Elbit Systems subsidiary to supply shot-spotting sensors in Africa

On the same subject

• 

  May 12, 2024 | International, Land

  Italy mulls delivery of another SAMP/T system to Ukraine, says source

  The battery Italy would send is based in Kuwait and is one of five now operated by Italy, after one was sent to Ukraine last year.

• 

  October 16, 2018 | International, Naval, Land, C4ISR

  Contract Awards by US Department of Defense - October 15, 2018

  ARMY Absolute Business Solutions Inc., Herndon, Virginia (W911QY-19-D-0001); Data Systems Analysts Inc., Feasterville Trevose, Pennsylvania (W911QY-19-D-0002); DCS Corp., Alexandria, Virginia (W911QY-19-D-0003); HII Mission Driven Innovative Solutions Inc., Huntsville, Alabama (W911QY-19-D-0004); Integrity Consulting Engineering and Security Solutions,* Purcellville, Virginia (W911QY-19-D-0005); Interactive Process Technology LLC, Billerica, Massachusetts (W911QY-19-D-0006); Joint Research and Development Inc.,* Stafford, Virginia (W911QY-19-D-0007); Kalman and Company Inc., Virginia Beach, Virginia (W911QY-19-D-0008); MLT Systems LLC,* Stafford, Virginia (W911QY-19-D-0009); Mustang Gray LLC,* Stafford, Virginia (W911QY-19-D-0010); Patricio Enterprises Inc., Stafford, Virginia (W911QY-19-D-0011); and Whitney, Bradley & Brown Inc., Reston, Virginia (W911QY-19-D-0012), will share in a $249,000,000 firm-fixed-price contract for providing resources in support of the Joint Program Executive Office for Chemical and Biological Defense. Bids were solicited via the internet with 21 received. Work locations and funding will be determined with each order, with an estimated completion date of Oct. 14, 2023. U.S. Army Contracting Command, Aberdeen Proving Ground, Maryland, is the contracting activity. NAVY Dyncorp International LLC, Fort Worth, Texas, is awarded a $152,247,409 firm-fixed-price, cost reimbursable, indefinite-delivery/indefinite-quantity contract. This contract provides for logistics support services and material for the organizational and depot level maintenance of approximately 118 TH-57 aircraft. Work will be performed in Milton, Florida, and is expected to be completed in November 2022. No funds will be obligated at time of award. Funds will be obligated on individual task orders as they are issued. This contract was competitively procured via an electronic request for proposal, with two offers received. The Naval Air Warfare Center Training Systems Division, Orlando, Florida, is the contracting activity (N61340-19-D-0905). WR Systems Ltd., Norfolk, Virginia, is awarded a $49,999,996 indefinite-delivery/indefinite-quantity, performance-based contract with provisions for cost-plus-fixed-fee and firm-fixed-price task orders. The contract is for the procurement of positioning, navigation and timing engineering and in-service engineering agency support services. The services required include design development, systems integration, acquisition and prototype engineering, technical documentation, and integrated logistic support in order to support the Integrated Product Team. Work will be performed in Norfolk, Virginia, and is expected to be completed by October 2020. Fiscal 2018 other procurement (Navy) funds in the amount of $1,200 are obligated at the time of award and will not expire at the end of the current fiscal year. This contract was not competitively procured because this is a sole-source acquisition pursuant to the authority of 10 U.S. Code 2304(c)(1), one source or limited sources (Federal Acquisition Regulation 6.302-1(a)(2)(iii)(B)). Space and Naval Warfare Systems Center Atlantic, Charleston, South Carolina, is the contracting activity (N6523619D8001). The Boeing Co., St. Louis, Missouri, is awarded $24,400,000 for cost plus-incentive-fee delivery order N0001918F2046 against a previously issued basic ordering agreement (N00019-16-G-0001). This order provides for Airborne Electronic Attack (AEA) System enhancements to the ALQ-218 receiver system hardware and communication lines between assemblies to accommodate future planned functional growth and enhancements. Thirteen sets of WRA-7, WRA-8, WRA-9, and 18 AEA gun bay pallets will be modified and the associated technical directives will be written in support of the Navy and the government of Australia. Work will be performed in Baltimore, Maryland (31 percent); St. Louis, Missouri (23 percent); St. Augustine, Florida (15 percent); Bethpage, New York (11 percent); Patuxent River, Maryland (10 percent); and China Lake, California (10 percent), and is expected to be completed in December 2020. Fiscal 2018 aircraft procurement (Navy); and foreign military sales funds in the amount of $24,400,000 will be obligated at time of award, none of which will expire at the end of the current fiscal year. This delivery order combines purchases for the Navy ($23,157,457; 95 percent); and the government of Australia ($1,242,543; 5 percent). The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. Electric Boat Corp., Groton, Connecticut, is awarded a $14,718,840 cost-plus-fixed-fee contract for the Next Generation Submarine Science and Technology Research. This contract contains options, which if exercised, would increase the contract value to $39,661,906. Work will be performed in Groton, Connecticut, and work is expected to be completed by Oct. 14, 2019. If options are exercised, work will continue through October 2023. Fiscal 2018 research, development, test and evaluation (Navy) funds in the amount $10,000 will be obligated at the time of award. No funds will expire at the end of the current fiscal year. This contract was competitively procured under N00014-18-S-B001 “Long Range Broad Agency Announcement (BAA) for Navy and Marine Corps Science and Technology.” Proposals will be received throughout the year under the long range BAA, therefore, the number of proposals received in response to the solicitation is unknown. The Office of Naval Research, Arlington, Virginia, is the contracting activity (N00014-19-C-1002). DEFENSE INFORMATION SYSTEMS AGENCY Southwind Construction Services LLC, Edmond, Oklahoma, was awarded a competitive firm-fixed-price contract for the installation of raised floor and high density cooling and power upgrade at the Oklahoma City, Oklahoma data center. The face value of this action is $9,177,535 funded by fiscal 2018 and 2019 capital funds. Performance will be at Data Center Oklahoma City, Tinker Air Force Base, Oklahoma. Proposals were solicited via the Federal Business Opportunity website and three proposals were received. The period of performance is 365 days after contract award (estimated period of performance is Oct. 22, 2018 - Oct. 21, 2019). The Defense Information Technology Contracting Organization, Scott AFB, Illinois, is the contracting activity (HC102819C0001). *Small Business https://dod.defense.gov/News/Contracts/Contract-View/Article/1662895/source/GovDelivery/

• 

  October 2, 2018 | International, Land

  Army Looks to Nature to Improve Body Armor

  By ARL Public Affairs Future soldiers will be better protected in combat by stronger and lighter body armor thanks to innovative work at the U.S. Army Research Laboratory. Materials science engineers are using nature as the inspiration for breakthroughs in additive manufacturing. “My project is to design a system that can 3-D print armor ceramics that will allow production of parts with graded structures similar to an abalone structure in nature that will improve the ceramic armor's toughness and survivability with lower weight,” said Joshua Pelz, a materials science and engineering doctoral candidate at the University of California San Diego. He spent this summer working with Army scientists at ARL's Rodman Materials Science Laboratory at APG to design and build a unique 3-D printer. Two syringes containing distinct, viscous ceramic slurries are connected to a custom-made auger and print head. Pelz took advantage of his computer programming skills to hack into the 3-D printer, tricking it into using its own fan controls to manipulate the ratio of materials being printed. He designed a custom auger and print head and even used the same 3-D printer to create those parts. “Josh found a way to implement our ideas into that machine, take apart machine, take out the polymer FDM heads that are built into it, start to look at how to design the machine to incorporate our ceramic slurries and print those slurries into the head but then he had to do a lot of really basic work looking at how to actually hack the machine,” said Dr. Lionel Vargas-Gonzalez, Ceramics Synthesis and Processing team lead at the laboratory. “We've got people like Josh who were very gifted and talented and can bring all that kind of capability and use a lot to our advantage it's a huge benefit for us.” Current processing techniques used to create ceramic armor are limited by how engineers can combine materials into a stronger composite material. “For ceramics, that's a bit of a challenge because with you can't really do what a one-step additive manufacturing process like you could if a metal or a polymer,” Vargas-Gonzalez said. “We see this as a next avenue for armor because we're going to be able to, in theory, design armor in a way that we can attach multiple materials together into a single armor plate, and be able to provide ways for the armor to perform better than it can be just based on one material alone.” Full article: http://science.dodlive.mil/2018/10/01/army-looks-to-nature-to-improve-body-armor/