INTERPOL Pushes for "Romance Baiting" to Replace "Pig Butchering" in Scam Discourse

On the same subject

• 

  September 16, 2019 | International, Aerospace

  The Next Big Thing: Lockheed Martin Makes Northern Alabama Flagship for Hypersonic Strike Work

  COURTLAND, Ala., Sept. 16, 2019 /PRNewswire/ -- Making Northern Alabama its central location for Hypersonic Strike Work, Lockheed Martin (NYSE: LMT) will establish a new facility for the assembly, integration and testing of hypersonics programs and locate the management and engineering workforce for many of these programs in Huntsville. The Courtland expansion will bring two new buildings in support of Lockheed Martin's portfolio of hypersonics programs. This decision brings 72 new jobs to Courtland and 200 new jobs to Huntsville over the next three years with additional job growth expected. During an official ceremony in Courtland today, Marillyn Hewson, Chairman, President and CEO for Lockheed Martin, with speakers Senator Richard Shelby, Governor Kay Ivey, Congressmen Robert Aderholt and Mo Brooks, and Rick Ambrose, Executive Vice President of Space for Lockheed Martin, spoke to the shared commitment it takes to expand operations in Northern Alabama and the collaborative effort between government and industry to provide this advanced capability to the warfighter. Rick Ambrose will host an event, later today in Huntsville, to celebrate the increased workforce expansion as part of this effort. Officials representing the Office of the Under Secretary of Defense, US Air Force, US Army and US Navy were in attendance to mark the occasion for the future site of the next hypersonic production facility. Lockheed Martin has a strong partnership with the state of Alabama that dates back several decades and includes research and development on rockets and space launch vehicles, tactical missiles, space exploration and air and missile defense targets. Lockheed Martin's Courtland and Huntsville employees are an established part of the community and weaved deeply into the fabric of the economy. The company employs over 2,000 people in the state of Alabama, who support local businesses, charitable organizations and volunteerism to multiple schools for STEM outreach and education. "The decision to bring hypersonic manufacturing to this region would not have been possible without the support of the State of Alabama, our local partners including Lawrence and Madison counties, the cities of Courtland and Huntsville and Tennessee Valley Authority as well as those elected representatives in Congress," said Scott Keller, vice president and general manager for Strategic and Missile Defense for Lockheed Martin. "On behalf of Lockheed Martin, we are honored to expand our presence in Northern Alabama and watch as the next cohort of innovators take advanced defense technology to levels we once thought were impossible." "Lockheed Martin has a longstanding relationship with the state of Alabama, and I am proud to see that strengthen even more as they make our state the flagship location for their hypersonic programs," said Governor Ivey. "Both Courtland and Huntsville will gain new jobs, which is always welcome news. I am proud and confident that Alabamians will help advance Lockheed Martin's goals as we begin working towards the advancements of the future." Lockheed Martin is proud to be an industry leader in the development, testing and fielding of hypersonic systems. Hypersonic Strike capabilities have been identified by the U.S. government as a critical capability that must be addressed in support of the U.S. National Security Strategy. Lockheed Martin is honored by the partnerships established with the U.S. Air Force, U.S. Army, U.S. Navy, and DARPA on key programs to meet this critical mission need. For additional information, visit our website: www.lockheedmartin.com/hypersonics https://news.lockheedmartin.com/2019-09-16-The-Next-Big-Thing-Lockheed-Martin-Makes-Northern-Alabama-Flagship-for-Hypersonic-Strike-Work

• 

  September 18, 2018 | International, C4ISR

  BAE Maturing microelectronics for next-generation radar, electronic warfare, and communications systems

  BAE Systems has signed a cooperative agreement with the Air Force Research Laboratory (AFRL) for Phase 1 of a technical effort to transition gallium nitride (GaN) semiconductor technology developed by the U.S. Air Force to our Advanced Microwave Products (AMP) Center. We've signed a cooperative agreement with the Air Force Research Laboratory (AFRL) for Phase 1 of a technical effort to transition gallium nitride (GaN) semiconductor technology developed by the U.S. Air Force to our Advanced Microwave Products (AMP) Center. As part of the effort, we'll transfer and further enhance the technology, and scale it to 6-inch wafers to slash per-chip costs and improve the accessibility of this defense-critical technology. GaN technology provides broad frequency bandwidth, high efficiency, and high transmit power in a small footprint, making it ideal for next-generation radar, electronic warfare, and communications systems. Under the agreement, we will work with AFRL to establish a 140-nanometer GaN monolithic microwave integrated circuit (MMIC) process that will be qualified for production by 2020, with products available to Department of Defense (DoD) suppliers through an open foundry service. “Millimeter-wave GaN technologies today are produced in research and development laboratories in low volumes at high associated costs or in captive foundries that are not broadly accessible to defense suppliers,” said Scott Sweetland, Advanced Microwave Products director at BAE Systems. “This effort will leverage AFRL's high-performance technology and BAE Systems' 6-inch manufacturing capability to advance the state of the art in GaN MMIC performance, reliability, and affordability while providing broader access to this critical technology.” The work on this project will primarily take place in our 70,000-square-foot Microelectronics Center (MEC) in Nashua, New Hampshire, where we research, develop, and produce compound semiconductor materials, devices, circuits, and modules for a wide range of microwave and millimeter-wave applications. The MEC has been an accredited DoD Category 1A Trusted Supplier since 2008, and fabricates integrated circuits in production quantities for critical DoD programs. As part of the project, the AMP Center team will work closely with the company's FAST LabsTM research organization and MMIC design experts from ENGIN-IC. https://www.baesystems.com/en/article/maturing-microelectronics-for-next-generation-radar-electronic-warfare-and-communications-systems

• 

  October 1, 2019 | International, Aerospace

  Air Force paints a digital future where data from satellites play central role

  by Sandra Erwin In a few months the Air Force will start a series of experiments to try to connect fighter aircraft and other weapon systems into a single network so they can all share critical data and intelligence, much of which is collected by satellites in space. Will Roper, the assistant secretary of the Air Force for acquisition, described the venture as the “first demonstration of what you could call ‘step 1' of ABMS.” ABMS is short for Advanced Battle Management System, and it is a hard concept to explain because it is not like a traditional piece of hardware or software. It can be best described as a network where data is piped in from sensors located in space, at sea, in the air or on the ground. That information would be instantly analyzed with artificial intelligence tools and shared across the network. This is the type of technology that will “allow us to be more collaborative,” Roper told reporters at the recent 2019 Air Space & Cyber symposium. Chief of Staff Gen. David Goldfein is “driving this idea across the Air Force,” said Roper. Goldfein has been a champion of ABMS and wants to make it a “large dollar item in our 2021 budget,” said Roper. The thinking is that the Air Force will spend less money on shiny new platforms and more on exploiting data and advanced networks. It would be like the “Internet of Things, but applied to military systems,” said Roper. Air Force leaders initially pitched the ABMS idea to Congress two years ago as a vision of the future where access to timely data is key to success in the battlefield. They suggested that the Air Force should invest in ABMS rather than spend billions on new command-and-control airplanes. Congress gave the plan a skeptical reception but the Air Force will continue to press its case. In a keynote speech at Air Force Association's Air Space & Cyber conference last week, Goldfein described the future as one of “multi-domain operations” where all weapons and military forces receive up-to-the-minute intelligence and are able to share that data, something that ABMS would make possible. “What I'm talking about is a fully networked force where Air Force paints a digital future where data from satellites play central role each platform's sensors and operators are connected,” said Goldfein. While the concept seems straightforward, putting it into practice is not. One of the challenges is how to handle the vast amounts of data available from satellites and the infrastructure required to bring this data to the ground, analyze the data and then transport it to where it's needed. Some of the crucial technologies that will enable ABMS or any similar efforts will come from the world of commercial space and cloud computing. The Air Force Space and Missile Systems Center has recognized this as it pursues a project called CASINO, short for Commercially Augmented Space Inter Networked Operations. CASINO is a spinoff of the Defense Advanced Research Projects Agency's Blackjack program that is attempting to demonstrate the military utility of small satellites in low Earth orbit. SMC has made CASINO one of its signature efforts to show how commercial technology could be used to process and distribute data from large LEO constellations. The Pentagon's Silicon Valley-based Defense Innovation Unit on Sept. 10 awarded a contract of undisclosed value to Ball Aerospace and Microsoft to demonstrate cloud processing capabilities in support of the CASINO project. The companies will have to show how simultaneous, worldwide data streams from large, distributed constellations of small satellites can be processed quickly using Microsoft's Azure cloud and Ball Aerospace algorithms. This is about making satellite data more actionable more quickly, Azure Global vice president Tom Keane said. One of the questions this project seeks to answer is “what would it take to completely transform what a ground station looks like, and downlink that data directly to the cloud?” Keane said. Perhaps one option is to place electronically steered flat panel antennas on the roof of a data center to connect multiple LEO satellites. Ball Aerospace algorithms in this project will process data streams from up to 20 satellites. With the data in the cloud, customers can direct it to where it's needed. Clearly, there is a long way to go to achieve what Goldfein calls the “Air Force That We Need” — one where all U.S. and allied forces are connected and get relevant information quickly. But you have to start somewhere. https://spacenews.com/air-force-paints-a-digital-future-where-data-from-satellites-play-central-role/