Marines reopen second WWII-era airfield to prep for future combat

On the same subject

• 

  November 18, 2020 | International, Aerospace, Naval, Land, C4ISR

  RUAG International implements full remote supervision support for Live simulation and training system to include AAR

  November 16, 2020 - RUAG Simulation & Training has confirmed its capabilities for full remote monitoring and supervision support for Live training systems on behalf of a European customer. The comprehensive event specifically featured the inclusion of after-action review (AAR) reporting and analysis and was provided to full customer satisfaction. The remote supervision was supported from Switzerland and enabled the customer's scheduled training to proceed in keeping with pandemic guidelines. RUAG Simulation & Training supported army and police forces, deploying force-on-force and Mobile Combat Training Center (CTC) services featuring Gladiator Modular Tactical Engagement Training System. RUAG Simulation & Training's competency for full remote supervision, including data transfer necessary to AAR, was proven within the scope of laser-based force-on-force training exercises. The implementation of the remote protocols was a prerequisite to ensuring highest training fidelity despite COVID-19 pandemic conditions. Remote supervision offset the need for the standard on-site presence of two to four professional supervisors, assuring that international travel from Switzerland was avoided. The customer experienced a reliable and realistic training and a thorough and accurate AAR debriefing, all within their protected training-site environment. The scheduled training, featuring a special operations program, proceeded according to plan, with multiple units and their various specialisations included within the Live system. RUAG's Gladiator Supervision Equipment ensured the data transmitted from positioning and interaction sensors, from the various modules, components and participants comprised in the Mobile CTC Live system, was recorded and analysed for an effective AAR. This achievement strengthened collaboration in an ongoing series of comprehensive laser-based force-on-force trainings commissioned by the customer. The Training-as-a-Service approach included full rental of Gladiator Modular Tactical Engagement Training System components and local consultants for operational system checks and servicing. Together with the customer, the team from RUAG Simulation & Training defined system configuration and component needs to target highest training fidelity and performance accuracy within budget guidelines. RUAG Simulation & Training AG is a professional and trusted partner for Live, Virtual and Constructive (LVC) simulation & training solutions. Combining cutting-edge technology with an unparalleled depth of experience, RUAG develops affordable products tailored to training goals and designed for saving lives and protecting assets in the complex environment of today's and tomorrow's battlefields. Gladiator Modular Tactical Engagement Training Systems enable live conflict scenario simulations to proceed at the highest levels of fidelity. __________________________________________________________ RUAG MRO International is an independent supplier, support provider and integrator of systems and components for civil and military aviation worldwide. It also develops and supports simulation and training systems and solutions for international trained security forces. Highly specialized in the support of aircraft and helicopters throughout their entire life cycle, the company includes maintenance, repair and overhaul services, upgrades, and the development, manufacture and integration of subsystems and components in their service portfolio. In addition, as the manufacturer (OEM) of the Dornier 228, a versatile aircraft for special missions as well as passenger and cargo operations, RUAG International focuses on customer support solutions, including OEM services. Moreover, RUAG MRO International is a developer, OEM and system support provider for simulation and training systems technology for live, virtual and constructive (LVC) training. Complex and flexible functions, and a holistic approach, support realistic training scenarios, adapted to mission goals, at individual, team and unit instruction levels. View source version on RUAG : https://www.ruag.com/en/news/ruag-international-implements-full-remote-supervision-support-live-simulation-training-system

• 

  June 30, 2020 | International, Aerospace

  Army selects eight counter-drone systems for the joint force

  Nathan Strout Following an Army-led assessment, the Defense Department will be narrowing the number of different counter-small unmanned aircraft system solutions deployed by the joint force from about 40 to eight. In November, the defense secretary delegated the Army to lead an effort to reduce redundancy in the development and fielding of various C-sUAS solutions by the services. The Army subsequently set up the Joint C-sUAS Office to conduct that assessment, and over the last few months the office has worked to narrow down the dozens of counter-drone systems fielded by the services. “Our goal is to align existing and future Counter-UAS technology solutions to best address operational needs while applying resources more efficiently,” Maj. Gen. Sean Gainey, the JCO's first director, said during a media call June 26, one day after the assessment results were announced. “This is really why the organization was stood up — to eliminate the redundancy that was being fielded.” That assessment, which Defense Department leadership have approved, looked at approximately 40 systems, about 30 of which were primarily used for the C-sUAS mission, said the director. The assessment concluded that the joint force should move forward with fielding just eight different systems — a variety of fixed, mounted and dismounted solutions. “So essentially moving forward, we will focus our investments,” Gainey said. “The services have each been assigned sponsor of each one of those systems, so as we move this forward as a joint approach, it will coordinate the future upgrades to these systems and the contracting of these systems across the joint force.” C-sUAS systems that were not included in the final selection will be replaced by the approved systems, although JCO could not provide a timeline for how quickly this will take place, how much it will cost or how many units will need to be replaced across the services. Gainley noted that the services are currently conducting an analysis of how many systems will need to be replaced. Of the eight approved solutions, three are fixed, one is mounted and three are dismounted. The approved C-sUAS systems are as follows: 1) Fixed/Semi-Fixed Systems Fixed Site-Low, Slow, Small Unmanned Aircraft System Integrated Defeat System (FS-LIDS), sponsored by the Army Negation of Improvised Non-State Joint Aerial-Threats (NINJA), sponsored by the Air Force Counter-Remote Control Model Aircraft Integrated Air Defense Network (CORIAN), sponsored by the Navy 2) Mounted/Mobile System Light-Mobile Air Defense Integrated System (L-MADIS), sponsored by the Marine Corps 3) Dismounted/Handheld Systems Bal Chatri, sponsored by Special Operations Command Dronebuster, no sponsor, commercial off-the-shelf capability Smart Shooter, no sponsor, commercial off-the-shelf capability 4) Command and Control Forward Area Air Defense Command and Control (FAAD-C2), sponsored by the Army (includes FAAD-C2 interoperable systems like the Air Force's Air Defense System Integrator (ADSI) and the Marine Corps' Multi-Environmental Domain Unmanned Systems Application Command and Control (MEDUSA C2)) https://www.c4isrnet.com/unmanned/2020/06/26/army-selects-eight-counter-drone-systems-for-the-joint-force/

• 

  April 1, 2020 | International, Aerospace

  Raytheon, Missile Defense Agency sign landmark $2 billion Standard Missile-3 contract

  Tucson, Ariz., March 30, 2020 /PRNewswire/ -- Raytheon Company (NYSE: RTN) will produce and deliver SM-3(®) Block IB interceptors under a $2.1 billion, multi-year U.S. Missile Defense Agency contract. It is the first multi-year contract for the SM-3 program, and covers fiscal years 2019-2023. SM-3 is the only ballistic missile interceptor that can be launched on land and at sea. It is deployed worldwide and has achieved more than 30 exoatmospheric intercepts against ballistic missile targets. "This procurement deal is a win-win for government and industry," said Dr. Mitch Stevison, Raytheon Strategic and Naval Systems vice president. "Efficiencies gained from this contract will allow us to reduce costs, continue to improve the SM-3 and deliver an important capability to our military." The Block IB variant achieved full-rate production in 2017. The company has delivered more than 400 SM-3 rounds over the lifetime of the program. About Raytheon Raytheon Company, with 2019 sales of $29 billion and 70,000 employees, is a technology and innovation leader specializing in defense, civil government and cybersecurity solutions. With a history of innovation spanning 98 years, Raytheon provides state-of-the-art electronics, mission systems integration, C5I(®) products and services, sensing, effects, and mission support for customers in more than 80 countries. Raytheon is headquartered in Waltham, Massachusetts. Follow us on Twitter. Media Contact Doug Shores +1.256.527.5196 rmspr@raytheon.com View original content to download multimedia:http://www.prnewswire.com/news-releases/raytheon-missile-defense-agency-sign-landmark-2-billion-standard-missile-3-contract-301031740.html SOURCE Raytheon Company