blue force electromagnetic spectrum. The Army's current spectrum management program of record, Electronic Warfare Planning and Management Tool, only offers details on red force's in the spectrum relying on sensors in the field. By contrast, the spectrum analyzer tool the Army looked at during Cyber Quest is a handheld system that doesn't need to rely on the sensors that belong to tactical operational tools.

There's been a focus across all the services in recent years to better understand their own electromagnetic spectrum as a way to prevent themselves from being detected and jammed or detected and killed.

The details for when these capabilities would reach soldiers, however, is still in flux. If the Army has approved a requirement, a new product can be fielded to certain units under what the Army refers to as a buy, try, decide model. Capabilities can be fielded faster if they are funneled through the Rapid Equipping Force, though, they wouldn't become a program of record, but could be fielded to operational units that need it between 90 days and six months. If a capability goes through the Rapid Capabilities Office, it could take six to 18 months to get to units, Dotson said.

May said the goal for TLS is to deliver a “validated requirement” to the program manager by third quarter of fiscal year 2020. That puts fielding in the 2022 or 2023 timeframe.

Officials were a bit more circumspect on the Multi-Functional Electronic Warfare Air Large program, a first of its kind brigade-organic aerial electronic attack pod that will be mounted on unmanned systems.

Lockheed Martin was awarded was awarded two sequential 18-month contracts valued at $18 million in January.

Officials said it should be flying within the next 12 months but added that they want to see the product that ends up flying before forecasting a timeline for when it would reach units.

https://www.c4isrnet.com/electronic-warfare/2019/06/17/whats-the-best-way-for-the-army-to-demonstrate-force-via-electronic-warfare/

On the same subject

  • CPI Aero Announces $65.7 Million Air Force Contract for T-38 Aircraft Modification Kits

    July 30, 2019 | International, Aerospace

    CPI Aero Announces $65.7 Million Air Force Contract for T-38 Aircraft Modification Kits

    July 29, 2019 - Edgewood, NY -- CPI Aerostructures, Inc. (“CPI Aero®”) (NYSE American: CVU) today announced that it has been awarded a $65.7 million indefinite-delivery/indefinite-quantity (IDIQ) contract from the United States Air Force to provide structural modification kits, program management, logistics, and other sustainment services in support of Phase 3 of the T-38C Pacer Classic III Fuselage Structural Modification Kit Integration program (“PC III”) and the Talon Repair Inspection and Maintenance (“TRIM”) program. The company also received its first delivery order under the contract valued at $3.4 million for which work will commence immediately. For more than 50 years, the Northrop T-38 has been the principal supersonic jet trainer used by the US Air Force. PC III and TRIM are expected to increase the structural service life of the T-38 beyond 2030. PC III is a three-phase aircraft modification program that began in 2011 to increase the structural service life of a certain number of T-38C Talon aircraft. Requirements for Phase I were fulfilled by Northrop Grumman Technical Services. In 2015, CPI Aero was awarded Phase 2 of PC III and is currently supplying kits and services to the USAF under that contract through 2021. Under the new contract announced today, CPI will support the final phase of PC III as well as TRIM. The TRIM program is a separate USAF structural modification effort that will extend the structural service life of T-38A and T-38 model types, as well as, T-38C models that were not modified during PC III. Douglas McCrosson, President and CEO of CPI Aero, stated, “We are honored to have been chosen by the U.S. Air Force to continue our work on PC III and begin work on TRIM , two programs that are essential to the critical mission of training our future military aviators. This contract recognizes our excellent past performance as a prime contractor to the USAF and our long history with the T-38 platform that dates back to 2001. It is a testament to our reputation as an exceptional supply chain partner and leverages the investments we have made in developing world class engineering, supply chain management and program management capabilities.” For the PCIII Phase III requirement, the period of performance is anticipated as a three-year ordering period, with an additional one year for delivery after an order is placed. For the TRIM requirement, the period of performance is anticipated as a 10-year ordering period, with an additional one year for delivery after an order is placed. About CPI Aero CPI Aero is a U.S. manufacturer of structural assemblies for fixed wing aircraft, helicopters and airborne Intelligence Surveillance and Reconnaissance and Electronic Warfare pod systems in both the commercial aerospace and national security markets. Within the global aerostructure supply chain, CPI Aero is either a Tier 1 supplier to aircraft OEMs or a Tier 2 subcontractor to major Tier 1 manufacturers. CPI also is a prime contractor to the U.S. Department of Defense, primarily the Air Force. In conjunction with its assembly operations, CPI Aero provides engineering, program management, supply chain management, and MRO services. CPI Aero is included in the Russell Microcap® Index. The above statements include forward looking statements that involve risks and uncertainties, which are described from time to time in CPI Aero's SEC reports, including CPI Aero's Form 10-K for the year ended December 31, 2018, and Form 10-Q for the three-month period ended March 31, 2019. CPI Aero® is a registered trademark of CPI Aerostructures, Inc. For more information, visit www.cpiaero.com, and follow us on Twitter @CPIAERO. Contact: Vincent Palazzolo Chief Financial Officer CPI Aero (631) 586-5200 www.cpiaero.com Investor Relations Counsel: LHA Investor Relations Sanjay M. Hurry/Jody Burfening (212) 838-3777 cpiaero@lhai.com www.lhai.com View source version on CPI Aero: http://www.cpiaero.com/cpi-aero-announces-%2465.7m-air-force-contract.html https://www.epicos.com/article/449408/cpi-aero-announces-657-million-air-force-contract-t-38-aircraft-modification-kits

  • Space Operations Command preps for new shared domain awareness tool

    December 23, 2024 | International, Aerospace

    Space Operations Command preps for new shared domain awareness tool

    The remaining ATLAS software is slated for delivery in the first quarter of 2025.

  • Greek parliament considers major arms deals with France

    February 16, 2022 | International, Land

    Greek parliament considers major arms deals with France

    Lawmakers are also debating whether to add six new Rafale fighter jets to an existing order for 18 planes '€’ six of them newly built and 12 that were previously in service in the French air force.

All news