Back to news

December 5, 2024 | Local, Land

DND confirms malfunction of new anti-tank missiles heading to Latvia

There were problems with five out of eight of the new Canadian Forces Spike missiles.

https://ottawacitizen.com/news/national/defence-watch/dnd-canadian-forces-anti-tank-missiles-latvia

On the same subject

  • Three ministers to work on options for creation of the new Defence Procurement Canada

    December 20, 2019 | Local, Aerospace, Naval, Land, C4ISR, Security

    Three ministers to work on options for creation of the new Defence Procurement Canada

    DAVID PUGLIESE, OTTAWA CITIZEN Procurement minister Anita Anand has been told by Prime Minister Justin Trudeau that she will lead the push to create a new defence procurement organization. That will be done with the support of Harjit Sajjan, the Minister of National Defence and Bernadette Jordan, the Minister of Fisheries, Oceans and the Canadian Coast Guard. They will work together “in bringing forward analyses and options for the creation of Defence Procurement Canada, to ensure that Canada's biggest and most complex National Defence and Canadian Coast Guard procurement projects are delivered on time and with greater transparency to Parliament,” according to the mandate letter issued by Trudeau to Anand. “This priority is to be developed concurrently with ongoing procurement projects and existing timelines.” No timelines were provided for when the options for the new organization are needed. In addition, there are no details on when Defence Procurement Canada would be expected to be up and running. The organization is being created to deal with ongoing problems Canada faces in purchasing equipment for the Canadian Forces and the Canadian Coast Guard. https://ottawacitizen.com/news/national/defence-watch/three-ministers-to-work-on-options-for-creation-of-the-new-defence-procurement-canada

  • Military eyes adaptive camouflage, self-repairing clothing for future troops

    January 29, 2021 | Local, Land

    Military eyes adaptive camouflage, self-repairing clothing for future troops

    5 Canadian universities leading cutting-edge research at cost of $9M over 3 years David Burke From chameleon-inspired camouflage to clothing that mends itself when damaged, the Department of National Defence is looking to outfit Canadian troops with next-wave gear that provides better protection — and less detection — on the battlefield. Those are just two technologies in a long list of cutting-edge scientific advancements that DND is spending $9 million over three years to research, spearheaded by five Canadian universities. "Adaptive camouflage would be more like a chameleon where, depending on your background, your camouflage will modify itself. So if you are in front of a dark wall, your camouflage could be darker. If you are in front of a whiter wall, your camouflage would be lighter," said Eric Fournier, director general of innovation with DND. That technology exists and is being worked on right now, he said. Fournier and the researchers working for DND are tight-lipped on details about how effective this kind of technology is and exactly how it works. DND did not supply CBC with any images of the proposed designs. "I'm not sure we're allowed to talk about it all that much yet," said Shona McLaughlin, defence scientist portfolio manager with the federal Innovation for Defence Excellence and Security program. Carleton University, Polytechnique Montreal, the University of Manitoba, the University of British Columbia and Université de Sherbrooke are leading the work. They have all received around $1.5 million so far, except for Polytechnique, which is working on two projects and has been given almost $3 million. Researching advanced materials A handful of businesses are also helping with the research, including athletic apparel manufacturer Lululemon Athletica and engineering and manufacturing firm Precision ADM. Each university is researching what's known as advanced materials, which are engineered to perform a variety of specific functions. Some of those materials can be fashioned into clothing that repairs itself. As an example, McLaughlin said a capsule could be embedded in a shirt or armoured vest that, when the garment or gear is damaged, bursts and releases a liquid or foam that solidifies and seals the hole. Research is also being done on new materials that may one day replace Kevlar and ceramics as the chief components of body armour. "Now we're looking at materials where we can actually tune the properties, we can make them lighter weight, stronger and less bulky," said McLaughlin. The goal is to have armour that holds up better to bullets, high-velocity ballistics and shrapnel, and is more comfortable for the wearer. Reducing weight of soldiers' equipment It's innovation that would be extremely helpful to troops on the battlefield, said Randy Turner, a retired special forces soldier with years of experience in combat zones. Turner was part of the Canadian Armed Forces Joint Task Force 2 (JTF2), a highly trained unit that handles complex and risky missions throughout the world. He had tours of duty in Afghanistan and Bosnia. On average, Turner said soldiers carry around 60 to 65 pounds of equipment when they're on duty. "A soldier spends a lot of time on his feet and he's moving in and around vehicles. Anything that could be a little bit smaller, a little bit lighter, would also be a little less taxing on the individual's body," said Turner. The adaptive camouflage and self-repairing clothing are also of interest to Turner. He said anything that helps a soldier blend in is useful. Rips and tears in uniforms and damage to boots are also common, so clothing that repairs itself would be helpful. Still, he's apprehensive about the technology and questions whether wearable tech could distract military personnel from their job. "Has anyone asked, you know, what a soldier needs? Has anyone done a real hard needs assessment on what an infantry unit, for example, requires right now? I'm willing to bet the first thing that comes to mind is not going to be a uniform," said Turner. Other areas of protection He said the $9 million being spent on the research could be used for other things. "That's a lot of money that could be, in my opinion, better utilized to give an infantry unit some bullets so they can train and become proficient with their firearms," he said. "Give some quality training to soldiers, and that is a level of protection." At the universities, research continues with teams experimenting with fabrics that can block radio signals and printable electronics that can be woven into clothing. Printable electronics could perform a number of functions, according to McLaughlin, but she said monitoring a military member's health is high on the list. "It could be for health monitoring, if you want to make sure your soldiers are not overly stressed because they're in a hot environment ... the heat, the blood pressure, the actual stress from the exertion, those things you might want to keep tabs on," she said. Fournier has no doubt these new systems could help save lives. "Our soldiers go all over the world for all kinds of missions," he said. "Just to inform them, for example, [that] they're getting dehydrated ... It could have an impact on how missions would happen, for sure." 'Processing challenges' Teams have been working on this research for a little over a year and while progress is being made, no one has come forward with a finished project. Fournier said work like this can take years and there's no guarantee of a final product. He said the important thing is that researchers are moving the science of advanced materials forward. "In the end, we may not end up with a new protecting gear, but we will have learned a lot about making that protective gear in the future," said Fournier. McLaughlin also said people should temper their expectations. "It's not as simple as throwing everything in a pot, stirring it, and boom — you've got a material," she said. "There's processing challenges that [researchers] have to overcome. So that's one of the big things that they're working on right now ... how to actually create these things and how to evaluate them." https://www.cbc.ca/news/canada/nova-scotia/military-research-technology-combat-protection-1.5889528

  • QinetiQ Target Systems and Canadian UAVs Sign MOU for Commercial and Military UAV Services in Canada

    November 5, 2018 | Local, Aerospace

    QinetiQ Target Systems and Canadian UAVs Sign MOU for Commercial and Military UAV Services in Canada

    CALGARY, Nov. 5, 2018 /CNW/ - QinetiQ Target Systems, the largest UAV manufacturer in Canada, and Canadian UAVs (CUAVs), Canada's leading unmanned aviation solutions provider for enterprise and military applications, is proud to announce that they have signed a Memorandum of Understanding (MoU), outlining how the two companies will work together to bring combined 'best of breed' solutions for military and commercial markets. The agreement focuses on providing services to clients requiring long range, endurance and payload capacity primarily with the Skeldar V200, Mosquito UHV-T Group 2 UAV and the class 1 UAV Snyper. With manufacturing and operations facilities in Medicine Hat and Calgary as well as satellite locations across the country including at major naval bases on both coasts, the partnership is perfectly placed to provide direct services for both the commercial, civil and military markets in Canada. "We are thrilled to partner with CUAVs. CUAVs provide outstanding UAV services and expertise, and we are confident that this partnership will meet and exceed the requirements of our existing and new UAV clients in Canada. We are also actively pursuing export opportunities to further leverage our joint capabilities", commented Vincent Malley, Director of Business Development at QinetiQ Target Systems. "Canadian UAVs is delighted to be working closely with QinetiQ Target Systems. They have been a UAV provider to the military for over three decades and we believe our current and future clients will benefit greatly from our comprehensive combined capacity and expertise. We are very excited for the future of unmanned aviation in Canadaand we believe this joint offering will have significant positive implications for the further advance of this industry." said Sean Greenwood, President, and CEO of Canadian UAVs". Notes for Editors: About QinetiQ Listed on the London Stock Exchange (LSE: QQ.L), QinetiQ is a leading science and engineering company operating primarily in the defence, security and aerospace markets. Our customers are predominantly government organisations including defence departments, as well as international customers in other targeted sectors. Visit our website www.QinetiQ.com Follow us on LinkedIn and Twitter @QinetiQ Consult our privacy policy About Canadian UAVs Canadian UAVs is a Calgary-based solutions provider focused on safety-first data acquisition for unmanned aerial vehicle applications. CUAVs provides a range of custom and innovative UAV solutions for industrial environments where advanced imaging is necessary for surveying on an iterative or fixed point basis. Using advanced technology to monitor and acquire data about industrial assets, the company provides a viable advantage for clients and enterprises seeking to mitigate risk. SOURCE Canadian UAVS For further information: Please contact, QinetiQ Press Office on Tel: +44 (0) 1252 39 3500 or email: PressOffice@QinetiQ.com; Contact: Sean Greenwood (403) 796-5102 or visit our website: http://CanadianUAVs.ca https://www.newswire.ca/news-releases/qinetiq-target-systems-and-canadian-uavs-sign-memorandum-of-understanding-for-commercial-and-military-uav-services-in-canada-699634171.html

All news