Back to news

November 30, 2024 | International, Land

Otokar Signed an 857 Million Euro Contract to Deliver COBRA II 4x4 armored tactical light vehicles to Romanian Ministry of Defense

On November 27, 2024, Otokar signed the agreement through which Romania’s Ministry of National Defense awarded the company the supply of the 1,059 COBRA II 4x4 light tactical armored vehicles...

https://www.epicos.com/article/892813/otokar-signed-857-million-euro-contract-deliver-cobra-ii-4x4-armored-tactical-light

On the same subject

  • Lockheed Gets Interim Payment for First Multiyear F-35 Contract: Pentagon

    November 15, 2018 | International, Aerospace

    Lockheed Gets Interim Payment for First Multiyear F-35 Contract: Pentagon

    By Reuters WASHINGTON — Lockheed Martin Corp has won a preliminary contract valued at up to $22.7 billion to build a batch of 255 F-35 jets for the U.S. military and its allies, the U.S. Defense Department said on Wednesday. The department said the deal would allow Lockheed to receive $6 billion in funding immediately, a move aimed at preventing major delays in production of the new stealthy fighter jets. This contract is the first to lock in multiyear commitments from U.S. allies as Lockheed anticipates that buying components in larger quantities will help move the price of the most common F-35 jet to below $80 million by 2020. The most common variation of the jet, the F-35 A, had a price of $89.2 million after the most recent round of contract negotiations announced in September. Lockheed is developing and building three models of the new warplanes for the U.S. military and 10 other countries that have signed up to buy the jets: Britain, Australia, Italy, Turkey, Norway, the Netherlands, Israel, Japan, South Korea and Belgium. The Pentagon's chief arms buyer, Ellen Lord, told Reuters on Tuesday that she expected to finalize the interim terms of the deal, known as an "undefinitized contract action" or UCA, with Lockheed, its No. 1 supplier, by the spring of next year. A Lockheed representative said: "This is a smart approach for the taxpayer, the warfighter and for industry." According to the Pentagon, Wednesday's agreement means that U.S. allies buy 149 jets over the three-year period. In the United States' one-year deal, it will buy the remaining 106 jets for delivery beginning in 2020. The U.S. government will continue to buy jets in annual contracts, but is also purchasing components for future-year jets and will also benefit from the economies of scale allowed under the multiyear contract. The three-year deal, known as the "block buy" among the United States and allies, has been said to be worth more than $37 billion and encompass a record 440 jets. Wednesday's contract agrees to a high-water mark of $22.7 billion for all of the 255 jets, but that dollar figure is expected to come down during the negotiations while the jet count is considered a minimum commitment. The interim payment authorized on Wednesday will be deducted from the total contract when the two sides reach a final agreement. The Pentagon is negotiating a separate contract with Pratt & Whitney, a unit of United Technologies Corp, for engines to power the jets. (Reporting by Mike Stone in Washington; Editing by Matthew Lewis) https://www.nytimes.com/reuters/2018/11/14/business/14reuters-usa-lockheed-pentagon.html

  • Israel restocks $190m mortar munitions amidst continuing conflict - Army Technology

    July 30, 2024 | International, Land

    Israel restocks $190m mortar munitions amidst continuing conflict - Army Technology

    Amidst scrutiny for their impact on non-combatants, Israel's tactics in Gaza coincide with Elbit Systems securing a munitions contract.

  • Saab fait voler une pièce de fuselage d’avion de combat imprimée en 3D

    May 17, 2021 | International, Aerospace

    Saab fait voler une pièce de fuselage d’avion de combat imprimée en 3D

    Le constructeur suédois Saab est parvenu, pour la première fois, à faire voler un avion équipé d'une pièce extérieure imprimée en 3D. L'avionneur utilise la technologie de la fabrication additive depuis quatre ans, notamment pour imprimer des pièces internes, précise L'Usine Nouvelle. La pièce, une trappe située sur le flanc arrière du fuselage de l'appareil, un modèle Gripen, a été imprimée sur la base du scan de la pièce originelle. Parfaitement ajustée à l'avion, elle n'a montré « aucun changement structurel visible après le vol d'essai », assure Hakan Stake, responsable du projet, dans un communiqué. Cette démonstration devrait, à terme, « permettre au personnel sur le terrain d'avoir accès à des pièces de rechange ajustées individuellement, d'éviter les réparations d'urgence ou de cannibaliser un appareil déjà endommagé », souligne-t-il. Il estime par ailleurs que cette solution permettra de réduire le nombre de pièces transportées lors du déploiement d'un appareil et de réduire son temps de réparation. De nombreuses étapes de certification du matériau utilisé, un polyamide 2200, couramment utilisé dans la fabrication additive, sont encore nécessaires avant de déployer la technologie sur le terrain. L'Usine Nouvelle du 17 mai

All news