Back to news

June 7, 2019 | Local, Aerospace

Tweaked Terms For Canada Future Fighter Help F-35 And Rivals

Four years after successfully campaigning, in part, on a critique of the previous government's selection of a new fighter for the Royal Canadian Air Force (RCAF) without first holding a competition, Prime Minister Justin Trudeau's staff is finding out just how difficult the task can be. In an extended series of drafts released to industry since October, the Public Services and Procurement Canada (PSPC) agency has rewritten key provisions of the original solicitation, with ...

https://aviationweek.com/defense/tweaked-terms-canada-future-fighter-help-f-35-and-rivals

On the same subject

  • General Dynamics to Establish Centre of Excellence for Remotely Piloted Aircraft Systems Technologies in Québec

    August 24, 2021 | Local, Aerospace

    General Dynamics to Establish Centre of Excellence for Remotely Piloted Aircraft Systems Technologies in Québec

    /CNW/ - General Dynamics Mission Systems–Canada announced today the establishment of a Centre of Excellence in Sherbrooke for remotely piloted aircraft systems...

  • Government of Canada to invest in eight search and rescue lifeboats for Canadian Coast Guard

    December 7, 2018 | Local, Naval

    Government of Canada to invest in eight search and rescue lifeboats for Canadian Coast Guard

    December 6, 2018 - Gatineau, Quebec - Public Services and Procurement Canada The Government of Canada is committed to getting the Canadian Coast Guard the equipment it needs to keep Canadian waterways safe and provide meaningful economic opportunities for Canadian shipyards. On behalf of the Canadian Coast Guard, Public Services and Procurement Canada is acquiring eight new high-endurance search and rescue (SAR) lifeboats from Chantier Naval Forillon of Gaspé, Quebec, and Hike Metal Products of Wheatley, Ontario. Chantier Naval Forillon and Hike Metal Products were already producing six SAR lifeboats each under existing contracts signed in 2015. Under the amended contracts, each shipyard will build four additional lifeboats at a total cost of $61,757,896. These contracts were awarded under the small vessel component of the National Shipbuilding Strategy and will help maintain well-paying, middle-class jobs at both shipyards. With the ability to operate up to 100 nautical miles from shore, these new high-endurance SAR lifeboats are enhancing the Coast Guard's search and rescue capabilities. Vessels from this class are named after bays in Canada and are being built under the Federal Infrastructure Initiative, the Fleet Renewal Plan and Oceans Protection Plan. Quotes “Our government is providing the women and men of the Canadian Coast Guard with the modern equipment they need through the National Shipbuilding Strategy. At the same time, we are creating good middle class jobs and strong business opportunities for the Canadian marine sector.” The Honourable Carla Qualtrough Minister of Public Services and Procurement and Accessibility “Through the National Shipbuilding Strategy and Oceans Protection Plan, we are providing members of the Canadian Coast Guard the equipment they need to keep Canadian waters and those who use them safe. The addition of these new lifeboats will also create more jobs for Canadians and enhance the Coast Guard's capacity as a leader in maritime safety.” The Honourable Jonathan Wilkinson Minister of Fisheries, Oceans and the Canadian Coast Guard Quick facts Chantier Naval Forillon in Gaspé, Quebec, won a $45.8-million contract in July 2015 to build six vessels. This contract created 25 new jobs, as well as sustaining approximately 35 jobs. Hike Metal Products in Wheatley, Ontario, won a $43.4-million contract in July 2015 to build six vessels. This contract created and sustained 45 jobs. To date, four new high-endurance SAR lifeboats have been delivered to the Coast Guard. SAR lifeboat stations are operated by highly-trained Canadian Coast Guard personnel, who are well-equipped to respond to marine incidents in near-shore areas. Under the $1.5 billion Oceans Protection Plan, seven new lifeboat stations are being built, contributing to safer waters and coasts across Canada. https://www.canada.ca/en/public-services-procurement/news/2018/12/government-of-canada-to-invest-in-eight-search-and-rescue-lifeboats-for-canadian-coast-guard.html

  • PropWorks: Sustained growth over 2 decades

    December 18, 2019 | Local, Aerospace

    PropWorks: Sustained growth over 2 decades

    by Ken Pole Ever since French engineer Henri Giffard flew a hydrogen-filled dirigible 27 kilometres from Paris to Elancourt in September 1852, the propeller was for nearly a century the only way to sustain powered flight. It would be another 51 years before Orville and Wilbur Wright used this “airscrew” technology in the first flight of a powered fixed-wing aircraft at Kitty Hawk, N.C. The Wright brothers also came up with the idea of adding a twist to each blade, giving a more consistent angle of attack. Despite the advent and evolution of jets since the early 1940s, propellers have remained the preferred option for smaller aircraft. But, as with all things mechanical, they require maintenance and repair. That has enabled Winnipeg-based PropWorks Propeller Systems Inc. to become the largest company of its kind in Western Canada. “Winnipeg is where we started, on the fringe of James Richardson International Airport,” company president Jim Ross, one of the founding investors, told Skies. “The company was incorporated in October 1999 and we moved into our building in December 1999.” Winnipeg is home to about two-thirds of the total staff of 30 with the rest at its shop in Edmonton. PropWorks is now privately held by Ross along with a pair of Calgary-based investors, Lorne Gray, who owns the Aircraft Canada sales and appraisal firm, and AvMax Group Inc. “I'm the only constant,” he laughed, quickly adding that some of his employees also are long-term. Before the company was founded, Ross spent 15 years with Cessna Aircraft Co., doing finance and some marketing until it shut down its Winnipeg facility in 1992. So he began marketing for several aviation-related companies, one of which was Western Propeller. When Western decided to close the Winnipeg facility seven years later, to focus on their Edmonton and Vancouver centres, Ross and an original group of investors bought the equipment, moved it into a leased 6,500-square-foot building and began operations with just five employees. It relocated to a new 12,000-square-foot building in April 2015. The Edmonton shop, which opened in December 2006, was moved in December 2017 to a 14,000-square-foot building at Villeneuve Airport, the area's main general aviation and flight training hub. PropWorks' employees, whose experience tallies up to more than 150 years, provide services which “meet or exceed” original equipment manufacturers' specifications. “Sometimes we'll go an extra step with such things with non-destructive testing that we feel gives our customers a bit of added comfort,” Ross explained. “We have a dedicated non-destructive testing room” where blades, hubs and related components are tested before propellers are reassembled and balanced. NDT procedures include magnetic particle inspection, liquid penetrants, eddy current and ultrasonic inspection. In addition to being an Avia Propeller Service Centre, PropWorks overhauls and repairs most models of Hamilton Standard, Hamilton Sundstrand, McCauley, Dowty, MT, Sensenich and Hartzell propellers. (On a historical note, Ohio-based Hartzell dates to 1917 when Robert Hartzell, a pilot whose family owned a hardwood lumber factory and who had noticed a high failure rate in wood propellers, began producing hand-carved walnut units at the suggestion of longtime friend Orville Wright.) To this day, Hartzell prizes and cultivates customer loyalty in having built its global reputation, and so does PropWorks, which has customers in Canada, the U.S. and around the world. Ross said that as with most businesses, “it's about the people as much as the product.” One of his people is director of maintenance Mike Hudec, who had been with Western Propeller and now is his longest-term employee. Cliff Arntson, manager in Edmonton and Mike Wagner, assistant manager in Edmonton have a combined 84 years experience with propellers. Much of the U.S. business is with customers in the border markets of Minnesota and the Dakotas. PropWorks has three trucks which pick up the propellers for work in Winnipeg and Edmonton. “Our customers like that service,” said Ross. His most distant customer is AvMax, which has a base in Nairobi, Kenya, and he has other large customers primarily Canada and U.S. based. PropWorks draws on a variety of sources for its employees, including the Stevenson Campus of Red River College in Winnipeg. They come out of the aviation maintenance engineer (AME) stream but are not certified AMEs because they haven't gone through the requisite apprentice program when they join PropWorks. “They can't do that in a propeller shop because that wouldn't give them a broad enough base to qualify as AMEs,” said Ross. “There's no AME licence for propellers; there was at one time but not for many years now.” The general preference is “somebody with a good mechanical aptitude who we can put in our own training program,” he added. “It takes one to two years for them to become proficient.” Asked to explain the difference between overhaul and repair, Ross said the former involves disassembly, discarding parts mandated for replacement, installing new ones and then putting the entire assembly through NDT before it's painted, reassembled and balanced. That means it's a “zero time” propeller when it leaves the shop. Repairs, on the other hand, can involve a range of things such as dealing with blade nicks or leaking hub seals. If that's all that is done, the propeller leaves the shop as “time continued.” Like everything in aviation, propellers have long since evolved since those early fixed wood two-bladed configurations. “The simple ones nowadays are the fixed-pitch propellers that you'd see on your most basic flight training airplane,” said Ross, who is part-owner of a Cessna 172 and has about 1,000 hours logged. “Then it goes all the way up, through two-bladed constant-speed propellers to three-, four- and even five-bladed propellers.” The most complex ones are Hamilton Sundstrand propellers on the Dash 8 twin turboprop introduced by de Havilland Canada in 1984 and last built by Bombardier Aerospace in 2005. “They simply take more time,” said Ross. Then there are some which can justifiably called vintage, such as the Hamilton Standard three-bladed propellers on Second World War-era Douglas DC-3s but these are “fairly standard.” Ross noted that PropWorks donated one for the equally old North American Harvard Mark II in the Commonwealth Air Training Plan Museum in Brandon, Man. The company is doing more composites, a capacity which required “a substantial investment” in equipment, including an autoclave to heat the laminates. Asked what the future might hold, Ross replied that while “we've just had our best year ever,” he hesitated to predict the “hectic” growth of the past 10 years would continue. “The key to growth is not necessarily going out to find new customers. It's adding to our capabilities – that way more customers are likely to send their work to us.” While he could only guess at the number of corporate or private propeller-driven aircraft in Canada, he did venture that “it's not a dying market” which bodes well for the future. https://www.skiesmag.com/news/propworks-sustained-growth-over-2-decads

All news