4 octobre 2018 | International, Aérospatial, C4ISR
By ARIE EGOZI
TEL AVIV: Israel is planning constellations of nano satellites, built by Israel Aerospace Industries (IAI), that will allow almost continuous coverage of “areas of interest,” which are likely to include Iran, Syria, Lebanon and other countries, according to experts that are not connected in any way to the program. IAI refused to comment.
The first nano satellite was developed by IAI and was launched into space in 2017 as part of a scientific experiment. The 5-kilogram satellite — approximately the size of a milk carton — is equipped with special cameras able to identify various climatic phenomena, and a monitoring system that allows the choice of areas to be imaged and researched.
”We are developing the capability to launch a constellation of Nano satellites. The large number of satellites will give us the capability for a much higher rate of revisits, and actually a continuous monitoring of areas of interest.” says Opher Doron, general manager of IAI's Space Division.
The nano satellites optical payloads are smaller and the quality of their optical payloads is lower. ”But by using a temporal resolution method this problem is dealt with in a very effective way,” Doron claims. “This method is not directly related to the quality of the sensor but is based on the frequency of revisits over a site.“
The other problem with smaller satellites is color. “Resolution is, of course, very important but we also work on improving the color quality of the images, Doron said. “A good intelligence expert does not need color to extract, the needed intelligence from a satellite image, but when it comes to decision-makers, color is of great importance.”
What underpins all this? It takes a ballistic missile 12 to 15 minutes to travel from Iran to Israel. The earlier a launch is detected and the earlier the trajectory of the missile can be plotted, the better the chances to intercept it far from its designated target.
Today, low orbit Ofeq spy satellites visit “areas of interest” in wide intervals so their optical or radar payloads cannot keep a persistent watch. When it comes to the ballistic missile threat, this is a major problem. Israeli sources say that some 30 minutes are needed from the command to prepare a ballistic missile for launch until it is ready for launch, and this if the protection silos are well equipped. If the enemy is aware of the “visiting” time of the spy satellites over his territory this can be the perfect time to avoid detection of the preparations until the launch itself.
Once launch occurs, Israel is supposed to get warnings from Lockheed Martin's Space-Based Infrared System (SBIRS),the US constellation of geosynchronous earth orbit (GEO) satellites. The U.S also deploys an X-band radar system in southern Israel to improve detection of ballistic missiles. This complements the layer supplied by the Green Pine radar, part of the Israeli Arrow missile interceptors.
The first nano satellite was launched from India on the PSLV-C37 launcher with 103 other nano satellites. The plan to build and launch nano satellites first emerged a decade ago. A joint company of IAI and Rafael would undertake the mission. But that plan was deserted.
Yizhak Ben Israel, chairman of the Israeli space agency, served in the Israeli air force and later was in charge of developing Israel's most advanced and classified military systems at the development directorate in the Defense Ministry. He notes that, although nanosats possess much less exquisite capabilities than SBIRS or other large satellites, “when you use a constellation of such satellites the combined capability can be very effective in missions like locating missile launchers.” The other advantage of nano satellites is their price: “You go from hundreds of million of dollars for a full size imaging satellite to some millions of dollars when it comes to a nano satellite.”
Not directly related to the nano satellite program but part of Israel's space effort, IAI teamed with British start-up company Effective Space to make a fleet of special satellites weighing roughly 880 pounds that can refuel other satellites in space. IAI signed an agreement for technological and financial cooperation with the smaller company. While Effective Space is headquartered in London, its CEO, Arie Halsband, was general manager of IAI's space division before starting his own company.
https://breakingdefense.com/2018/10/israel-plans-anti-missile-nano-satellite-constellation
19 août 2024 | International, C4ISR, Sécurité
Cybersecurity experts uncover new FIN7 infrastructure in Russia and Estonia, revealing the threat actor's evolving network strategy and global reach.
15 avril 2024 | International, C4ISR
Did you know? Implementing JIT privileged access can drastically cut down the risk of privilege misuse! Learn how to secure your systems with JIT stra
1 mai 2019 | International, C4ISR
DARPA's SIGMA program, which began in 2014, has demonstrated a city-scale capability for detecting radiological and nuclear threats that is now being operationally deployed. DARPA is building off this work with the SIGMA+ initiative that is focused on providing city- to region-scale detection capabilities across the full chemical, biological, radiological, nuclear, and explosive threat space. DARPA initiated a SIGMA+ pilot study last year known as ChemSIGMA to provide initial data and insights into how new chemical sensors using the existing SIGMA network would function. The chemical sensor package incorporates a chemical sensor, wind sensor and communications board into a weatherproof housing. Sensors report wind readings and real-time chemical information to a central cloud-hosted suite of fusion algorithms. “The algorithms were developed using a custom simulation engine that fuses multiple detector inputs,” said Anne Fischer, program manager in DARPA's Defense Sciences Office. “We built the algorithms based on simulant releases in a large metropolitan area – so we took existing data to build the algorithms for this network framework. With this network, we're able to use just the chemical sensor outputs and wind measurements to look at chemical threat dynamics in real time, how those chemical threats evolve over time, and threat concentration as it might move throughout an area.” In the pilot study, DARPA researchers from MIT Lincoln Laboratory, Physical Sciences Inc., and Two Six Labs, built a small network of chemical sensor packages. In partnership with the Indianapolis Metropolitan Police Department, Indianapolis Motor Speedway, and the Marion County Health Department, DARPA's performer teams deployed the network on-site at the Indianapolis Motor Speedway in late April 2018. The chemical sensor network and the data collected during events such as the 2018 Indianapolis 500 were critical to the DARPA effort, allowing the team to assess the performance of the sensors and network algorithms. These tests were conducted in an urban environment to ensure that the system could handle complex and stochastic signals from species that are ever present in a city's chemical background. Significantly, the network-level algorithm successfully improved system performance by correctly suppressing false detection events at the individual detector level. The group of DARPA researchers was also able to collect a large relevant data set and valuable user feedback that will guide ongoing system development efforts. Further testing with safe simulant/concert smoke at Indianapolis Motor Speedway, August 2018 During additional tests in August 2018, a non-hazardous chemical simulant was released in the empty Indianapolis Motor Speedway at a realistic threat rate. Concert fog was also released to serve as a visible tracer. The propagation of the visible tracer was observed in aerial photography, and ChemSIGMA sensors and algorithms determined the release location with unprecedented accuracy. The web-based ChemSIGMA interface allows the user to view alerts in real time across a variety of devices. Multiple trials were conducted over the course of several days assessing performance over a variety of meteorological conditions. Releases occurred during daytime and nighttime with a full range of wind directions and speeds. The ChemSIGMA prototype system detected all of the simulant releases and generated zero false alarms over the course of testing. Department of Defense simulant testing at Dugway Proving Ground, Utah, October 2018 “We're looking at how we might make this network more robust and more mature,” Fischer said. “For example, we implemented a network at Dugway Proving Ground as part of a DoD test for simulant releases, and have shown that the network can respond to a number of chemical simulant threats different than those used in Indianapolis, as well as built-in capabilities for mobile releases. Over the past few months, the team has used these data sets to further refine the algorithms, and plans to integrate and test them with the ChemSIGMA system in test events scheduled later this year.” The successful pilot and simulant test of the ChemSIGMA system at the Indy500 and Dugway Proving Ground provided valuable, relevant, and realistic data sets for validation and verification of the source localization and plume propagation algorithms. DARPA is currently extending the capabilities for networked chemical detection by advancing additional sensor modalities, including short-range point sensors based on techniques, such as mass spectrometry, and long-range spectroscopic systems. As these systems are further developed and matured, they will be integrated into the SIGMA+ continuous, real-time, and scalable network architecture to increase the system's capabilities for city-scale monitoring of chemical and explosive threats and threat precursors. https://www.darpa.mil/news-events/2019-04-30