Back to news

May 5, 2024 | Local,

Ministers Blair, Joly, Vandal, and senior defence officials meet with Premiers of Nunavut, Yukon and Northwest Territories

Today, the Honourable Bill Blair, Minister of National Defence, the Honourable Mélanie Joly, Minister of Foreign Affairs, and the Honourable Dan Vandal, Minister of Northern Affairs, met with the Honourable P.J. Akeeagok, Premier of Nunavut; the Honourable Ranj Pillai, Premier of Yukon; and the Honourable R.J. Simpson, Premier of the Northwest Territories.

https://www.canada.ca/en/department-national-defence/news/2024/05/ministers-blair-joly-vandal-and-senior-defence-officials-meet-with-premiers-of-nunavut-yukon-and-northwest-territories.html

On the same subject

  • Trudeau receives review of Canadian Forces intelligence activities and process of establishing national intelligence priorities

    December 24, 2018 | Local, C4ISR

    Trudeau receives review of Canadian Forces intelligence activities and process of establishing national intelligence priorities

    DAVID PUGLIESE, OTTAWA CITIZEN The National Security and Intelligence Committee of Parliamentarians (NSICOP) delivered its first annual report Friday to Prime Minister Justin Trudeau. The report includes the two substantive reviews conducted by NSICOP in 2018, and its related findings and recommendations. NSICOP examined the Canadian government's process for establishing the national intelligence priorities. These priorities serve to direct intelligence organizations in the collection and analysis of intelligence. NSICOP also conducted a review of the intelligence activities of the Department of National Defence and the Canadian Forces. The committee examined the scope of these activities, their legal authorities and the existing oversight mechanisms for their control and accountability. “This annual report marks the first time that Canada has had a committee of Parliamentarians with access to classified material and cleared to examine issues of national security and intelligence,” NSICOP chair David McGuinty said in a statement. Trudeau will now consider whether there is any information in the report, the disclosure of which would be injurious to national security, national defence or international relations, or which includes solicitor-client information. A declassified version of the report must be tabled in Parliament within 30 sitting days, according to the committee's news release. https://ottawacitizen.com/news/national/defence-watch/trudeau-receives-review-of-canadian-forces-intelligence-activities-and-process-of-establishing-national-intelligence-priorities

  • Federal strategy for innovation and growth of Québec regions: nearly $3 million for aerospace SMEs

    November 9, 2018 | Local, Aerospace

    Federal strategy for innovation and growth of Québec regions: nearly $3 million for aerospace SMEs

    GASPÉ, QC, Nov. 9, 2018 /CNW Telbec/ - Aéro Montréal, Québec's aerospace cluster, received $2.977 million in funding today to support the development of the StartAero360° initiative during the launch of the federal strategy for innovation and growth of Québec regions. The Honourable Navdeep Bains, Minister of Innovation, Science and Economic Development and Minister responsible for Canada Economic Development for Québec Regions (CED), made the announcement this morning in Gaspé. This initiative aims to support Québec aerospace technology SMEs in the pre-commercialization phase of their innovative products. The SMEs participating in the initiative will be supported through a structured process, with the aim of collaboratively responding to a business opportunity that requires the development of an industrial proof of concept. This initiative will: Promote and accelerate the adoption of breakthrough innovations on the market; Support entrepreneurship and job creation in Canada by enabling SMEs to grow through the commercialization of new products; Boost the presence of Canadian industry internationally through the adoption and export of new and innovative niche technologies. To develop, aerospace SMEs need to increasingly deal with breakthrough technologies, such as digital technologies, metadata, artificial intelligence, and additive manufacturing. Our role is to provide SMEs with effective tools, in collaboration with both levels of government, to encourage them to adopt breakthrough technologies. "Our technology SMEs are still struggling to get past the pre-commercialization phase, which is necessary to ensure their commercial success. The StartAero360° initiative has been developed to give our SMEs the support they need to pre-commercialize their most innovative products," says Suzanne M. Benoît, President of Aéro Montréal. The StartAero360° initiative aims to support 30 SMEs over 3 years. The program will have a total budget of $4.385 million, of which $1.4 million will be provided by the private sector. About Aéro Montréal Created in 2006, Aéro Montréal is a strategic think tank that groups all major decision makers in Québec's aerospace sector, including companies, educational and research institutions, as well as associations and unions. The activities of Aéro Montréal are made possible thanks to the participation of the governments of Québec and Canadaand the Montréal Metropolitan Community, as well as company members of the cluster. SOURCE Aéro Montréal For further information: Gwenaël Brisé, Manager, Communications and Media Relations, Aéro Montréal, 438 497-3857, gwenael.brise@aeromontreal.ca https://www.newswire.ca/news-releases/federal-strategy-for-innovation-and-growth-of-quebec-regions-nearly-3-million-for-aerospace-smes-700142852.html

  • CREAFORM HANDYSCAN 3D SCANNER MEETS BOEING’S REQUIREMENTS

    May 31, 2019 | Local, C4ISR

    CREAFORM HANDYSCAN 3D SCANNER MEETS BOEING’S REQUIREMENTS

    Metrology-grade 3D laser scanner can now be used to inspect dents and blends on all models of Boeing commercial airplanes Creaform, the worldwide leader in portable 3D measurement solutions and non-destructive testing (NDT) solutions, announced today that its HandySCAN 3D™ metrology-grade 3D laser scanner can now be used for recording physical attributes of aircraft dents and blends on all models of Boeing commercial airplanes. Boeing has released a service letter with guidance on the use of 3D scanners for measuring dents and blends on airplanes. The SmartDENT 3D™ solution and the flagship HandySCAN 3D scanner were used in the process of guiding Boeing's quality requirements for the service letter. “Creaform is proud to see leaders such as Boeing, turn to 3D scanning solutions for surface defect inspection. With SmartDENT 3D, our goal is to provide the most accurate damage assessment to our customers, so they can make informed and safe decisions, while getting their aircraft back flying with minimal down time,” said Jérôme Beaumont, Global NDT Business Manager at Creaform. Overview of SmartDENT 3D benefits: Speed: 80 times faster than the pit gauge technique. It is the fastest and most reliable aircraft surface damage inspection tool available on the market. Metrology-grade measurements for aircraft maintenance: The scanner is accurate to 0.025 mm (0.0009 in.) and has a resolution of up to 0.100 mm (0.0039 in.) with high repeatability and traceable certificate. Intuitive pass/fail assessments: With its intuitive design and real-time software visualization, Creaform's NDT solutions ensure short learning curves and minimal operator experience influence on the accuracy of results. Live visualization and portability: Weighting less than a kilo, the handheld scanner is the perfect tool for work in hangars or directly outdoors. Users can easily perform 3D surface inspection of any part of an aircraft on which they would use manual techniques—including on and under wings. In addition to complying with Boeing's service letter, Creaform HandySCAN 3D scanners are listed in the Airbus Technical Equipment Manual, which is referenced in its Structure Repair Manual. Quality engineers and MRO operators looking to improve their turnaround times and profitability can contact Creaform to find out more about its NDT solutions. https://www.creaform3d.com/en/news/creaform-handyscan-3d-scanner-meets-boeings-requirements

All news