Back to news

July 15, 2019 | International, Aerospace

Raytheon awarded $17.8M for computers to launch Navy's anti-radiation missiles

By Allen Cone

July 11 (UPI) -- Raytheon was awarded a $17.8 million contract to deliver 114 computers to launch the U.S. Navy's high-speed anti-radiation missiles.

The contract for the system, known as HARM, will include two pre-production units, one first article test unit and 111 production units in support of the Navy, the Defense Department announced Wednesday.

Work will be performed at Raytheon's plant in Tucson, Ariz., and is expected to be completed in October 2021.

Naval working capital, and fiscal 2017, 2018 and 2019 aircraft procurement funds in the full amount will be obligated at time of award, $6.2 million of which will expire at the end of the current fiscal year.

The CP-1001B/C HARM Command Launch Computer is an electronics subsystem installed on the airframe to interface with the AGM-88 A/B/C HARM Missile.

"Continued hardware and software upgrades have allowed HARM to counter advanced radar threats. HARM has proven itself in both reliability and combat performance," Raytheon said on its website.

HARM's primary mission is designed to suppress or destroy an enemy's surface-to-air missile radar and radar-directed air defense artillery systems. When it is airborne, the 800-pound missile can operate in preemptive, missile-as-sensor and self-protect modes.

The AGM-88 HARM is a joint U.S. Navy and Air Force program developed by the Navy and Raytheon.

The system is employed on a variety of Navy, Air Force and Marine Corpsaircraft, including the EA-6B, F-16 and F/A-18. In addition, the HARM is available to nations through foreign military sales.

The AGM-88 HARM was first involved in combat against Libyan targets in the Gulf of Sidra in 1986. During Operation Desert Storm, U.S. aircraft fired 1,961 missiles against Iraqi targets.

https://www.upi.com/Defense-News/2019/07/11/Raytheon-awarded-178M-for-computers-to-launch-Navys-anti-radiation-missiles/9561562846921/

On the same subject

  • Sikorsky ratchets up robotic control of Black Hawk in runup to pilotless flight

    October 11, 2019 | International, Aerospace

    Sikorsky ratchets up robotic control of Black Hawk in runup to pilotless flight

    Sikorsky has dialed up the autonomous flight control system on an experimental UH-60A Black Hawk to where a pilot can “set it and forget it” during long surveillance missions, another step toward flying the aircraft remotely from the cabin or from the ground without pilots on board. To date, Sikorsky has put 54.5 flight hours on its optionally piloted vehicle (OPV) flight control system, which is designed as a kit that replaces all legacy mechanical controls in existing aircraft with its MATRIX autonomous fly-by-wire controls. It has also run about 30 hours on the ground in the UH-60A, one of the oldest Black Hawks in the Army's inventory, according to chief test pilot Mark Ward. During the first of MATRIX in a Black Hawk in May, Sikorsky focused on the direct mode control scheme, which means the fly-by-wire controls should fly and respond to pilot input like a conventional UH-60 Black Hawk, Ward said. Technically, the mode is “direct stick-to-head with stability augmentation in the loop.” “Direct mode is supposed to be, more-or-less the service mode or an emergency mode, but we found the aircraft behaved quite well throughout all the speed regimes in that mode,” he said. Sikorsky briefly paused the flight test program to “fine tune” some of the pilot control augmentation modes, “so that when we go to autonomy we're going to have a very mature system that goes from full-spectrum of pilot 100 percent in the loop, to autonomy 100 percent in the loop and everywhere in between,” he said. Test pilots have since ratcheted up computer control of the aircraft and expanded the flight envelope out to 150 knots indicated airspeed. Most interestingly, the test team is beginning to increase the level of flight control augmentation beginning with “direct mode.” In “rate command attitude hold” mode, the fly-by-wire system takes over more control of the aircraft, Ward said. That mode was tested through low-speed hover maneuvers out to 150 knots. “When you put a control input, you're controlling a rate or an attitude change and when you release the control, you're capturing that attitude,” he said. From there, test pilots increased autonomous control of the aircraft to the full authority control scheme, or FACS, in which “rather than commanding a rate, you're actually commanding a parameter, such as airspeed or altitude or heading using the control stick,” Ward said. “To change from one mode to the next is simply a button push away to go from direct to rate command, up to FACS and back down,” he said. “Think of full authority as being an ultra-stable ISR platform that is going to be holding flight parameters for very long periods of time,” he said. “You kind of want to set it and forget it. You're not turning knobs on a flight director. You are actually flying the aircraft with the control stick.” “Rate command is when you kind of want to . . . throw it around a little bit, you want to do some low-and-slow or low-and-fast maneuvering where you're going from stop to stop to complete a mission.” Sikorsky uses the phrase “optimally piloted vehicle” as well as “optionally piloted vehicle” when discussing OPV and MATRIX because the ultimate goal is to develop a system that can act as an autonomous co-pilot quietly but constantly aiding human operators during specific missions. The OPV kit is tailored to the UH-60, but is retrofittable onto the Army's entire helicopter fleet and Sikorsky's commercial S-92 and S-97 rotorcraft, according to Igor Cherepinsky, the company's director of autonomy. Sometime in 2020, Sikorsky will demonstrate that the system can be remotely piloted from both inside and outside the aircraft, he said. “We will show the world this system is capable of being operated from the ground,” he said. Sikorsky continues to demonstrate MATRIX on a modified S-76B called the Sikorsky Autonomy Research Aircraft (SARA). The aircraft, which has been in test since 2013, has more than 300 hours of autonomous flight. The company announced in March that its S-92 helicopter fleet update will include the introduction of phase one MATRIX technology, which will allow for autonomous landing. The U.S. Army has plans to outfit a UH-60M with the system but is about six months behind Sikorsky's OPV test program. “Our vision is, obviously, not to replace the pilots, but to augment the pilots,” Cherepinsky said. “Once we field the technology, we never want to see another controlled flight into terrain or degraded visual environment issue accident ever happen with any of our aircraft.” https://www.verticalmag.com/news/sikorsky-ratchets-up-robotic-control-of-black-hawk-in-runup-to-pilotless-flight/

  • U.S. Army Orders Additional Boeing CH-47F Block II Chinooks

    December 5, 2024 | International, Aerospace

    U.S. Army Orders Additional Boeing CH-47F Block II Chinooks

    This contract award follows the U.S. Army’s February announcement that it is moving forward with full-rate production of the CH-47F Block II program.

  • DoD SBIR/STTR Component BAA Open: Army SBIR BAA 21.4, Topic A214-001

    December 8, 2020 | International, Land

    DoD SBIR/STTR Component BAA Open: Army SBIR BAA 21.4, Topic A214-001

    The DoD Small Business and Technology Partnerships Office announces the opening of the following Broad Agency Announcement (BAA): Army SBIR 21.4 • A214-001: Identifying and Enabling Emerging Technology Leaders IMPORTANT DATES: • December 8, 2020: BAA opens, begin submitting proposals in DSIP • December 23, 2020: Topic Q&A (formerly SITIS) closes to new questions at 12:00 p.m. ET • January 12, 2021: BAA closes, full proposals must be submitted in DSIP no later than 12:00 p.m. ET The instructions and topics for these BAAs are available on DSIP at https://www.dodsbirsttr.mil/submissions/login and at https://rt.cto.mil/rtl-small-business-resources/sbir-sttr/. Please be sure to submit your proposals as early as possible in order to avoid unexpected delays due to high volume of traffic during the final hours before BAA close. Report system difficulties to the DSIP Help Desk IMMEDIATELY and include screenshots of any error messages received [NEW!] DSIP Registration and Login Effective August 13, 2020: The DoD SBIR/STTR Innovation Portal (DSIP) is now integrated with Login.gov – a government-wide registration platform that provides a seamless login experience. ALL Small Business Concerns (SBCs) are required to register for a Login.gov account and link it to your DSIP account. If you already have a Login.gov account, simply link your existing account to DSIP. To set up your Login.gov account, click the “Login/Register” button on the DSIP homepage, here: https://www.dodsbirsttr.mil/submissions/login. NOTE: The email address you use for Login.gov should match the email address associated with your existing DSIP account. If you do not recall the email address associated with your DSIP account, or if you already have an existing Login.gov account using a different email address, you will need your Firm's DUNS number and your Firm PIN in order to link your Login.gov account with your DSIP account. If the email address associated with your existing DSIP account has been used for multiple DSIP accounts within your Firm, you will also need your Firm's DUNS number and your Firm PIN in order to link your Login.gov account with your DSIP account. The Firm PIN can be obtained from your Firm Admin. You can view the Firm Admin's contact information by entering your Firm's DUNS number when prompted. If you are the Firm Admin, please ensure that you contact all DSIP users in your Firm and provide them with the Firm PIN. Job Aids and Help Videos are in the Learning & Support section of DSIP, here: https://www.dodsbirsttr.mil/submissions/learning-support/training-materials. ALL SBCs MUST complete your Login.gov setup as soon as possible to avoid delays in submitting proposals in DSIP. After setting up your Login.gov account, take a few minutes to log in and become familiar with DSIP. • Returning users can log in from the DSIP homepage. • For new program participants, follow the steps for New User Registration to create your account in DSIP. Topic Q&A (formerly SITIS) Proposers may submit technical questions through Topic Q&A page at https://www.dodsbirsttr.mil/submissions/login. All questions and answers are posted electronically for general viewing. Topic Q&A will close to new questions on December 23, 2020 at 12:00 p.m. ET, but will remain active to view questions and answers related to the topics until the BAA close. Proposers are advised to monitor Topic Q&A during the BAA period for questions and answers and frequently monitor DSIP for updates and amendments to the topics. Learning & Support Visit the Learning & Support section for Job Aids and Help Videos to guide you through submitting and viewing questions and answers in the Topic Q&A, preparing and submitting your proposal in DSIP, and more: https://www.dodsbirsttr.mil/submissions/learning-support/training-materials DSIP Help Desk Contact Info • Phone Number: 703-214-1333 • Email: DoDSBIRSupport@reisystems.com • Non-Holiday Hours: Monday – Friday, 9:00 a.m. – 5:00 p.m. ET • Please refer to the DSIP homepage for Help Desk availability on holidays. Thank you for your interest in the DoD SBIR/STTR Program. DoD SBIR/STTR Support Team To sign up and receive upcoming emails, please follow this link: https://secure.campaigner.com/CSB/Public/Form.aspx?fid=667492&ac=g9gk https://rt.cto.mil/rtl-small-business-resources/sbir-sttr/

All news