Back to news

March 24, 2023 | International, Aerospace

US Air Force wants money to speed E-7 purchases in FY24 wish list

The unfunded priorities list also requests money to buy 12 conformal fuel tanks for F-15EX fighters to extend their range and let it carry more weapons.

https://www.defensenews.com/air/2023/03/24/us-air-force-wants-money-to-speed-e-7-purchases-in-fy24-wish-list/

On the same subject

  • Bell Invictus to Offer Army ‘Lower-Risk Path’ to FARA Capabilities

    December 16, 2019 | International, Aerospace

    Bell Invictus to Offer Army ‘Lower-Risk Path’ to FARA Capabilities

    By Brian Garrett-Glaser ARLINGTON, Texas — Bell's offering for the Army's Future Attack Reconnaissance Aircraft (FARA) contest, the 360 Invictus, is intended to offer the Army an insurance policy by presenting a lower-risk path to the capabilities it hopes to acquire as a “knife fighter” light attack helicopter to replace the retired OH-58 Kiowa Warriors. The Invictus, with its low-drag tandem cockpit design, draws from a lot of the development Bell has put into the 525 Relentless, a super-medium utility aircraft it hopes will be the first fly-by-wire rotorcraft certified for the civil market. Though Bell's FARA program is newer than some of its competitors, such as Sikorsky's S-97 Raider — Bell officials said the program had just three employees at this time last year and now comprises over 200 — the company believes its reliance on systems which it already has at a high technology readiness level due to work on the 525 will provide the Army with a compelling aircraft inside of its cost and timeline objectives. “It's still a very advanced aircraft. But by using technologies that we already had high TRLs in, or high manufacturing readiness levels in, we are ahead on that timeline piece,” Frank Lazzara, director of advanced vertical lift systems, told Avionics International during a press visit to the company's Flight Research Center here. The Invictus design meets or exceeds Army requirements in every area, according to Lazzara, due in part to the clean-sheet engineering that went into the Bell 525, including in the main and tail rotor systems. That aircraft has flown in excess of 200 knots without issue, despite being designed for 160 knots cruise speed. Bell intends the Invictus to cruise efficiently at 180 knots. “We flew [the 525] until we said we're done, but that rotor wasn't done,” said Josh O'Neill, senior manager for technology and evaluation on the Bell 525 program. “So we went not just 201 knots. It was a good bit more than that.” The 525 Relentless was the first aircraft Bell designed “totally in the 3D space,” O'Neill said, and the Invictus is similarly using a digital thread, enabling things like virtual reality maintaining exercises to provide design feedback without a physical product. “You have a digital thread, the same part that's used when you design your aircraft is used in the maintenance training, used throughout the product,” said O'Neill. “You design the aircraft in 3D, lay out all the systems and you're able to go in there with an actual maintainer. So we pulled [a line maintainer] and had him put the gloves on and go maintain the aircraft. And you can see in the 3D space, I need to reach around this piece, I need to turn my hand in a way that the human hand doesn't like to be turned. So we need to move that item.” As a fly-by-wire aircraft designed with a modular open systems architecture (MOSA) approach, Bell believes Invictus will provide the Army with an path to autonomy — or enable a single person in the aircraft to focus on mission functionality — similar to Bell's approach with the V-280 Valor, its offering for the Future Long-Range Assault Aircraft (FLRAA) competition. Bell officials said they are currently introducing autonomous flight software and performing software regression tests for that aircraft and intend to begin autonomous flight tests within the next few months. In March 2020, when the Army narrows the FARA competition from five companies to two, Bell's team will be nine months into design. After that, two of the five designs — selected from Sikorsky, Bell, Karem Aircraft, AVX/L3Harris, and Boeing — will be selected to participate in a fly-off slated for the second half of 2022. The Army hopes to field the first FARA aircraft in 2028. https://www.aviationtoday.com/2019/12/15/bell-invictus-offer-army-lower-risk-path-fara-capabilities/

  • Pacific force’s wish list seeks $11 billion more than defense proposal

    March 20, 2024 | International, Land

    Pacific force’s wish list seeks $11 billion more than defense proposal

    Indo-Pacific Command says it faces an $11 billion funding gap for regional military construction, space programs, munitions and Guam missile defenses.

  • Contract Awards by US Department of Defense - December 31, 2018

    January 2, 2019 | International, Aerospace, Naval, Land, C4ISR, Security

    Contract Awards by US Department of Defense - December 31, 2018

    ARMY Great Lakes Dredge & Dock Co. LLC, Oak Brook, Illinois, was awarded a $92,551,470 firm-fixed-price contract for channel improvement project, entrance channel with extension, and dredging. Bids were solicited via the internet with two received. Work will be performed in Corpus Christi, Texas, with an estimated completion date of Jan. 31, 2020. Fiscal 2016, 2017, 2018 and 2019 operations and maintenance; general construction; and non-federal funds in the combined amount of $92,551,470 were obligated at the time of the award. U.S. Army Corps of Engineers, Galveston, Texas, is the contracting activity (W912HY-19-C-0002). BAE Systems Ordnance Systems Inc., Radford, Virginia, was awarded an $89,520,585 modification (0053 09) to contract W52P1J-11-G-0053 for operations and maintenance of Radford Army Ammunition Plant. Work will be performed in Radford, Virginia, with an estimated completion date of Dec. 31, 2019. Fiscal 2010, 2016 and 2017 other procurement, Army funds in the combined amount of $8,929,605 were obligated at the time of the award. U.S. Army Contracting Command, Rock Island Arsenal, Illinois, is the contracting activity. BAE Systems Ordnance Systems Inc., Kingsport, Tennessee, was awarded a $74,756,071 modification (P00678) to contract DAAA09-98-E-0006 for Building G-3 NQ/RDX recrystallization construction at Holston Army Ammunition Plant. Work will be performed in Kingsport, Tennessee, with an estimated completion date of Nov. 30, 2021. Fiscal 2018 other procurement, Army funds in the amount of $74,756,071 were obligated at the time of the award. U.S. Army Contracting Command, Rock Island Arsenal, Illinois, is the contracting activity. Honeywell International Inc., Phoenix, Arizona, was awarded a $20,335,554 modification (P00100) to contract W56HZV-12-C-0344 for hardware services. Work will be performed in Phoenix, Arizona, with an estimated completion date of Dec. 31, 2019. Fiscal 2019 other procurement, Army; and Army working capital funds in the amount of $20,335,554 were obligated at the time of the award. U.S. Army Contracting Command, Warren, Michigan, is the contracting activity. STG Inc.,* Reston, Virginia, was awarded a $17,098,410 modification (P00011) to contract W91RUS-18-C-0007 for information technology support services. Work will be performed in Fort Huachuca, Arizona, with an estimated completion date of June 30, 2019. Fiscal 2019 operations and maintenance Army funds in the amount of $17,098,410 were obligated at the time of the award. U.S. Army Contracting Command, Aberdeen Proving Ground, Maryland, is the contracting activity. Melwood Horticultural Training Center Inc., Upper Marlboro, Maryland, was awarded a $9,986,235 modification (P00014) to contract W91QV1-18-C-0008 for base operations. Work will be performed in Fort Meade, Maryland, with an estimated completion date of June 30, 2019. Fiscal 2019 operations and maintenance funds in the amount of $9,986,235 were obligated at the time of the award. U.S. Army Mission and Installation Contracting Command, Fort Belvoir, Virginia, is the contracting activity. AIR FORCE DynCorp International LLC, Fort Worth, Texas, has been awarded a $75,020,715 firm-fixed-price contract for rotary wing aircraft maintenance. This contract provides for services to support all management, personnel, equipment and services necessary to perform 811th Operations Group rotary wing flight line maintenance. Work will be performed at Joint Base Andrews, Maryland, and is expected to be complete by June 30, 2024. This award is the result of a competitive acquisition and five offers were received. Fiscal 2019 operations and maintenance funds in the amount of $28,555, are being obligated at the time of award. 11th Contracting Squadron, Joint Base Andrews, Maryland, is the contracting activity (FA2860-19-C-0005). (Awarded Dec. 27, 2018) Pinnacle Solutions Inc., Huntsville, Alabama, has been awarded a $20,562,123 firm-fixed-price modification (P00040) to previously awarded contract FA8621-16-C-6281 for support of the KC-10 training system. This modification provides for the exercise of the fourth year option and incorporates within scope changes to contractual requirements resulting from a mutual agreement of the parties, and brings the total cumulative face value of the contract to $100,583,419. Work will be performed at Travis Air Force Base, California; Joint Base McGuire-Dix-Lakehurst, New Jersey; and Fairfield, California. Work is expected to be complete by Dec. 31, 2019. Fiscal 2019 operations and maintenance funds in the amount of $20,316,980 are being obligated at the time of award. Air Force Life Cycle Management Center, Wright-Patterson AFB, Ohio, is the contracting activity. *Small business https://dod.defense.gov/News/Contracts/Contract-View/Article/1722766/source/GovDelivery/

All news