September 9, 2019 | Local, Aerospace
Leonardo and CAE USA have joined forces to collaborate in the United States to offer integrated solutions for helicopter training requirements for the government market. A memorandum of agreement (MoA) was signed recently between the companies that expands on the long-established relationship between Leonardo and CAE in helicopter training. The MoA is focused on delivering tailored helicopter-and-training packages to U.S. government operators and Foreign Military Sales (FMS) customers.
The companies will provide low risk and best value by offering a comprehensive and integrated training solution that includes aircraft, simulators and courseware. Working together to create a cohesive flight training package, Leonardo and CAE will be at the forefront of integrated, live, and virtual training developed for specific aircraft missions.
The integrated offerings from Leonardo and CAE could include advanced helicopters, simulators and training devices, courseware, training services, and training centers. Each arrangement will be specific to the customer and determined on a case-by-case basis.
William Hunt, CEO AgustaWestland Philadelphia Corporation, said: “Leonardo has a long history of collaborating with CAE for helicopter training. By creating integrated training systems for the U.S. government together, we are able to offer forward-looking, cost effective solutions that ensure mission success.”
“We look forward to collaborating with Leonardo on training opportunities in the U.S. military market related to Leonardo's range of helicopter platforms,” said Ray Duquette, president and general manager, CAE USA. “Our extensive experience in helicopter simulation and training and specifically on Leonardo helicopters means we will be able to offer timely, cost-effective and integrated training solutions to our U.S. customers.”
April 1, 2024 | Local, Land
Yesterday, approximately 70 Canadian Armed Forces members deployed to Jamaica. At the request of the Jamaican government, they will provide training to military personnel from Caribbean Community (CARICOM) nations who are set to deploy to Haiti as part of the United Nations-authorized, Kenyan-led, Multinational Security Support (MSS) mission.
May 31, 2019 | Local, C4ISR
Metrology-grade 3D laser scanner can now be used to inspect dents and blends on all models of Boeing commercial airplanes Creaform, the worldwide leader in portable 3D measurement solutions and non-destructive testing (NDT) solutions, announced today that its HandySCAN 3D™ metrology-grade 3D laser scanner can now be used for recording physical attributes of aircraft dents and blends on all models of Boeing commercial airplanes. Boeing has released a service letter with guidance on the use of 3D scanners for measuring dents and blends on airplanes. The SmartDENT 3D™ solution and the flagship HandySCAN 3D scanner were used in the process of guiding Boeing's quality requirements for the service letter. “Creaform is proud to see leaders such as Boeing, turn to 3D scanning solutions for surface defect inspection. With SmartDENT 3D, our goal is to provide the most accurate damage assessment to our customers, so they can make informed and safe decisions, while getting their aircraft back flying with minimal down time,” said Jérôme Beaumont, Global NDT Business Manager at Creaform. Overview of SmartDENT 3D benefits: Speed: 80 times faster than the pit gauge technique. It is the fastest and most reliable aircraft surface damage inspection tool available on the market. Metrology-grade measurements for aircraft maintenance: The scanner is accurate to 0.025 mm (0.0009 in.) and has a resolution of up to 0.100 mm (0.0039 in.) with high repeatability and traceable certificate. Intuitive pass/fail assessments: With its intuitive design and real-time software visualization, Creaform's NDT solutions ensure short learning curves and minimal operator experience influence on the accuracy of results. Live visualization and portability: Weighting less than a kilo, the handheld scanner is the perfect tool for work in hangars or directly outdoors. Users can easily perform 3D surface inspection of any part of an aircraft on which they would use manual techniques—including on and under wings. In addition to complying with Boeing's service letter, Creaform HandySCAN 3D scanners are listed in the Airbus Technical Equipment Manual, which is referenced in its Structure Repair Manual. Quality engineers and MRO operators looking to improve their turnaround times and profitability can contact Creaform to find out more about its NDT solutions. https://www.creaform3d.com/en/news/creaform-handyscan-3d-scanner-meets-boeings-requirements
May 14, 2018 | Local, Aerospace
Chris Thatcher In a two-by-three metre wind tunnel at the National Research Council of Canada's (NRC) aerospace research centre in Ottawa, aerospace engineers are gathering data for the Royal Canadian Air Force (RCAF) this week to validate the placement of the sniper pod on the centreline station of the CF-188 Hornet. “For this configuration, we are running at close to takeoff and landing speeds to simulate the take off and landing of the F-18, about 100 metres per second or almost 200 knots,” explained Melissa Richardson, an aerodynamics research officer and the project manager for the testing process, as wind whipped over the inverted nose landing gear and sniper pod. The CF-188 fighter jet has carried a certified sniper pod on the left side of the fuselage, below the engine intake, since the aircraft were upgraded in the early 2000. But lessons from recent operations over Libya in 2011 and Iraq and Syria between October 2014 and March 2016 convinced pilots they would have a better view of possible targets with the centerline placement. “We found a lot of our missions revolved around looking at the ground, monitoring areas of interest and targets for missions that are four to five hours long,” said Capt Tom Lawrence, a CF-188 pilot and the project officer for fighter weapons and equipment. “When [pilots] are manoeuvring their aircraft, there is a chance of the aircraft actually masking the targeting pod. Putting [it] on the centre of the aircraft allows a larger field of regard.” Rather than bank left to maintain focus on a target, the new placement should ensure an uninterrupted view of the ground or target aircraft, “taking that frustration out of the pilot's mind,” he said. “They can just focus on the imagery and the task at hand.” Lawrence said it could also make it easier for pilots to employ weapons and assess battle damage effects. The purpose of the wind tunnel tests is to measure the aerodynamics created by the nose landing gear on the sniper pod mounted behind it at times when it is most exposed to turbulence, said Richardson. Among concerns before the tests began were the effect of significant vibration on the pod and the possibility of debris being kicked up by the wheels and striking its protective glass shield. “[We need to] make sure the aircraft is safe to operate with the sniper pod on this new location. That means it can take off and land without excessive vibration, that the loads are still within acceptable limits,” explained Capt David Demel, the certification authority with the RCAF's Technical Airworthiness Authority. “This is the goal of the current wind tunnel test, to confirm that before we move to the flight test phase in Cold Lake in the September timeframe.” A second a high-speed equivalent test will be conducted by the NRC at its high speed trisonic wind tunnel in about three weeks, using a six per cent scale model, that will include ensuring engine intake airflow is not affected. Test pilots with the Operational Test and Evaluation Unit in Cold Lake will then recertify operational airworthiness of the sniper pod in its new placement. While the testing facilities are being provided by the NRC, the vibration data is being gathered and analyzed by Bombardier, which has provided some of the instrumentation. The sniper pod and landing gear were installed in the wind tunnel by L-3 MAS, which will have the task of mounting the pods in the new location on the entire CF-188 fleet–including the 18 F/A-18 Hornets the government is negotiating to buy from the Royal Australian Air Force–once approved. “We're all collaborating on the project as it goes through each phase, from technical airworthiness to operational airworthiness,” said Lawrence. https://www.skiesmag.com/news/rcaf-planning-new-sniper-pod-placement-cf-188-hornet/