16 novembre 2017 | Local, Aérospatial

Australian F-18s being considered by Canada will need overhaul to keep flying

Canada is waiting to hear back from Australia on its offer to purchase F-18s from that country.

The Australian planes would be added to the RCAF's flight line to shore up the existing fleet of CF-18s.

But if that deal does proceed the RCAF expects that structural work will have to be done to extend the lives of the planes.

RCAF commander Lt.-Gen. Michael Hood suggested to Defense News and FlightGlobal that L-3 in Quebec would get any upgrade contract since that firm has done similar work for the airforce on its existing CF-18s.

But Hood told Defense News at the Dubai airshow that even with that work to be done, the RCAF would be able to acquire the Australian aircraft “within the next couple of years” once a decision is made.

http://ottawacitizen.com/news/national/defence-watch/australian-f-18s-being-considered-by-canada-to-need-overhaul-to-keep-flying?utm_source=skies-daily-news-news-from-the-web

Sur le même sujet

  • Here are just some of the ways Canadian technology keeps Americans safe

    11 juin 2018 | Local, Aérospatial, Naval, Terrestre, C4ISR

    Here are just some of the ways Canadian technology keeps Americans safe

    It's been a week since the Trump White House slapped Canada with steel and aluminum tariffs on the ground that reliance on our imports was threatening the “national security” of the United States. If Canadians are particularly galled at this, it might be because no foreign country in modern times has done more to arm and equip the United States than Canada. “I would not be surprised if every single major aircraft or warship in U.S. military service today has Canadian components in it,” said Richard Shimooka, a senior fellow at the Macdonald-Laurier Institute. Below, a cursory summary of some of the Canadian stuff used by history's most powerful military. Landing gear We'll start with an entry that directly concerns steel and aluminum. Quebec-based Héroux-Devtek is the world's third largest aircraft landing gear company, and some of that is thanks to a longstanding relationship with the U.S. Air Force and U.S. Navy. Specifically, Héroux-Devtek is in charge of landing gear repair and overhaul for several large U.S. aircraft, including the heavy-lift C-130 Hercules. Of course, landing gear is made almost entirely of steel or aluminum. So, thanks to these new tariffs, American military procurers are either going to start getting hosed on their Héroux-Devtek contracts — or they're going to have start getting their landing gear overhauls from a U.S. company that isn't their first choice. Armoured personnel carriers “Canada and the US have been building military equipment for each other since the summer of 1940,” David Bercuson, a military historian at the University of Calgary, told the National Post. “Literally billions of dollars of such equipment has passed the border since then.” The most obvious example is the Stryker. There are nearly 5,000 Stryker armoured personnel carriers in the U.S. military, and all of them were built in London, Ontario. Not only that, but the Stryker is even based on a Canadian design, the LAV III. Coming in at a rock bottom $4 million apiece, the Americans use Strykers for everything: Ambulances, firefighting, missile platforms, chemical weapons defence and mine detection. They even started rigging them up with giant lasers to shoot down enemy drones. Armoured vehicles happen to be a Canadian specialty. While the United States was busy throwing money at big ticket items such as tanks and attack helicopters, the shoestring Canadians have gotten very good at the much cheaper task of simply strapping guns and armour to oversized trucks. And if a U.S. diplomat found themselves touring Iraq in an armoured Toyota Land Cruiser, chances are good they were shielded from bullets and IEDs by Canadian workmanship. Specialized aircraft Here again, the United States has it covered when it comes to big ticket aircraft such as fighters or bombers. But the U.S. military will occasionally call up Canadian plane-makers when it needs something quirky. Bombardier has retooled some of its airliners and business jets to act as airborne radar platforms. When the United States Army Parachute Team appears at air shows, they're jumping out of a Canadian-made de Havilland Twin Otter. De Havilland has also hooked up the Americans with some of its famously rugged prop planes for use in electronic warfare, remote cargo drops or simply moving National Guard troops around Alaska. All told, the U.S. military is flying more planes built in Canada than in any other foreign country. The U.S. military's only cargo drone (and it has the most Canadian name imaginable) A U.S. special forces unit is pinned down on a remote Central Asian mountaintop. Surrounded by militants on all sides, it needs an emergency airlift of water and ammunition to even see daybreak. Enter the SnowGoose, an unmanned autogyro specializing in precision deliveries to special forces. The SnowGoose is the U.S. military's only cargo drone, and it's an all-Canadian creation. An emerging theme on this list is that Canada is great at building niche military hardware for cheap, and the SnowGoose is no exception. As the drone's Stittsville, Ont. builders note, it can move cargo across a battlefield at a fraction of the price of other drones. Nuclear fuel Uranium is a big part of the modern U.S. military. It has more than 100 nuclear-powered vessels in the navy, and there's also those 7,000 atomic weapons it still has lying around. Canada has sold a whole lot of uranium to the U.S. military, going all the way back to the initial atomic bombs dropped on Hiroshima and Nagasaki in 1945. However, the taps were somewhat shut off in the 1960s, when Canada started limiting uranium exports to “peaceful” purposes. Still, with Canada ranking as the United States' top uranium dealer, we help keep their uranium topped up enough to have plenty left over for the military. Speaking of nuclear weapons, it might behoove the White House to remember that if a Russian or North Korean missile should happen to be fired in their direction, a Canada-based NORAD station will likely be among the first to let them know. Making fighter jets last forever This entry should fill thrifty Canadians with particular pride: We've gotten so good at squeezing every penny out of our CF-18s that we're now globally renowned experts at fighter jet life extension. Among other things, Canada invented “robotic shot-peening,” a method of using robots to restore aging aircraft with a precision never before known. The technology has been exported to Europe, Australia and, in 2013, the U.S. Navy brought in the Quebec aerospace company L-3 MAS to give its jets a makeover. Battlefield communications Tactical radios are another niche technology in which Canadian companies have a built a slow but steady reputation with the Americans. In a 2017 reporton Canada/U.S. military industrial cooperation, the Center for Strategic and International Studies noted that the U.S. military has been using Canadian radios since the 1960s. Ultra TCS, headquartered in Montreal, remains a supplier of tactical radios to both the U.S. Army and Marine Corps. And these aren't just walkie-talkies; they're hyper-advanced networks that can provide email, voice and even video hook-ups to American troops in battle. Jeeps That's right. The Second World War-era Willys Jeep — one of the most American vehicles in history — was manufactured in part by Canada. Ford Motor Company of Canada churned out thousands of Jeeps after the Second World War. In 1952 alone, Canadian factories were making an average of seven of them per day. According to Ford Canada's website, “these postwar Canadian-made Jeep were shipped to the United States, for the American military forces.” Space robots DARPA is the U.S. agency tasked with pursuing military so cutting edge that they occasionally veer into outright science fiction. Last year, DARPA signed a deal with Canada's MacDonald, Dettwiler and Associates to design robots that could be dispatched into space in order to repair U.S. military satellites. And like most times Canada is brought in for U.S. military stuff, the robot space mechanic program is indeed intended as a cost saving measure. Canada has been a leader in space defence for some time. Our beloved Canadarm, in fact, technically qualifies as an early military space robot. Over the course of the space shuttle program 11 missions were sent up to perform classified work for the Pentagon. We still don't know the specifics of what the Canadarm did for Uncle Sam on those missions, but the arm is a certifiable Cold Warrior. http://nationalpost.com/news/canada/security-threat-our-butt-here-are-just-some-of-the-ways-canadian-technology-keeps-americans-safe

  • Le gouvernement du Canada annonce l’attribution d’un contrat à Cellula Robotics Ltée pour la recherche et le développement à l’appui de la surveillance sous-marine dans l’Arctique

    23 avril 2018 | Local, Naval

    Le gouvernement du Canada annonce l’attribution d’un contrat à Cellula Robotics Ltée pour la recherche et le développement à l’appui de la surveillance sous-marine dans l’Arctique

    Communiqué de presse De : Défense nationale Le 6 avril 2018 – Ottawa (Ontario) – Défense nationale/Forces armées canadiennes Dans la politique de défense du Canada, Protection, Sécurité, Engagement, le ministère de la Défense nationale (MDN) s'engage à mettre l'accent sur la recherche et le développement en matière de défense afin de trouver des solutions novatrices aux problèmes de surveillance dans le Nord, y compris les secteurs prioritaires du renseignement, de la surveillance et de la reconnaissance dans l'Arctique. Le Gouvernement du Canada a attribué un contrat à Cellula Robotics ltée pour la mise au point d'une pile à combustible qui améliorera la capacité des véhicules sous-marins autonomes de stocker suffisamment d'énergie pour entreprendre des missions lointaines et de longue durée. Ce contrat, d'une valeur totale de près de 648 000 $, est attribué dans le cadre de l'appel de propositions d'innovation 2016 pour le programme de sciences et technologie (S & T) sur la connaissance de la situation dans tous les domaines (CSTD). Les solutions de surveillance appuient la capacité du gouvernement du Canada d'exercer sa souveraineté dans le Nord et sensibilisent davantage aux enjeux en matière de sécurité, ainsi qu'aux activités commerciales et de transport dans l'Arctique canadien. De plus, des solutions peuvent contribuer aux efforts conjoints du Canada et des États-Unis pour renouveler le Système d'alerte du Nord et moderniser des éléments du Commandement de la défense aérospatiale de l'Amérique du Nord (NORAD). Gr'ce à un investissement de près de 133 millions de dollars jusqu'en 2020, les responsables du programme de S & T sur la CSTD coordonnent et financent des recherches et des analyses novatrices pour appuyer l'élaboration d'options visant à améliorer la connaissance du domaine des approches aériennes, maritimes et sous-marines du Canada, en particulier dans l'Arctique Citations « Afin de relever les défis canadiens, nous devons explorer des solutions novatrices canadiennes, surtout compte tenu de l'étendue du littoral de l'Arctique. Nos établissements d'enseignement et notre industrie de l'innovation comptent parmi les meilleurs au monde, et nous sommes fiers de travailler avec eux pour traiter des questions de surveillance particulièrement complexes concernant l'Arctique. » Ministre de la Défense Harjit S. Saijan « Notre gouvernement s'est engagé à fournir aux militaires des Forces armées canadiennes les outils dont ils ont besoin pour réaliser leur travail, tout en assurant le meilleur rapport qualité-prix possible pour les Canadiennes et les Canadiens. Ces contrats feront appel à l'expertise canadienne pour élaborer des technologies de surveillance de pointe pour l'Arctique. » Ministre des Services publics et Approvisionnement, l'honorable Carla Qualtrough Faits en bref La CSTD est un programme dirigé par le MDN, qui vise à tirer parti de l'expertise scientifique et technologique innovatrice d'autres ministères, du milieu universitaire, de l'industrie et des alliés, afin d'identifier, d'évaluer et de valider les technologies à l'appui de la surveillance aérienne et maritime, en particulier dans le Nord. Recherche et développement pour la défense Canada (RDDC), l'organisation de la Défense nationale spécialisant en sciences et technologie, est le chef de file national en S & T. Cette organisation fournit à la communauté de S & T pour la défense, aux Forces armées canadiennes et à d'autres ministères, ainsi qu'aux groupes de sécurité publique, les connaissances et la technologie nécessaires pour défendre et protéger les intérêts du Canada au pays et à l'étranger. Produits connexes Documentation - Le gouvernement du Canada annonce l'attribution d'un contrat à Cellula Robotics Ltée pour la recherche et le développement à l'appui de la surveillance sous-marine dans l'Arctique Liens connexes Programme de connaissance de la situation dans tous les domaines Le gouvernement du Canada annonce les contrats attribués dans le cadre du Programme de science et technologie pour la connaissance de la situation dans tous les domaines Le gouvernement du Canada annonce la période de présentation des soumissions en réponse au processus d'appel de propositions 2016 pour des investissements en sciences et technologie Personnes-ressources Relations avec les médias Ministère de la Défense nationale Téléphone : 613-996-2353 Courriel : mlo-blm@forces.gc.ca Suivez Sciences et technologie de la Défense nationale (@DRDC_RDDC) sur Twitter Pour plus de renseignements, visitez le www.drdc-rddc.gc.ca https://www.canada.ca/fr/ministere-defense-nationale/nouvelles/2018/04/le-gouvernement-du-canada-annonce-lattribution-dun-contrat-a-cellula-robotics-ltee-pour-la-recherche-et-le-developpement-a-lappui-de-la-surveillanc0.html

  • Boeing Secures Services Contract for Canada's Chinooks

    5 avril 2018 | Local, Aérospatial

    Boeing Secures Services Contract for Canada's Chinooks

    Five-year performance-based logistics contract to provide lifecycle support for Royal Canadian Air Force's fleet of CH-147F Chinooks The follow-on contract covers full system logistics, engineering support, supply chain, data analytics and training services OTTAWA, Ontario, April 3, 2018 /PRNewswire/ -- Boeing (NYSE: BA) and the Canadian government have agreed to an amendment to an existing performance-based logistics (PBL) contract. Under the $313 million fixed-price amendment, Boeing will continue to provide full system logistics, engineering support, supply chain, data analytics and training services to the Royal Canadian Air Force's (RCAF) fleet of 15 CH-147F Chinooks through 2023. Operating under a 20-year performance-based sustainment and training contract since 2013, the RCAF reviews its Chinook fleet support requirements every five years. "We look forward to continuing our support of the Royal Canadian Air Force and its effort to reduce maintenance costs through this long-term agreement," said Turbo Sjogren, vice president of International Government Services, Boeing Global Services. "PBLs have a proven track record of increasing system availability, decreasing maintenance cycles through the use of predictive maintenance tools, and reducing overall ownership costs." Unlike traditional contracts based on payment for specific parts and services, under a PBL agreement, the customer pays for a support package with an agreed-to level of readiness, which can lower costs while increasing mission-capability rates. Boeing supports PBL contracts with customers around the world and across multiple platforms, including the Chinook. Through this contract, Boeing will also continue to work with companies across Canada in support of the country's Industrial and Regional Benefits Policy, which supports long-term opportunities for the Canadian aerospace industry and workforce. Currently, Boeing works with nearly 560 Canadian suppliers, and the company employs approximately 2,000 highly skilled workers throughout the country. Boeing Global Services, headquartered in the Dallas area, was formed by integrating the services capabilities of the government, space and commercial sectors into a single, customer-focused business. Operating as a third business unit of Boeing, Global Services provides agile, cost-competitive services to commercial and government customers worldwide. Contact Ken Mercer Boeing Global Services Office: +1 312-544-2229 Mobile: +1 312-218-9377 Kenneth.b.mercer@boeing.com http://boeing.mediaroom.com/2018-04-03-Boeing-Secures-Services-Contract-for-Canadas-Chinooks

Toutes les nouvelles