Filtrer les résultats :

Tous les secteurs

Toutes les catégories

    3586 nouvelles

    Vous pouvez affiner les résultats en utilisant les filtres ci-dessus.

  • Defense Contractors Keep Most Plants Running Despite Outbreak

    14 avril 2020 | International, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

    Defense Contractors Keep Most Plants Running Despite Outbreak

    By Anthony Capaccio As of Wednesday, 86 sites were closed out of 10,509 locations Boeing's aircraft plant closings are one big exception The Pentagon's contractors have largely avoided widespread closings or “major impacts” so far from the coronavirus pandemic, according to a running tally compiled by its contracts management office. Of 10,509 locations tracked or monitored by the Defense Contract Management Agency, 135 had closed at some point as of Wednesday. Forty-nine of those reopened after an average of about 10 days. “These closures have generally been short-term in order to clean facilities” or to “reduce the potential exposure of employees,” agency spokesman Matthew Montgomery said in a statement. The agency doesn't track how many workers are affected, he said. And the numbers on closings don't reflect defense contractors that have cut back their operations -- or the outsized impact of Boeing Co.'s shutdowns. Boeing, the No. 2 U.S. defense contractor, has indefinitely halted assembly of the KC-46 refueling tanker and the P-8A Poseidon maritime patrol aircraft at its facilities in Washington State, the initial U.S. center of the pandemic. Last Friday, the company began a two-week shutdown of the Philadelphia-area factory where it manufactures military rotorcraft, including the Chinook CH-47 cargo helicopter and the tilt-rotor V-22 Osprey. Huntington Is Open By contrast, Huntington Ingalls Industries Inc., has had no closings to this point, according to spokeswoman Beci Brenton. With 42,000 employees, it's the sole U.S. builder of aircraft carriers and the co-contractor of Navy attack submarines and DDG-51 destroyers. Montgomery said the Defense Department “has worked closely with local and state governments to ensure that the defense industrial base is considered critical infrastructure to help minimize the impact of statewide closures.” Impacts from closings “are being seen across all sectors including but not limited to clothing and textiles, aerospace, shipbuilding, and ground vehicles,” he said. Many Pentagon contractors “are struggling to maintain a mission-ready workforce due to work site closures, personnel quarantines and state and local restrictions on movement” that can't “be resolved through remote work,” Kim Herrington, the Defense Department's pricing and contracting director, said in a memo Wednesday. To support the defense industry, the DCMA has modified about 1,400 contracts to increase the rate for “progress payments” for work completed on time from 80% to 90% of costs incurred for large businesses and from 90% of cost to 95% for small businesses. The move resulted in $3 billion being advanced to industry, according to Herrington. That's in addition to $882 million that the Air Force is providing to Chicago-based Boeing. The funds were being withheld until the company corrected or provided sufficient plans to correct numerous deficiencies with KC-46 tankers. Most of those flaws remain unresolved. Also, the Pentagon issued guidance Thursday that lets military contracting officers reimburse companies for documented payments to employees who can't work because of coronavirus facility closings or related restrictions. https://www.bloomberg.com/news/articles/2020-04-10/defense-contractors-keep-most-plants-running-despite-outbreak

  • Appel à projets de solutions innovantes pour lutter contre le COVID-19

    14 avril 2020 | International, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

    Appel à projets de solutions innovantes pour lutter contre le COVID-19

    Mise à jour : 14/04/2020 - Direction : AID Cet appel à projets du ministère des Armées, lancé par l'Agence de l'Innovation de Défense (AID), dans le cadre du plan gouvernemental de lutte contre le COVID-19, vise à disposer de propositions pour lutter contre la pandémie de COVID-19. Il porte sur la recherche de solutions innovantes, qu'elles soient d'ordre technologique, organisationnel, managérial ou d'adaptation de processus industriels, qui pourraient être directement mobilisables afin de : protéger la population, soutenir la prise en charge des malades, tester la population, surveiller l'évolution de la maladie au niveau individuel et l'évolution de la pandémie, ou aider à limiter les contraintes pendant la période de crise. Important : les projets devront être d'une maturité technologique suffisante pour être employables pendant l'actuelle pandémie. Ces solutions innovantes devront être facilement et rapidement reproductibles et s'appliquer à l'échelle de l'ensemble du territoire national dans l'enveloppe budgétaire définie. Un budget de 10 000 000€ TTC est prévu pour cet appel à projets, qui vise à financer un à plusieurs projets d'intérêt. Pour permettre le soutien d'un maximum de projets prometteurs, sauf exceptions dûment justifiées, les projets retenus par cet appel à projets ne seront pas cumulables avec les financements flash mis en place par l'UE ou l'ANR : Appel à projets de l'Agence nationale pour la recherche (ANR) : https://anr.fr/fr/detail/call/appel-a-projets-flash-covid-19/ Appel à projets de la Commission européenne : https://ec.europa.eu/info/news/startups-and-smes-innovative-solutions-welcome-2020-mar-13_en Les propositions de réponse sont attendues et évaluées au fil de l'eau jusqu'au 12 avril 2020. Les propositions déposées tardivement, jusqu'au 12 avril inclus, pourront être étudiées mais leurs chances d'être retenues seront fortement réduites. Ce que nous recherchons Nous avons identifié un certain nombre de domaines et de situations concrètes pour lesquels nous pressentons des améliorations possibles : Protections individuelles ou collectives, soignants et populations (e.g. masques, « hygiaphones de fortune », concepts innovants de protection, de barrières, techniques de recyclage, Do It Yourself, etc.) ; Gestion de la distance de sécurité entre individus ; Automatisation de t'ches pour le prélèvement, le nettoyage du matériel ou des salles ; Facilitation du déploiement d'hôpitaux de campagne en soutien aux populations ; Gestion de crise, aiguillage, structuration/modularité des chaînes de prise en charge (e.g. gestion logistique, RH, etc.) ; Production de nouvelles solutions de décontamination pour tout type de surface, pour petits et grands matériels, pour les espaces de vie, etc. ; Capacité de production en masse de solutions de décontamination ; Soutien à la prise en charge médicale (production du matériel ou traitement manquant, concept de recyclage, de détournement ou autre idée permettant de pallier ces manques) ; Détection du virus dans l'environnement ; Diagnostic et autodiagnostic rapide et conduite à tenir associée - dépistage massif - dépistage participatif ; Gestion de l'impact psychologique individuel et sociétal (communication et sensibilisation sur la crise et l'épidémie, amélioration de la perception du risque d'épidémie, gestion de l'après crise, etc.) ; Facteurs de limitation des déplacements et lutte contre la transgression ; Amélioration du travail à distance (outils de continuité numérique, sécurisation, etc.) ; Amélioration de la vie en isolement à domicile (numériques mais aussi hors solutions numériques) ; Autres thèmes dûment argumentés. NOTE IMPORTANTE aux producteurs de masques de protection : Dans le contexte de la crise sanitaire du COVID-19, les autorités gouvernementales ont sollicité l'appui de la direction générale de l'armement (DGA) du ministère des armées afin d'aider à identifier et caractériser des solutions permettant d'accroître la disponibilité de masques de protection face au virus. Nous travaillons en étroite collaboration avec la direction générale des entreprises (DGE) du Ministère de l'économie et des finances. Devant le succès de cette initiative, deux adresses m.él dédiées ont été créées et nous demandons aux entreprises d'adresser toute correspondance à ces deux adresses pour en accélérer le traitement. Adresse mél DGA : dga.Masques-Contact.fct(a)intradef.gouv.fr Adresse mél DGE : masques.dge(a)finances.gouv.fr Une fois l'accord préalable de la DGE obtenu pour la mise en test d'un prototype, les échantillons sont à envoyer à : DGA Maîtrise NRBC 5 rue Lavoisier 91710 VERT-LE-PETIT Nous ne sommes pas seulement intéressés par des technologies nouvelles ; le caractère innovant des propositions pourra consister à réorienter des technologies ou des processus industriels existants (par exemple détourner une usine de production de parfum pour en faire du gel hydroalcoolique). Nous acceptons les propositions provenant de tous types d'opérateurs : académiques, petites, moyennes entreprises, entreprises de taille intermédiaire, grands groupes. Des groupements constitués de ces différents types d'opérateurs seront possibles. En fonction du vecteur de financement ou d'acquisition utilisé, des restrictions sur l'origine ou la taille des opérateurs économiques pourront être appliquées. Les propositions internes des personnels civils et militaires du ministère des Armées sont également les bienvenues. Ce dont nous ne voulons pas Votre proposition ne doit pas proposer une innovation en cours de maturation qui n'a aucune chance d'être employée pour lutter contre l'actuelle pandémie. Contenu de la proposition Compte tenu de l'urgence du projet, la présentation et les justificatifs devront être les plus concis et précis possibles. La proposition doit contenir les documents suivants : le descriptif technique de la solution proposée et le cas d'usage (utilisateur, situation d'emploi) auquel cette solution répond. le plan projet comprenant : Un planning des développements et de la mise en service identifiant les jalons et les livrables permettant de suivre l'avancement du projet ; Une décomposition du prix de la proposition, en distinguant le cas échéant la part financée par le ministère des Armées et d'autres sources de financement. Le déposant pourra utilement proposer des éléments optionnels dans sa proposition. Un document de justification explicitant l'apport du projet pour chacun des 3 critères d'évaluation infra (impact, crédibilité, calendrier). Le dossier total ne dépassera pas 30 pages. Sélection des projets d'intérêt Critères obligatoires Les propositions seront analysées au regard des critères obligatoires ci-dessous : La solution proposée s'inscrit dans le périmètre de l'appel à projets (cf. « Ce que nous recherchons » et « Ce dont nous ne voulons pas ») ; La proposition contient un plan projet ; La proposition justifie l'intérêt du projet pour chacun des trois critères d'évaluation présentés infra. Seules les propositions remplissant l'ensemble des critères obligatoires seront analysées au fil de l'eau lors de la sélection des projets. Critères d'évaluation Un comité d'évaluation impliquant différents experts du ministère des Armées évaluera les propositions au fur et à mesure de leur réception. Les évaluateurs, pourront, s'ils le jugent nécessaire, entrer en contact avec les déposants afin de leur demander des clarifications sur leur proposition. Les évaluateurs ne pourront utiliser les informations contenues dans les propositions qu'aux seules fins de l'évaluation. Cette évaluation sera fondée sur les 3 critères suivants : Impact : les bénéfices anticipés (pour la population, les cycles de décision, les personnels de santé...) ; Crédibilité : tout élément de preuve, scientifique ou technique, permettant de confirmer la faisabilité du projet ; Calendrier : délai de mise en œuvre de la solution. Le choix de financer une proposition est fondé sur les résultats d'évaluation, sur le coût de chaque proposition vis-à-vis du budget disponible et sur des considérations d'ordre stratégique pour la personne publique. Les déposants dont la proposition n'aura pas été retenue pourront demander un avis synthétique sur leur proposition. Modalités pratiques Budget et contractualisation L'AID prévoit un budget total de 10 000 000 € TTC, visant à financer entre un et plusieurs projets. Date limite de remise des propositions Les propositions de réponse sont attendues et évaluées au fil de l'eau jusqu'au 12 avril 2020. Les propositions déposées tardivement, jusqu'au 12 avril inclus, pourront être étudiées mais leurs chances d'être retenues seront fortement réduites. Les propositions émises par les opérateurs économiques (personnes morales ou personnes physiques) doivent être déposées à l'adresse suivante : https://www.demarches-simplifiees.fr/commencer/appel-a-projets-aid-covid-19 Les propositions émises par les personnels civils et militaires du ministère des Armées (personnes physiques) doivent être déposées à l'adresse suivante : https://www.demarches-simplifiees.fr/commencer/appel-a-projets-aid-covid-19-innovateurs-minarm Un accusé sera transmis dès réception de la proposition. Important : en remettant son dossier, le déposant accepte sans réserve les conditions de l'appel à projets. Questions Vous pouvez poser toute question relative à l'appel à projets via l'adresse suivante : agenceinnovation.dir.fct(a)intradef.gouv.fr Protection des données à caractère personnel Les données à caractère personnel portées en réponse aux formulaires de dépôt de projet font l'objet d'un traitement mis en œuvre par le directeur de l'Agence de l'Innovation de Défense. Nous traitons vos données dans le but unique de permettre l'évaluation des projets et leur concrétisation éventuelles suite à l'évaluation. Les données seront conservées pendant une période de 6 mois après la date de clôture de l'appel à projet. Pendant cette période, nous mettons en place tous moyens aptes à assurer la confidentialité et la sécurité de vos données à caractère personnel, de manière à empêcher leur endommagement, effacement ou accès par des tiers non autorisés. Conformément à la loi « Informatique et Libertés » du 6 janvier 1978 modifiée et au Règlement Général sur la protection des données (RGPD) en vigueur depuis le 25 mai 2018. Vous bénéficiez d'un droit d'accès et de rectification sur vos données que vous pouvez exercer en contactant l'Agence de l'Innovation de Défense à l'adresse suivante : agenceinnovation.dir.fct(a)intradef.gouv.fr Mise à disposition des moyens du GENCI Les chercheurs académiques et industriels travaillant sur le sujet peuvent avoir accès immédiatement aux moyens de calcul et de stockage de la TGIR GENCI. Créée en 2007 par le MESRI, le CNRS, le CEA, la CPU et Inria, GENCI met à disposition des chercheurs français des moyens de calcul (supercalculateurs) et de stockage, souverains, opérés en France au TGCC (CEA), IDRIS (CNRS) et CINES (Universités) afin d'accélérer les travaux de recherche en modélisation/simulation, traitement de données massives et usage de l'intelligence artificielle (GENCI est une des composantes du plan français AIForHumanity avec la machine Jean Zay qui dispose notamment de 1300 GPU et 35 Po de stockage haut débit).Ces moyens et les services de support des centres sont accessibles gratuitement par le biais d'une procédure accélérée, pour plus d'information sur les moyens mis à disposition par GENCI vous pouvez vous référer ici : http://www.genci.fr/fr/node/1036 ; ou contacter directement Stéphane Requena, Directeur Technique & Innovation : stephane.requena(a)genci.fr Droits : AID

  • Vimy Award Call for Nominations

    14 avril 2020 | Local, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

    Vimy Award Call for Nominations

    Do you know someone who deserves to be celebrated? VIMY AWARD CALL FOR NOMINATIONS DO YOU KNOW SOMEONE WHO DESERVES TO BE CELEBRATED? Nominations Now Open for the annual Vimy Award presented at the 30th edition of the Vimy Gala. Established in 1991, the Vimy Award recognizes a Canadian who has made a significant and outstanding contribution to the defence and security of our nation and the preservation of our democratic values. It is normally presented as a lifetime achievement award. Past Recipients Her Excellency Adrienne Clarkson The Right Honourable Joe Clark The Honourable Bill Graham MGen Romeo Dallaire 2020 Distinguished Selection Committee Members Chief Justice of the Supreme Court Richard Wagner Chief of Defence Staff LGen Jonathan Vance Deputy Minister Jody Thomas The award honours the bravery and sacrifice of the Canadian soldiers – comprising the four divisions of the Canadian Corps – who were victorious in the battle of Vimy Ridge in April 1917.  The selection committee includes the Chief Justice of the Supreme Court of Canada and the Chief of Defence Staff of the Canadian Armed Forces, as well as industry and academic partners of the CDA Institute and members of the Board of Directors. Do you know someone who; Has made a sustained national or international contribution to Canada's National Security, Defence and/or the Canadian Military during his/her professional career. Serves as an inspiration at a national level within the Security, Defence and Military Community, through their leadership, practices, and accomplishments. Has garnered national and/or international recognition for his/her contributions to Canadian National Security, Defence and/or the Canadian Armed Forces. Is a leader whose achievements will be a source of historic and patriotic pride for generations to come. Nominations Deadline: July 1,2020 VISIT VIMY AWARD PAGE FOR FULL DETAILS VIMY GALA The Vimy Award will be presented at the prestigious Vimy Gala held on November 6, 2020 at the Canadian War Museum, Ottawa, Ontario. The Vimy Gala is a black-tie cocktail and dinner held annually since 1991 in Ottawa to honour Canada's fallen heroes in the context of the Remembrance Day activities held across the country. The Gala brings together active and retired members of the Canadian Armed Forces alongside future officers currently enrolled at the Royal Military Colleges, as well as industry and government leaders and international guests of honour. It will be an evening to remember and to reflect upon the sacrifices many have made for our nation and for the sake of building a more just and prosperous world. It is also a celebration of Canada and men and women who serve. The Gala is also an opportunity for defence professionals to recognize outstanding individuals in our community, whose courage, vision, and achievements inspire us all. To that end, we present the Vimy Award to a Canadian who has made an outstanding, lifelong contribution to our national security and defence and to preserving our democratic values. Past recipients include Her Excellency Adrianne Clarkson, the Honourable BIll Graham, General Rick Hillier, and the Right Honourable Joe Clark,LGen Christine Whitecross and most recently, Richard B. Fadden, O.C. 2019 Richard B. Fadden, O.C Vimy Award Acceptance Speech: 2020 and Beyond: Where Does Canada Fit? ATTEND and/or SPONSOR THE VIMY GALA 15% early bird discounts available The 30th Anniversary Vimy Gala will take place on: November 6, 2020 At the Canadian War Museum, Ottawa, Ontario, Canada. Contact Jennifer Giguere to find out about booking your Vimy Gala table and/or sponsorship at our 15% early bird special (ends July 1st). Please note that individual seating registration will only open in the fall. Gold Sponsors and above will be invited to a "Chairman's Circle" VIP Cocktail with members of the selction committee and the 2020 award laureate. jennifer@cdainstitute.ca CDA INSTITUTE PARTNERS PREMIER PARTNER STRATEGIC PARTNERS OPERATIONAL PARTNER Conference of Defence Associations Institute | 75 Albert Street, Suite 900, Ottawa, Ontario K1P 5E7 Canada

  • DARPA SBIR/STTR Opportunities

    14 avril 2020 | International, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

    DARPA SBIR/STTR Opportunities

    On April 8, 2020, the DARPA Small Business Programs Office (SBPO) pre-released the following SBIR/STTR Opportunities (SBOs): "Seabed Simulation Synthesis", Announcement Number HR001120S0019-04, published at https://beta.sam.gov/search?keywords=HR001120S0019-04 "Wearable Laser Detection and Alert System", Announcement Number HR001120S0019-05, published at https://beta.sam.gov/search?keywords=HR001120S0019-05 "Open Source Wide Band Software Defined Acoustic Modem", Announcement Number HR001120S0019-06, published at https://beta.sam.gov/search?keywords=HR001120S0019-06 These SBOs will open for proposals on April 23, 2020 and close on May 26, 2020. If you have any questions on the open BAAs or DSIP, please contact the DSIP Help Desk Monday – Friday, 9:00 a.m. – 5:00 p.m. ET at 703-214-1333 or DoDSBIRSupport@reisystems.com. Thank you for your interest in the DoD SBIR/STTR Program. DoD SBIR/STTR Support Team

  • FUNDING for Innovators who can help fight COVID-19 / Financement pour les innovateurs pouvant contribuer à la lutte contre COVID-19

    14 avril 2020 | Local, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

    FUNDING for Innovators who can help fight COVID-19 / Financement pour les innovateurs pouvant contribuer à la lutte contre COVID-19

    Today we launched our Testing Stream (formerly the Build in Canada Innovation Program) Call for Proposals aimed at Canadian innovators who have a prototype that can help Canada combat COVID-19 or similar future outbreaks. This call for proposals is a special edition of our Testing Stream and will be open for a limited time to support the Government of Canada's collective efforts in combating COVID-19. We are calling on innovators across the country who have an innovative solution ready to be tested by the federal government and its provincial, territorial and municipal partners to submit a proposal. You could land a sale of up to $550K, and if your innovation is deemed to be a game changer in the fight against COVID-19, under exceptional circumstances we may provide additional funding to test your innovation. This funding opportunity is open for a LIMITED time only – Apply before April 21, 2020. We are also planning the launch of a Testing Stream open Call for Proposals for any type of innovative prototype in Spring-Summer 2020. You may also be interested in three COVID-19 R&D funding challenges we recently launched: Made in Canada filtration material for the manufacture of N95 respirators and surgical masks Point of Care and Home Diagnostic Kit for COVID-19 Low-cost sensor system for COVID-19 patient monitoring APPLY ONLINE Aujourd'hui, nous avons lancé notre appel à propositions pour le volet de mise à l'essai (anciennement le Programme d'innovation construire au Canada - PICC) destiné aux innovateurs canadiens qui disposent d'un prototype pouvant aider le Canada à lutter contre COVID-19 ou d'autres épidémies futures similaires. Cet appel à propositions est une édition spéciale de notre volet de mise à l'essai, et sera ouvert pour une durée limitée, afin de soutenir les efforts collectifs du gouvernement du Canada dans la lutte contre COVID-19. Nous invitons les innovateurs de tout le pays qui disposent d'une solution innovante prête à être testée par le gouvernement fédéral et ses partenaires provinciaux, territoriaux et municipaux à soumettre une proposition. Vous pourriez décrocher une vente allant jusqu'à 550 000 $, et si votre innovation est considérée comme un facteur de changement important dans la lutte contre COVID-19, nous pouvons dans des circonstances exceptionnelles, vous fournir un financement supplémentaire pour tester votre innovation. Cette opportunité de financement est ouverte pour une durée LIMITÉE seulement - Posez votre candidature avant le 21 avril 2020. Nous prévoyons également le lancement d'un appel à propositions ouvert pour tout type de prototype innovant, au printemps-été 2020. Vous pourriez également être intéressé par trois opportunités de financement sous forme de défis visant la R&D que nous avons récemment lancée : Matériau de filtration fait au Canada pour la fabrication de respirateurs N95 et de masques chirurgicaux Système de capteurs peu coûteux surveiller l'état des patients atteints de la COVID-19 Trousse de diagnostic au point de service et à domicile pour le COVID-19 APPLIQUEZ EN LIGNE

  • Ukraine, Canada defence ministers discuss epidemiological situation in countries’ armed forces

    9 avril 2020 | Local, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

    Ukraine, Canada defence ministers discuss epidemiological situation in countries’ armed forces

    Defence Minister of Ukraine Andriy Taran discussed during a phone conversation with Minister of National Defence of Canada Harjit Sajjan the security situation in Ukraine and around the world amid coronavirus pandemic. “Yesterday, April 7, Defence Minister of Ukraine Andriy Taran had a phone conversation with Minister of National Defence of Canada Harjit Sajjan. The main topic of the dialogue was the discussion of the security situation in Ukraine and around the world in the context of the current epidemiological situation in the armed forces of both countries. The Minister of National Defence of Canada reiterated the continued unconditional support for Ukraine's sovereignty and territorial integrity, and the willingness of the Canadian Defence Ministry to assist in enhancing the military capabilities of the Armed Forces of Ukraine. In particular, the parties discussed the continued support for the training mission of Canada in Ukraine and resumption of its activities in full after the completion of measured related to combating coronavirus pandemic,” the press service of the Ministry of Defence of Ukraine informs. In the context of enhancing the combat readiness of the Armed Forces of Ukraine, Andriy Taran emphasized the invariance of the continuation of consistent defence reform in Ukraine. In turn, Minister Sajjan welcomed the continued reform of the Ukrainian military under NATO standards and assured of support for Ukraine's accession to the NATO EOP and unblocking of the NATO-Ukraine Commission. The Defence Minister of Ukraine confirmed the priority of continuation of the Euro-Atlantic integration policy in the Ministry of Defense of Ukraine and also informed the Canadian counterpart about the key goals and priorities of the Ministry's activity. As noted, Harjit Sajjan stressed that the Canadian side was ready to use the Embassy of Canada in Ukraine as a point of contact to promote the mentioned issues among its allies. The parties also discussed a number of issues regarding the continuation of Canada's advisory assistance to Ukraine and the intensification of military and technical cooperation. https://www.ukrinform.net/rubric-defense/3001306-ukraine-canada-defence-ministers-discuss-epidemiological-situation-in-countries-armed-forces.html

  • U.S. Small Businesses May Get More COVID-19 Emergency Funding

    8 avril 2020 | International, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

    U.S. Small Businesses May Get More COVID-19 Emergency Funding

    Sean Broderick WASHINGTON—The Trump Administration has asked Congress for an additional $250 billion in small-business payroll loan funding, providing more cash to the coronavirus pandemic emergency funding program that many small aerospace suppliers are expected to tap. U.S. Treasury Secretary Steve Mnuchin tweeted the news April 7, confirming that, “at the direction of President Trump,” he has asked Democrat and Republican leaders in both the House of Representatives and Senate for more Paycheck Protection Program (PPP) funding “to make sure small businesses get the money they need!” The PPP, part of the March 27 Coronavirus Aid, Relief, and Economic Security (CARES) Act, was set up to quickly get funds to eligible businesses to cover eight weeks of payroll costs as well as most rent, utility and mortgage-interest expenses. Companies can apply for a one-time PPP loan of up to 2.5 times their average monthly 2019 payroll, up to a maximum $10 million. So long as 75% of the funds are used for payroll costs, the loans do not have to be repaid, making them de facto grants. The CARES Act allocates $349 billion to the program, but early popularly suggests that more funding may be needed to meet demand. The Small Business Administration (SBA) processed more than $70 billion in loans in PPP's first three days after the program opened April 3, though it did not say how much of that has been funded. Some 250,000 small businesses, out of an estimated 30 million, have applied for PPP funds. Mnuchin said he has spoken with Congressional leaders and is confident that he has bipartisan buy-in. “We look forward to the Senate passing that on [April 9], and the House passing that on [April 10]” Mnuchin told reporters during an April 7 media briefing. Additional funding could be approved quickly. Senate Majority Leader Mitch McConnell (R-Kentucky) said in a statement that he would work with Mnuchin and fellow Senate leaders to approve further funding within days. House Democrats are already working on a larger bill, which leader Nancy Pelosi calls CARES 2, that includes more PPP funding. PPP loan applications, submitted through the SBA Small Business Administration (SBA) and funded by participating lenders, began rushing in as soon as the program opened April 3. SBA Mnuchin said April 7 that more than 3,000 lenders are onboard, with additional institutions expected to participate. The program experienced some early hiccups, due in part to its scale and how quickly it has come together. CARES became law on March 27, and interim rules on how PPP would work were issued late April 2, just hours before applications were set to start. The PPP's broad applicability, lack of requirements for guarantees or other collateral, and de facto grant properties—the loans become forgivable if guidance is followed—have made it a catch-all for many small businesses. The general SBA limit for a small business is 500 employees, but it is based on staff or revenue limits set in the North American Industry Classification System. Many aviation businesses, aircraft and engine parts makers and maintenance providers, have limits above 500 employees. The PPP's potential reach and theoretically streamlined application and fulfillment times mean industry trade associations that represent smaller businesses are urging their members to examine PPP loans. https://aviationweek.com/air-transport/aircraft-propulsion/us-small-businesses-may-get-more-covid-19-emergency-funding

  • CAE answers the federal government’s call to procure ventilators

    8 avril 2020 | Local, Aérospatial, C4ISR

    CAE answers the federal government’s call to procure ventilators

    The federal government has launched an accelerated procurement plan with several Canadian companies, including Montreal-based CAE, to procure up to 30,000 ventilators. “Canadian companies are answering the call to protect our health care professionals with made-in-Canada solutions,” said Prime Minister Justin Trudeau in a statement on Apr. 7. “This is exactly the kind of innovative, collaborative thinking we need to respond to this rapidly evolving pandemic.” CAE is best known in the aerospace sector for aircraft simulators and training services, helping train over 150,000 pilots per year worldwide. But for more than a decade, the company has also made a name as a healthcare training solutions provider for colleges, universities and hospitals and for medical equipment manufacturers. That includes patient simulators that respond to treatment, including intubation and ventilation. “We have the [medical] and engineering expertise in house – electrical, mechanical, software and human physiology,” said Erick Fortin, director of engineering at CAE Healthcare. A team of 12 engineers took up a challenge issued on Mar. 21 by the Montreal General Hospital Foundation and McGill University Health Centre to develop a simple and low-cost ventilator. Within 10 days, they had a working prototype built with parts from around the lab. “It worked quite well,” said Fortin. “It showed how you can put a team together with the right experts ... and what we can do.” For a company that on Apr. 6 announced the temporary laying off of 2,600 of its 10,500 employees and reduced work weeks for another 900, the opportunity “to do something” has been rewarding. “The whole company is mobilized,” he said. “We are really prepared to produce and we are productizing.” From that initial team of a dozen engineers, the project now has about 100 employees involved. And CAE expects to pull in more as they move to full production. CAE might not be the only company in the Montreal aerospace cluster seeking to solve the ventilator shortage. According to industry think tank Aero Montreal, Pratt & Whitney Canada is also exploring how to use its engineering and manufacturing capabilities to design and validate a ventilator concept that would likely “pull on local manufacturing,” including from Bombardier and AON3D. Fortin said CAE had received “hundreds and hundreds” of emails from companies interested in supplying components, from valves to flow sensors. Though all options are under consideration, including having several contingency plans at the ready, the priority would be to find Canadian suppliers who can deliver high volume. “Some parts are a bit more complex to source, like valves. We'll look at all offers, at all suppliers that can help,” he said. “We are confident that we have everything we need. We certainly have the expertise in house to do the production of thousands of ventilators.” CAE must still fine-tune the prototypes, but it intends to deliver about 10,000 units within three months once it starts production. A low-cost solution might have been part of the engineering team's initial objective, but Fortin admitted the final price might be higher than a typical commercial ventilator. “We try to build it as low as possible,” he said. “As you can imagine, as time is of the essence, cost will be a bit higher that what it could be with a bit more time.” CAE will also be leaning on its training expertise to ensure the final product comes with a complete operator training package. Since mid-March, in fact, the company has been offering online re-skilling courses for ventilators and has released a number of COVID-19 scenarios on its current products such as patient simulators. Fortin noted that more than 2,000 health professionals had participated in coronavirus-related webinars “After 25 years at CAE, I am always surprised at how nimble a big company like this can be, and how we can adjust to different situations,” he said. In its statement on Apr. 7, the government said that about 5,000 Canadian companies have offered expertise and capacity to develop and produce medical personal protective equipment, hand sanitizers and other protective gear. The government is also “working through over 22,000 submissions to Public Services and Procurement Canada from companies interested or able to sell to Canada. All efforts are being made to secure contracts and deliveries as quickly as possible.” “In mobilizing industry and creating partnerships, we are moving swiftly to build up a secure domestic supply of key personal protective equipment to protect Canada's frontline health workers as they fight this pandemic,” said Navdeep Bains, Minister of Innovation, Science and Industry. https://www.skiesmag.com/news/cae-federal-governments-call-procure-ventilators/

  • The Pentagon’s supply chain faces an economy under siege

    8 avril 2020 | International, Aérospatial, Naval, Terrestre, C4ISR, Sécurité

    The Pentagon’s supply chain faces an economy under siege

    By: Valerie Insinna and Aaron Mehta WASHINGTON — On the morning of April 2, companies up and down the Pentagon's supply chain got an email from Eaton Aerospace, a mid-tier supplier that provides parts such as fuel pumps and hydraulics to defense primes for aircraft like the KC-46 tanker and F-35 Joint Strike Fighter. “The truly unprecedented situation with [the coronavirus] COVID-19 is jointly affecting our business, families and communities we live in,” said one such email, which was obtained by Defense News. “While the health and safety of our employees and those of our supply partners remains paramount, our industry is significantly impacted. ... As a result, our Eaton Grand Rapids, [Michigan], plant will [be] closed starting April 4, 2020 and will reopen on April 13, 2020." Similar emails for other locations followed. In a statement, Eaton Corp. spokeswoman Margaret Hagan acknowledged that the company was temporarily implementing closures “at a few sites,” but maintained that there would be no impact to the “critical support” provided to the U.S. military. “We've made the important decision to maintain operations during the COVID-19 crisis because Eaton products are critical to our global infrastructure,” she said. “As a strategic supplier of aerospace fuel, hydraulic, motion control, electrical and engine solutions for the aerospace and defense sector globally, Eaton's aerospace products and support services are vital not only to the military, but to the transport of passengers and goods around the world.” Although perhaps not a household name in the defense sector, Eaton is far from a small business, bringing in more than $21 billion in sales in 2019. However, the quiet closure of its production lines illustrates how widespread the impacts of COVID-19 have reached — past the major prime contractors like Boeing, or even its major subcontractors like Spirit AeroSystems, and to the large and small companies that populate the middle and lower tiers of its supply chain. “The whole supply chain is a mess right now,” said an employee of one electronics manufacturer that provides components for both commercial and defense products. The source, whose name and company affiliation Defense News is withholding to protect the individual from reprisal, described challenges with working from home and retaining workers on the production line. Some colleagues, the source said, are choosing to take paid leave or voluntary layoffs rather than risk exposure to COVID-19. “We are at 20 percent capability,” the source said. According to Jeremy Bash, a former Pentagon official now with Beacon Global, “there is deep concern among industry and department leaders that the second- and third-tier suppliers need to be protected." “There's a sense DoD [the Department of Defense] needs better visibility into the supply chain, mapping out how a part makes its way into a plane or ship," Bash added. “There is a growing number of tech companies providing software to illuminate supply chains, and since COVID, the phones of those companies have been ringing off the hook because the department now realizes supply chain concentration is a huge risk.” ndustrial shock waves But one doesn't have to dive down the supply chain toward Eaton to see that the defense market is taking a beating, particularly the companies that also have a strong exposure to the commercial market. Up until last month, financial analysts would have seen commercial sales as a major boon to the overall health of a defense supplier, but that has changed, as the economy has taken a nosedive, said Richard Aboulafia, a defense and aerospace analyst with the Teal Group. “The commercial market is under siege, which means of course there is excess inventory, slumping revenue, major challenges on many levels,” he said. "On top of that, everybody faces the immediate impact of social distancing and workforce concerns. And on top of that, if you're heavily exposed to commercial, the harder time you might have getting credit. All of these are big issues. "The defense-industrial base, if it could somehow be removed from commercial aviation, we'd be in pretty good shape by the standards of the world economy. But we can't. They're intertwined.” Bloomberg reported Monday that Airbus sent a letter to employees over the weekend, warning that gaps in the supply chain, among other issues, will impact the company's ability to resume normal operations. Also on Monday, simulation firm CAE announced it was temporarily laying off 2,600 of its 10,500 global employees, while placing another 900 employees on a reduced work week. The company also instituted salary freezes and reductions for remaining staff, ranging from 50 percent for the CEO and executive team down to 10 percent for regular employees. Roughly 40 percent of CAE's overall revenue comes from defense contracts, according to the Defense News Top 100 list. Boeing, meanwhile, extended a shutdown of its Puget Sound, Washington, facilities, while also stopping work at its rotorcraft production line in Philadelphia, Pennsylvania. As a result of the Puget Sound shutdown, Spirit AeroSystems announced last week that it is halting work at a number of locations. Small businesses that form a core of the Pentagon's future technological development may be particularly vulnerable, according to government data and analytics firm Govini. In a new data sheet, the company noted there are roughly 50,000 small businesses that provide innovation support for the DoD, all of which is vulnerable to economic upheaval. “If this ecosystem suffers widespread failure due to COVID-19, the resulting impact will stretch well beyond short-term disruptions,” Govini said. “These vendors are not just critical links in the DoD supply chain important for immediate purposes. They are also vital for the development of both next-generation systems in the midterm and revolutionary capabilities that will shape the competitive landscape for decades into the future.” Between fiscal 2015 and fiscal 2019, roughly 28 percent of defense spending on underwater unmanned vehicles — a key part of the U.S. Navy's plan to build a fleet of the future — went to small businesses, according to Govini numbers. Small business contracts also accounted for 30 percent of the DoD's research on artificial intelligence during that same time period. Martijn Rasser, a senior fellow at the Center for a New American Security, warned Defense News last month that “for small business, a shutdown would be extremely difficult to get through because even with bailouts and economic stimulus, once those businesses close up, its really hard to get those started again.” “If an airline goes out of business, the planes don't disappear — you can start over. If it's a highly specialized manufacturing company, those employees are going to disperse and try to find other work. So I think that's something to be very cognizant of because of all the consolidation in the defense industry,” he added. “If they have to curtail operations for an extended period of time, it's extremely difficult to get it going again.” What's the Pentagon's response? Starting March 20, the Pentagon began issuing guidance on how to support industry. But a three-day span last week showed how those efforts remain a moving target, particularly in relation to the smallest suppliers. On March 30, the department's acting director of defense pricing and contracting, Kim Herrington, issued guidance to contracting officers that essentially said industry should not be penalized for missing performance targets as a result of the ongoing pandemic. “We must do our utmost to ensure that both the Department and the vital industrial base that support us remain healthy for the duration of this emergency and emerge as strong as ever from the challenges of this pandemic,” Herrington wrote. But some in Congress feel the department is still not doing enough to clarify policy changes for contracting officers and defense companies. On April 1, a group of Ohio lawmakers wrote to Defense Secretary Mark Esper and Under Secretary of Defense for Acquisition and Sustainment Ellen Lord, warning that “we are concerned that guidance to the defense contractor workforce remains ambiguous and lacks uniformity in application,” particularly in terms of communication from department contracting officers to small companies. Over the past several years, the Pentagon has worked to delegate decision-making authorities to low-level contracting officers. But while that may work to empower contracting officers to find creative solutions to problems under normal circumstances, during a pandemic, these officials are ill-prepared to decipher “uncertain, often conflicting guidance,” the lawmakers said. The lawmakers asked that contracting officers be directed to ensure that contractors are allowed to work remotely to the maximum extent possible; that contractors be given “maximum flexibility to meet their contractual obligations”; that efforts be made to not have “avoidable reductions” in the workforce; and that companies involved in research and development work be clearly labeled as essential personnel. And on April 2, two trade groups — the National Defense Industrial Association and the Professional Services Council — asked Congress to instate a six-month delay for a legal requirement included in the 2019 National Defense Authorization Act that prohibits the government from doing business with companies that work with vendors Huawei and ZTE. That language “will impose significant financial and operational costs on medium- and small-sized firms at a moment of substantial uncertainty and hardship,” at a time when they are dealing with the economic impact of the coronavirus pandemic, the letter stated. Later in the day, the DoD released a statement providing clarification on previous announcements. The department confirmed that higher progress payment rates — which had been jumped the previous week — will apply to already completed work, and not just future production. The new cash-flow rules should result in more than $3 billion in new cash moving into industry, according to department estimates. But that prediction came with a warning: The Pentagon “has high expectations that that prime companies are ensuring cash flow is moving to small businesses in their respective supply chains who need it most.” So far, the Defense Contract Management Agency has modified approximately 1,400 contracts with increased rates, the announcement noted. Contracting officials are working to ensure invoices at the higher progress payment rate keep arriving on time, with the department claiming there have been “no reported delays on contractor submitted invoices.” The announcement also stated that any delay related to COVID-19 issues will result in “an equitable adjustment of the contract schedule and cost,” meaning the department will adjust the contracts so that the vendor does not take an economic hit. The steps taken by the department are important, said Bash, the former Pentagon official. “The most powerful force the government can bring to help these companies is to say to industry: ‘We have money,' ” he said. A wildcard, Bash noted, is the $17 billion in national security-focused funding made available under the most recent stimulus package passed by Congress. However, Byron Callan, an industry analyst with Capital Alpha Partners, warns that more money doesn't necessarily mean less problems. “The DoD faces the same issues as any other branch of the government or the Fed that is providing more cash to address the crisis — if people aren't at work because of COVID-19, that cash won't help much in keeping a factory or office open and all projects on schedule," Callan said. For Aboulafia, increasing the value of progress payments is a good first step for increasing the flow of cash to suppliers. “In times like this, it really is about access to cash because of the risk of credit markets freezing up for commercial companies. Accelerated payments, maybe loan guarantees should be considered," Aboulafia said. But he's realistic that the defense industry isn't the only issue on the table for the Trump administration. “I think there's a lot that government can do,” Aboulafia said. "Unfortunately there's a lot that government has to do because the entire economy has been put into a medically induced coma.” https://www.defensenews.com/coronavirus/2020/04/08/the-pentagons-supply-chain-faces-an-economy-under-siege

Partagé par les membres

  • Partager une nouvelle avec la communauté

    C'est très simple, il suffit de copier/coller le lien dans le champ ci-dessous.

Abonnez-vous à l'infolettre

pour ne manquer aucune nouvelle de l'industrie

Vous pourrez personnaliser vos abonnements dans le courriel de confirmation.