Back to news

June 10, 2020 | Local, Land

Rheinmetall and Lockheed Martin join forces in bid to win Canadian Army Land Vehicle Crew Training System program

June 5, 2020 - Army's Land Vehicle Crew Training System (LVCTS) project. Rheinmetall Canada will take the lead in a partnership that includes Lockheed Martin Canada, Rheinmetall Electronics of Bremen, Germany, and Lockheed Martin Training and Logistics Solutions in Orlando, Florida.

In cooperation with its partners, Rheinmetall Canada will offer the Canadian Army a solution for the LVCTS project that is mature, modular, and cost effective, while ensuring high-value economic benefits to Canada.

The LVCTS solution will enable the Canadian Army to conduct progressive training at the individual, crew, platoon, and higher echelon levels using high- to medium-fidelity reconfigurable trainers, as well as standard trainee workstations combined with a robust virtual environment and a comprehensive instructional system.

The software will be common to all levels of training and designed to generate increasingly challenging situations, including the ability to realistically simulate various terrain types, weather conditions, capabilities, and tactics.

The instructional system will score crews to a doctrinal standard at all levels of complexity. Individual Crew Training Systems (CTSs) will be linked through the Distributed Interactive Simulation (DIS) protocol and High-Level Architecture (HLA) gateways to provide section, platoon, or higher echelon training.

The system will also include a learning management system that allows for customization of training scenarios, monitoring of trainee progress, and after-action review.

As Pietro Mazzei, Vice-president, Rheinmetall Canada, notes, “This partnership combines two of the world's leading providers of military training solutions in order to supply the Canadian Army with the most advanced modular system. Rheinmetall and Lockheed Martin have strong global track records when it comes to supplying and supporting leading-edge systems for precision gunnery and crew task training. We look forward to bringing this expertise to the Canadian Army.”

“Lockheed Martin Canada is proud to partner with Rheinmetall on an LVCTS solution for the Canadian Army”, says Lorraine Ben, Chief Executive, Lockheed Martin Canada. “Building on 80 years of support to the Canadian Armed Forces, we look forward to leveraging our team's skills and experience, including in world-class simulation and training systems. This partnership connects industry-leading technology with Canadian expertise for a critical land training capability in Canada for decades to come.”

Lockheed Martin Training and Logistics Solutions is a leading provider of Army training solutions worldwide including the world's two largest virtual collective training systems—the U.S. Army's Close Combat Tactical Trainer (CCTT) and the UK Combined Arms Tactical Trainer (UK CATT).

About Rheinmetall Canada

Rheinmetall Canada is the Canadian arm of Germany's Rheinmetall Group, Europe's largest supplier of systems and equipment for armed forces and security services.

With employees at locations in Saint-Jean-sur-Richelieu in Québec and Ottawa in Ontario, Rheinmetall Canada has accumulated over three decades of expertise in system integration, real-time command and control software development, and communication solutions.

Serving as prime contractor, Rheinmetall Canada has also managed several major Canadian Army programs such as the Leopard 2 repair and overhaul, medium range radar, integrated soldier system, and satellite communications on the move.

About Lockheed Martin Canada

Headquartered in Ottawa, Lockheed Martin Canada is the Canadian unit of Lockheed Martin Corporation, a global security and aerospace company that employs some 110 000 people worldwide.

Lockheed Martin Canada has been Canada's trusted defence partner for 80 years, specializing in the development, integration, and sustainment of advanced technology systems, products, and services.

The company has around 1000 employees at major facilities in Ottawa, Montreal, Halifax, Calgary, and Victoria, working on a wide range of major programs spanning the aerospace, defence, and commercial sectors.

About Rheinmetall Electronics

Rheinmetall Electronics GmbH supplies mission systems and simulation solutions to military, governmental, and commercial customers. Its simulation and training solutions range from fundamental e-learning and basic part-task training all the way up to fully network-enabled training systems or complex training centres to ensure excellent performance of soldiers, airmen, and sailors in their future missions. Rheinmetall Electronics has delivered customized solutions to global customers including the Mechanized Training Centre in Thun, Switzerland, and the Leopard 2 Gunnery Skills Trainer and Driving Simulator in Canada and Indonesia. Its portfolio encompasses reconnaissance, fire control, soldier, and command systems, guided weapon platforms, as well as training, learning, and engineering applications for individuals, teams, and entire customer organizations. Customers in more than 40 countries rely on technology from Rheinmetall Electronics.

RHEINMETALL AG
Corporate Sector Defence
Press and Information
Oliver Hoffmann
Rheinmetall Platz 1
40476 Düsseldorf
Germany
Phone: +49 211 473-4748
Fax: +49 211 473-4157

View source version on Rheinmetall : https://www.rheinmetall-defence.com/en/rheinmetall_defence/public_relations/news/latest_news/index_24000.php

On the same subject

  • CREAFORM HANDYSCAN 3D SCANNER MEETS BOEING’S REQUIREMENTS

    May 31, 2019 | Local, C4ISR

    CREAFORM HANDYSCAN 3D SCANNER MEETS BOEING’S REQUIREMENTS

    Metrology-grade 3D laser scanner can now be used to inspect dents and blends on all models of Boeing commercial airplanes Creaform, the worldwide leader in portable 3D measurement solutions and non-destructive testing (NDT) solutions, announced today that its HandySCAN 3D™ metrology-grade 3D laser scanner can now be used for recording physical attributes of aircraft dents and blends on all models of Boeing commercial airplanes. Boeing has released a service letter with guidance on the use of 3D scanners for measuring dents and blends on airplanes. The SmartDENT 3D™ solution and the flagship HandySCAN 3D scanner were used in the process of guiding Boeing's quality requirements for the service letter. “Creaform is proud to see leaders such as Boeing, turn to 3D scanning solutions for surface defect inspection. With SmartDENT 3D, our goal is to provide the most accurate damage assessment to our customers, so they can make informed and safe decisions, while getting their aircraft back flying with minimal down time,” said Jérôme Beaumont, Global NDT Business Manager at Creaform. Overview of SmartDENT 3D benefits: Speed: 80 times faster than the pit gauge technique. It is the fastest and most reliable aircraft surface damage inspection tool available on the market. Metrology-grade measurements for aircraft maintenance: The scanner is accurate to 0.025 mm (0.0009 in.) and has a resolution of up to 0.100 mm (0.0039 in.) with high repeatability and traceable certificate. Intuitive pass/fail assessments: With its intuitive design and real-time software visualization, Creaform's NDT solutions ensure short learning curves and minimal operator experience influence on the accuracy of results. Live visualization and portability: Weighting less than a kilo, the handheld scanner is the perfect tool for work in hangars or directly outdoors. Users can easily perform 3D surface inspection of any part of an aircraft on which they would use manual techniques—including on and under wings. In addition to complying with Boeing's service letter, Creaform HandySCAN 3D scanners are listed in the Airbus Technical Equipment Manual, which is referenced in its Structure Repair Manual. Quality engineers and MRO operators looking to improve their turnaround times and profitability can contact Creaform to find out more about its NDT solutions. https://www.creaform3d.com/en/news/creaform-handyscan-3d-scanner-meets-boeings-requirements

  • Trouble with transitions

    August 1, 2018 | Local, Aerospace

    Trouble with transitions

    Posted on August 1, 2018 by Chris Thatcher Forgive BGen Michel Lalumiere if he begins to sound like a broken record. But his answer to any question about Air Force development and new capabilities–a new information network, fifth-generation fighter jet data fusion, remotely-piloted aircraft surveillance systems, enhanced search and rescue sensors, or the future of anti-submarine warfare systems–always begins with one word: people. The Liberal government's defence policy of 2017 put some much-needed funding and a “lot of clarity” behind a lengthy list of Royal Canadian Air Force (RCAF) major and minor capital projects, everything from space-based maritime domain awareness and satellite communications, to air-to-air refuelling tankers, multi-mission aircraft and modernized helicopters. But in an Air Force of just over 15,000 personnel, military and civilians, the transition from a legacy aircraft to a new one–or even the modernization of an existing platform with improved systems–can quickly strain the training and operational squadrons. Temporarily surging a capability as the RCAF did with unmanned aerial systems in Afghanistan is one thing; sustaining it for a longer period is another. And as much as Lalumiere, the director general of Air Force Development, might wish to hit a pause button to allow aircrews, maintainers and logistics specialists the time to bring a new platform into service, the reality is that RCAF Wings have never been busier. And ensuring a level of high readiness for operations trumps all. So, the first question when weighing the merits of any acquisition or upgrade project, which average around seven years to complete, is always the same: How will it impact people? Automation and artificial intelligence may one day lighten the workload, but for now every platform, even unmanned systems, remains people intensive. Any transition fraught with additional personnel requirements presents a problem. “It's always about people because we're definitely not that automated yet,” Lalumiere told RCAF Today in a recent wide-ranging interview. “We think about people first ... and we have to prepare well in advance for all of these transitions.” The RCAF views existing platforms and acquisition projects through a lens of AIR Power: Agility, integration, reach and power. That translates as an ability to perform a variety of missions with a single platform over great distance while integrating seamlessly with allies, other agencies and sister services. But it equally applies to maintenance, logistics, procurement, data architecture, information management, and other enabling systems–even government policy. An advanced fighter jet will not achieve its expected performance if what the military calls key “enablers” and supporting systems are not equally advanced. “What does it mean to build a fifth-generation air force? It quickly goes beyond the fighters,” acknowledged Lalumiere. “A lot of what the fighter needs to operate at that level actually comes from the rest of the Air Force. It's a very fundamental question from an organization perspective, because it means important investment: People and money. We think money is the hard part; it's actually people.” Daunting as that might seem, the Air Force has been here before, he noted. In previous eras of change, it has made decisions about the capabilities in which it would invest. “We have tough choices to make,” he said about the list of projects. “But we don't have all the capabilities today that we might have described a decade or 20 years ago because we [recognized] we would have to pick and choose.” Future Aircrew Training Near the top of the project list is Future Aircrew Training (FAcT), a program that has evolved in recent years to encompass not only pilot training but also air combat systems officers (ACSO) and airborne electronic sensor operators (AESOPs). Pilot training is currently delivered under two contracted programs, NATO Flying Training in Canada (NFTC) and Contracted Flying Training and Support (CFTS), while ACSOs and AESOPs are developed at 402 Squadron at 17 Wing Winnipeg, Man. NFTC and CFTS are scheduled to phase out in 2023 and 2027, respectively. Incorporating ACSOs and AESOps under the same umbrella as pilot training is a way to better manage available training aircraft, instructors and course standards, and recognition that the current practice of integrating the three trades at the operational training unit is too late in the process and needs to begin much earlier, Lalumiere explained. The RCAF has sought information from industry at regular intervals since 2013 on how the program should be structured and delivered. In early May, the government hosted a multi-day session with companies to brief on the planned procurement approach, key milestones and core requirements, and hold one-on-one meetings. One of the objectives, said Lalumiere, is to capitalize on the experience companies have gained in recent years providing training services in Canada and globally. Many are now able to offer solutions that weren't possible when the RCAF first initiated discussions almost a decade ago about future aircrew training. Of note, CAE and KF Aerospace, the two prime contractors for NFTC and CFTS, in May announced a joint venture called SkyAlyne to develop and deliver military aircrew training in Canada. While the two companies continue to manage the existing programs, the joint venture will focus on building synergies between them. Among the FAcT requirements is an increase in the throughput of all three trades. But that will create a demand for more trainers. Aircrew training today is primarily provided by serving qualified flight instructors, but the door is open for a greater mix of military and contracted instruction, he said. The RCAF is also seeking input from industry on the location and quantity of training centres and possible consolidation. To aid industry with their eventual proposals, “we have a few studies ongoing that try to describe the airspace capacity over those training areas and what we can do within that,” added Lalumiere. But what concerns him most is the transition phase. “All of this will have to be seamless,” he said, noting that both the legacy and new programs might overlap at the same locations for a period, again creating a huge demand on people. Strategic Tanker Transport Capability The RCAF had also planned to hold off on a decision on the next air-to-air refuelling tanker until after the next fighter jet was announced. However, as most replacement contenders are capable of fuelling whichever aircraft is acquired and could interoperate easily with allies, the STTC project is now a higher priority. One of the reasons for that is the lack of agility with the five CC-150 Polaris aircraft. Just two are fitted for tanking and both are probe and drogue; two more provide passenger and cargo transport, and the fifth is fitted for strategic government transport. A recent report prepared for the RCAF on the health of the Polaris found the “fleet is doing well, but the [aircraft are] not interchangeable,” said Lalumiere. That lack of agility and interoperability with allies is driving requirements for both boom and probe and drogue refuelling systems, and for greater sensor and network interoperability. The RCAF plans to retire its four H-model CC-130 Hercules tankers, operated by 435 Transport and Rescue Squadron at 17 Wing Winnipeg, in 2020/2021. So, whether the CC-150 replacement requires five, six or more aircraft remains to be seen. To address Lalumiere's perpetual people challenge, the Air Force would like a jet with the endurance to reach any destination on one fuel stop, though he said a market analysis would inform what's possible. “If we do two [or] three fuel stops, and my crew day is actually over after one fuel stop, we need to put split crews at these stops,” he observed. “We need to be more effective.” Canadian Multi-Mission Aircraft Arguably one of the more captivating projects on the Air Force Development list is CMMA. Originally billed as a replacement program for the CP-140M Aurora long range patrol aircraft, Air Force officials have now indicated the eventual solution could be a mix of aircraft. Recently retired RCAF commander LGen Mike Hood spoke often at public events and in interviews of transferring much of the world-leading ISR (intelligence, surveillance, reconnaissance) and anti-submarine warfare technology on the Aurora to a Bombardier-built platform. But at an industry outlook in April, officials suggested rather than a one-for-one platform replacement, CMMA could be a mix of manned and unmanned aircraft. “It's been pretty amazing what has been accomplished with the CP-140,” said Lalumiere. But “I think the [future] challenges will be of such a magnitude that we will have to come to them with a holistic set of capabilities.” Rather than a single project with a start and finish date, he said the more likely scenario is a rolling introduction of platforms and systems with open architecture to match the pace of technology. “We can phase in what we need when it's ready and we can continue phasing in as the next capabilities become ready.” Remotely-Piloted Aircraft System Once known as the Joint Unmanned Surveillance Target Acquisition System, or JUSTAS, the project to acquire a remotely piloted aircraft (RPAS) now has a more accessible name. But the requirements remain largely the same. Today, though, industry is better equipped to meet them. Lalumiere believes the market has evolved since the RCAF first stood up a project office in 2005 to look at a medium altitude, long endurance unmanned capability, to the point where challenges such as operating in unsegregated air space, that once seemed “like mountains,” have now been largely resolved. But the personnel requirements posed by unmanned systems loom large. Managing the data processing, exploitation and dissemination (PED) generated by the sensor suite in a long range and long endurance capability–which is the true force multiplier aspect, he noted–requires a sizeable force. “This will be the keystone project that will initiate the delivery of a sustainable PED capability by the RCAF,” he said. “[My staff] have not agreed on how many trades they've been describing to me, but I know we are already into double digits,” he added of the number of people required to stand up a squadron and sustain the capability, including the distribution of data, from a main operating base and forward locations in Canada and on international missions. One key question still to be answered is whether the RPAS solution is one platform capable of ISR and target acquisition and strike missions, or two with distinct domestic and expeditionary configurations and payloads. “The analysis work is looking at that,” he said. But whatever is acquired must be interoperable and able to share data with 5 Eyes (Canada, U.S., U.K, Australia and New Zealand), NATO and coalition allies, a process that likely has defence policy implications, he added. Griffon Limited Life Extension Replacement of the CH-146 Griffon may provide the next major helicopter procurement opportunity for industry–and with some intriguing possibilities. The RCAF, National Defence and Bell have been closely monitoring the structure of the 20-year-old utility helicopter and believe it can continue to perform “yeoman's work” in conflict zones from Afghanistan to Haiti, Iraq and Mali until the early 2030s with a limited life extension. The project would address several obsolescence issues with avionics and other onboard systems, meet new regulatory requirements, and improve connectivity. But the RCAF is also looking beyond 2030 to the eventual replacement. Like CMMA, the eventual solution might not be a single aircraft but rather a “tactical system,” observed Lalumiere, with the agility, integrated weapons and sensors, satellite connectivity, and endurance to fulfill a range of roles from escort and transport to close air support and perhaps attack. “Is it going to be only one aircraft or is it becoming a system? I'm going to be fascinated by the answer.” Fixed-Wing Search and Rescue With a new search and rescue airplane selected in the Airbus CC-295W, the RCAF has completed one of the lengthier procurement processes and is now into delivery of the first aircraft in 2019 and construction of a new search and rescue training centre at 19 Wing Comox. Though the CC-295W is expected to be a game-changing capability, its entry into service underscores Lalumiere's people management challenges. SAR is a 24/7, year-round, high-readiness service that can't be disrupted. Yet over the next few years, fixed-wing and rotary-wing aircrew training, new simulators, the Canadian Forces School of Search and Rescue, and training provided to CC-130H crews in Trenton will all be consolidated into a single, effective and holistic schoolhouse. “Part of the decision to acquire the CC-295W was also the retirement of the H model Hercs, including the tanker models,” he explained. “The plan is to transition [those aircrews] to FWSAR,” allowing the RCAF to maintain a high-readiness posture while simultaneously undergoing training on the new and upgraded aircraft. “These crews will help us achieve that success.” TIC3 Air Underpinning the success of many of these new and pending platforms is a little-known project called Tactical Integrated Command, Control, Communications – Air (TIC3-Air). Historically, the RCAF has purpose-built its data links for each expeditionary operation or domestic exercise, forming ad hoc networks to move, process and access the data generated by aircraft mission systems and payload sensors. TIC3 Air aims to build a more durable information highway, including establishing permanent Link-16 ground entry stations at locations across Canada. The project also involves modernized traffic management and air defence radios and cryptography. The challenge, said Lalumiere, is that no sooner has the project team defined a capability then the technology improves and “new needs start to surface.” TIC 3 Air will “clean up” and optimize the various systems, he said, but it, too, will draw significantly on RCAF professional personnel at its core for success. “We will ensure that this capability will be integrated in the larger enterprise ground IT infrastructure supporting the [Canadian Armed Forces]. This remains a key priority in the Information Management Group.” https://www.skiesmag.com/features/trouble-with-transitions/

  • Mid-Project Status Report published: Leonardo led “Canadian Weather Radar Replacement Project” fully on schedule

    March 25, 2020 | Local, C4ISR

    Mid-Project Status Report published: Leonardo led “Canadian Weather Radar Replacement Project” fully on schedule

    Rome, March 23, 2020 - Leonardo, through its German subsidiary Leonardo Germany GmbH, is proud to inform on the successful results of the official “Mid-Project Status Report” for the “Canadian Weather Radar Replacement Project” published by Environment and Climate Change Canada (ECCC). The “Mid-Project Status Report” is established and updated on a yearly basis and summarizes the verification of the conformity between project execution and scheduled targets by the end of each year under review. The “Canadian Weather Radar Replacement Project”, which was awarded to Leonardo in 2016, comprises the design, manufacture, supply, installation, commissioning and training, as well as maintenance and technical support during the warranty phase, for twenty Klystron S-Band weather radars – plus thirteen additional radars in options - including infrastructure for existing and new radar sites running from Holyrood on the East Coast to Vancouver Island on the West Coast of Canada. Seven of the thirteen weather radars originally in options have meanwhile been placed as orders by ECCC. According to the “Mid-Project Status Report” recently published, project execution is fully in line with the scheduled time and cost frames. Twelve weather radars including infrastructure and agreed accessories were delivered. All radars were installed and put into operation precisely according to plan. Additional requirements for safety and increase in performance that had been set by ECCC during the design phase, were successfully implemented by Leonardo. Training and documentation were delivered, and maintenance works performed as scheduled. The cost-management proceeded within the frame of the agreed budget. Prior to the report, Leonardo's performance had been objectively assessed and evaluated according to ECCC's vendor performance evaluation system. The evaluation was conducted by the CWRRP/ECCC team in conjunction with PSPC Contracting Authority, including criteria Quality of Workmanship, Time, Project Management and Health and Safety. In the overall rating, Leonardo achieved a score of 83 of 100 possible points and with this result, one of the highest scores ever awarded in any Public Works and Government Services Canada contract up to now. The pleasantly positive overall results stated at Mid-Project term underpin Leonardo's strengths and excellence in contract execution even in most challenging weather radar projects. The “Canadian Weather Radar Replacement Project” is one of the largest and – especially in terms of technological complexity, infrastructure and environmental requirements - most demanding projects ever awarded to the weather radar industry. Canada is a key market for Leonardo, with interests and opportunities spanning from helicopters to airport solutions such as parcel handling systems and air traffic control systems. A major contract was signed in 2016 to replace the legacy Air Traffic Control (ATC) radars at 12 major Canadian airports including Toronto, Montreal, Ottawa, Vancouver and Calgary. LEONARDO Germany GmbH Leonardo Germany GmbH is the technology leader in weather radar systems worldwide, providing best-in-class systems in C-, S- and X-Band. Over the last 20 years, more than 500 high-end systems of the company's METEOR product line have been put into operation for leading meteorological service providers in over 80 Countries worldwide. Environment and Climate Change Canada Environment and Climate Change Canada is the department of the Government of Canada with responsibility for coordinating environmental policies and programs as well as preserving and enhancing the natural environment and renewable resources. The Meteorological Service of Canada is a division of Environment and Climate Change Canada which primarily provides public meteorological information and weather forecasts and warnings of severe weather and other environmental hazards. View source version on Leonardo : https://www.leonardocompany.com/en/press-release-detail/-/detail/23-03-2020-mid-project-status-report-published-leonardo-led-canadian-weather-radar-replacement-project-fully-on-schedule

All news