Filter Results:

All sectors

All categories

    2998 news articles

    You can refine the results using the filters above.

  • The coronavirus threatens NATO. Let’s move to protect the alliance.

    April 14, 2020 | International, Aerospace, Naval, Land, C4ISR, Security

    The coronavirus threatens NATO. Let’s move to protect the alliance.

    By: Sophia Becker , Christian Mölling , and Torben Schütz The global fight against COVID-19 has devastating economic consequences which might soon be felt in the defense sector. First estimates by OECD and national institutions conclude that the initial economic impact of the measures to fight the virus will by far exceed that of the 2008 financial crisis. The severe socio-economic consequences may tempt European governments to prioritize immediate economic relief over long-term strategic security and defense considerations. The good news is: there is no automatism – it remains fundamentally a political decision. If European governments do decide to slash defense spending as a result of the current crisis, it would be the second major hit within a decade. Defense budgets have only just begun to recover towards pre-2008 crisis levels, though capabilities have not. Nationally, as well as on an EU and NATO level, significant gaps still exist. European armies have lost roughly one-third of their capabilities over the last two decades. At the same time, the threat environment has intensified with an openly hostile Russia and a rising China. With European defense budgets under pressure, the United States might see any effort to balance burden-sharing among allies fall apart. A militarily weak Europe would be no help against competitors either. The US should work with allies now to maintain NATO's capabilities. Improve coordination to avoid past mistakes Europe's cardinal mistake from the last crisis was uncoordinated national defense cuts instead of harmonized European decisions. In light of the looming budget crisis, governments could be tempted to react the same way. This would be the second round of cuts within a decade, leaving not many capabilities to pool within NATO. If domestic priorities trump considerations about procurement of equipment for the maintenance and generation of military capabilities the system-wide repercussions would be severe. NATO defense, as well as the tightly knit industrial network in Europe, will suffer. Capabilities that can only be generated or sustained multinationally – like effective air defense, strategic air transport or naval strike groups - could become even more fragile; some critical ones may even disappear. If Europeans cut back on capabilities like anti-submarine warfare, armored vehicles of all sorts and mine-warfare equipment again, they could endanger the military capacity of nearly all allies. Ten years ago, such capabilities for large-scale and conventional warfare seemed rather superfluous, but today NATO needs them more than ever. This outcome should be avoided at all costs, because rebuilding those critical forces would be a considerable resource investment and could take years. Europe would become an even less effective military actor and partner to the US, resulting in more discord about burden-sharing. Uncoordinated cuts would also affect the defense industry, as development and procurement programs would be delayed or cancelled altogether – hitting both European and American companies. Moreover, their ability to increase efficiency through transnational mergers and acquisitions and economies of scale is limited due to continued national sentiments in Europe. Companies might decide to either aggressively internationalize, including massive increase of defense exports, or leave the market as national armed forces as otherwise reliable clients drop out. Technological innovation would suffer from a shrinking defense industrial ecosystem and duplicated national research and development efforts, risking the foundation of security for the next generation of defense solutions. To safeguard NATO's strategic autonomy, lean on lead nations In order to prevent the loss of critical capabilities and infrastructure within NATO, the US should immediately start working with its European partners to preemptively plan for increasingly tight budgets. NATO should take stock of existing capabilities and offer alternatives for consolidation. Based on a coordinated effort to redefine NATO's level of ambition and priorities, it should offer plans for maintaining the military capacity to act while retiring unnecessary and outdated resources. Such a coordinated effort should include close cooperation with the European Union. Building on the NATO Framework Nations Concept, the United States should work with a network of larger member states, better equipped to weather the economic shock of the current crisis, to act as lead nations. These countries could safeguard critical defense capabilities and provide a foundation of essential forces, enabling smaller partners to attach their specialized capabilities. Such an arrangement allows for a comparatively good balance of financial strain and retention of military capacity. Additionally, NATO should look beyond the conventional military domain and build on lessons learned from hybrid warfare and foreign influence operations against Europe. The way ahead is clear: As ambitions for European strategic autonomy become wishful thinking in light of the current crisis, allies should focus on retaining NATO's strategic autonomy as a whole. For the foreseeable future, both sides of the Atlantic have to live by one motto: NATO first! The authors are analysts at the Berlin-based German Council on Foreign Relations (DGAP). https://www.defensenews.com/opinion/commentary/2020/04/09/the-coronavirus-threatens-nato-lets-move-to-protect-the-alliance/

  • Podcast: How The A&D Supply Chain Is Coping With COVID-19

    April 14, 2020 | International, Aerospace, Naval, Land, C4ISR, Security

    Podcast: How The A&D Supply Chain Is Coping With COVID-19

    Michael Bruno Sean Broderick Airbus has slashed near-term airliner production, and Boeing's cuts could be worse. Air traffic has collapsed, and fewer aircraft will need to be repaired. Meanwhile, factories everywhere face the dilemma of how to stay in operation with worker absences as high as 50%. Listen in as Vivek Saxena, managing director of Advisory Aerospace, speaks with Aviation Week editors Sean Broderick and Michael Bruno about how the supply chain is coping with COVID-19. https://aviationweek.com/aerospace/podcast-how-ad-supply-chain-coping-covid-19

  • Newest DoD industry guidance clarifies repayments, makes prototyping easier

    April 14, 2020 | International, Aerospace, Naval, Land, C4ISR, Security

    Newest DoD industry guidance clarifies repayments, makes prototyping easier

    By: Aaron Mehta WASHINGTON — As part of its ongoing effort to bolster the defense industrial base, the Pentagon has issued two new pieces of guidance — one focused on workers, and one focused on prototype contracts. Overall, the department has now issued 17 different actions, ranging from basic guidance for industry to memos changing how the department pays contractors, since March 5. In an April 6 memo, acquisition head Ellen Lord changed the rules for issuing prototype contracts through other transaction authorities. OTAs are small contracts awarded to companies of any size, in theory targeted at nontraditional defense contractors, with the purpose of conducting research or prototype efforts on a specific project; they are not subject to Federal Acquisition Regulation rules. By comparison, SBIR contracts are targeted at small businesses in order to act as seed money for them to conduct research and development efforts; they are subject to the FAR rules. According to data gathered by Govini, the Pentagon issued $16.3 billion in OTA contracts between fiscal 2015 to fiscal 2019. Those numbers grew year over year during that time period, from $0.7 billion in FY15 to $7 billion in FY19. Lord's memo, which like other Pentagon industrial base guidance will last “for the period covered by the COVID-19 emergency declaration,” includes three pieces of guidance: Prototype project contracts in excess of $100 million can now be issued by the directors of the defense agencies/field activities, commanding officers of combatant command, and the director of the Defense Innovation Unit. Prototype project agreements and any follow-on production contracts in excess of $500 million can be issued by the senior procurement executives of the military departments, the director of DARPA and the director of the Missile Defense Agency. OT prototype actions between $100 and $500 million can be delegated to lower officials as seen fit by the leaders of those organizations. Perhaps most notably, the memo attempts to make it easier to get prototype contracts specifically related to COVID-19 up and running, by relaxing a requirement to give the congressional defense committees a 30-day advance notice before issuing a transaction in excess of $500 million for projects that are tied into the ongoing pandemic. Instead, the goal will be to make a notification “as soon as practicable after the commencement of such a transaction.” Meanwhile, the department has also given new guidance related to a part of the recent Coronavirus Aid, Relief, and Economic Security (CARES) Act stimulus package, which allows agencies to reimburse contractors for payments to their workforce, should they be prevented from working due to COVID-19 facility closures or other restrictions. Under the new guidance, contracting officers at the department may decide not to reimburse in situations where employees or subcontractor employees were able to work, including remote or telework options, but choose not to; when the costs seeking reimbursement were not associated with keeping employees in a ready state; when costs were incurred prior to January 31, 2020, or after September 30, 2020; or when the contractor has been or can be reimbursed by other means. Additionally, the reimbursement is not an option for costs not related to COVID-19 and, notably, is “subject to the availability of funds,” per a department statement. Advance payments are also not an option. https://www.defensenews.com/coronavirus/2020/04/09/newest-dod-industry-guidance-clarifies-repayments-makes-prototyping-easier/

  • Defense Contractors Keep Most Plants Running Despite Outbreak

    April 14, 2020 | International, Aerospace, Naval, Land, C4ISR, Security

    Defense Contractors Keep Most Plants Running Despite Outbreak

    By Anthony Capaccio As of Wednesday, 86 sites were closed out of 10,509 locations Boeing's aircraft plant closings are one big exception The Pentagon's contractors have largely avoided widespread closings or “major impacts” so far from the coronavirus pandemic, according to a running tally compiled by its contracts management office. Of 10,509 locations tracked or monitored by the Defense Contract Management Agency, 135 had closed at some point as of Wednesday. Forty-nine of those reopened after an average of about 10 days. “These closures have generally been short-term in order to clean facilities” or to “reduce the potential exposure of employees,” agency spokesman Matthew Montgomery said in a statement. The agency doesn't track how many workers are affected, he said. And the numbers on closings don't reflect defense contractors that have cut back their operations -- or the outsized impact of Boeing Co.'s shutdowns. Boeing, the No. 2 U.S. defense contractor, has indefinitely halted assembly of the KC-46 refueling tanker and the P-8A Poseidon maritime patrol aircraft at its facilities in Washington State, the initial U.S. center of the pandemic. Last Friday, the company began a two-week shutdown of the Philadelphia-area factory where it manufactures military rotorcraft, including the Chinook CH-47 cargo helicopter and the tilt-rotor V-22 Osprey. Huntington Is Open By contrast, Huntington Ingalls Industries Inc., has had no closings to this point, according to spokeswoman Beci Brenton. With 42,000 employees, it's the sole U.S. builder of aircraft carriers and the co-contractor of Navy attack submarines and DDG-51 destroyers. Montgomery said the Defense Department “has worked closely with local and state governments to ensure that the defense industrial base is considered critical infrastructure to help minimize the impact of statewide closures.” Impacts from closings “are being seen across all sectors including but not limited to clothing and textiles, aerospace, shipbuilding, and ground vehicles,” he said. Many Pentagon contractors “are struggling to maintain a mission-ready workforce due to work site closures, personnel quarantines and state and local restrictions on movement” that can't “be resolved through remote work,” Kim Herrington, the Defense Department's pricing and contracting director, said in a memo Wednesday. To support the defense industry, the DCMA has modified about 1,400 contracts to increase the rate for “progress payments” for work completed on time from 80% to 90% of costs incurred for large businesses and from 90% of cost to 95% for small businesses. The move resulted in $3 billion being advanced to industry, according to Herrington. That's in addition to $882 million that the Air Force is providing to Chicago-based Boeing. The funds were being withheld until the company corrected or provided sufficient plans to correct numerous deficiencies with KC-46 tankers. Most of those flaws remain unresolved. Also, the Pentagon issued guidance Thursday that lets military contracting officers reimburse companies for documented payments to employees who can't work because of coronavirus facility closings or related restrictions. https://www.bloomberg.com/news/articles/2020-04-10/defense-contractors-keep-most-plants-running-despite-outbreak

  • Appel à projets de solutions innovantes pour lutter contre le COVID-19

    April 14, 2020 | International, Aerospace, Naval, Land, C4ISR, Security

    Appel à projets de solutions innovantes pour lutter contre le COVID-19

    Mise à jour : 14/04/2020 - Direction : AID Cet appel à projets du ministère des Armées, lancé par l'Agence de l'Innovation de Défense (AID), dans le cadre du plan gouvernemental de lutte contre le COVID-19, vise à disposer de propositions pour lutter contre la pandémie de COVID-19. Il porte sur la recherche de solutions innovantes, qu'elles soient d'ordre technologique, organisationnel, managérial ou d'adaptation de processus industriels, qui pourraient être directement mobilisables afin de : protéger la population, soutenir la prise en charge des malades, tester la population, surveiller l'évolution de la maladie au niveau individuel et l'évolution de la pandémie, ou aider à limiter les contraintes pendant la période de crise. Important : les projets devront être d'une maturité technologique suffisante pour être employables pendant l'actuelle pandémie. Ces solutions innovantes devront être facilement et rapidement reproductibles et s'appliquer à l'échelle de l'ensemble du territoire national dans l'enveloppe budgétaire définie. Un budget de 10 000 000€ TTC est prévu pour cet appel à projets, qui vise à financer un à plusieurs projets d'intérêt. Pour permettre le soutien d'un maximum de projets prometteurs, sauf exceptions dûment justifiées, les projets retenus par cet appel à projets ne seront pas cumulables avec les financements flash mis en place par l'UE ou l'ANR : Appel à projets de l'Agence nationale pour la recherche (ANR) : https://anr.fr/fr/detail/call/appel-a-projets-flash-covid-19/ Appel à projets de la Commission européenne : https://ec.europa.eu/info/news/startups-and-smes-innovative-solutions-welcome-2020-mar-13_en Les propositions de réponse sont attendues et évaluées au fil de l'eau jusqu'au 12 avril 2020. Les propositions déposées tardivement, jusqu'au 12 avril inclus, pourront être étudiées mais leurs chances d'être retenues seront fortement réduites. Ce que nous recherchons Nous avons identifié un certain nombre de domaines et de situations concrètes pour lesquels nous pressentons des améliorations possibles : Protections individuelles ou collectives, soignants et populations (e.g. masques, « hygiaphones de fortune », concepts innovants de protection, de barrières, techniques de recyclage, Do It Yourself, etc.) ; Gestion de la distance de sécurité entre individus ; Automatisation de t'ches pour le prélèvement, le nettoyage du matériel ou des salles ; Facilitation du déploiement d'hôpitaux de campagne en soutien aux populations ; Gestion de crise, aiguillage, structuration/modularité des chaînes de prise en charge (e.g. gestion logistique, RH, etc.) ; Production de nouvelles solutions de décontamination pour tout type de surface, pour petits et grands matériels, pour les espaces de vie, etc. ; Capacité de production en masse de solutions de décontamination ; Soutien à la prise en charge médicale (production du matériel ou traitement manquant, concept de recyclage, de détournement ou autre idée permettant de pallier ces manques) ; Détection du virus dans l'environnement ; Diagnostic et autodiagnostic rapide et conduite à tenir associée - dépistage massif - dépistage participatif ; Gestion de l'impact psychologique individuel et sociétal (communication et sensibilisation sur la crise et l'épidémie, amélioration de la perception du risque d'épidémie, gestion de l'après crise, etc.) ; Facteurs de limitation des déplacements et lutte contre la transgression ; Amélioration du travail à distance (outils de continuité numérique, sécurisation, etc.) ; Amélioration de la vie en isolement à domicile (numériques mais aussi hors solutions numériques) ; Autres thèmes dûment argumentés. NOTE IMPORTANTE aux producteurs de masques de protection : Dans le contexte de la crise sanitaire du COVID-19, les autorités gouvernementales ont sollicité l'appui de la direction générale de l'armement (DGA) du ministère des armées afin d'aider à identifier et caractériser des solutions permettant d'accroître la disponibilité de masques de protection face au virus. Nous travaillons en étroite collaboration avec la direction générale des entreprises (DGE) du Ministère de l'économie et des finances. Devant le succès de cette initiative, deux adresses m.él dédiées ont été créées et nous demandons aux entreprises d'adresser toute correspondance à ces deux adresses pour en accélérer le traitement. Adresse mél DGA : dga.Masques-Contact.fct(a)intradef.gouv.fr Adresse mél DGE : masques.dge(a)finances.gouv.fr Une fois l'accord préalable de la DGE obtenu pour la mise en test d'un prototype, les échantillons sont à envoyer à : DGA Maîtrise NRBC 5 rue Lavoisier 91710 VERT-LE-PETIT Nous ne sommes pas seulement intéressés par des technologies nouvelles ; le caractère innovant des propositions pourra consister à réorienter des technologies ou des processus industriels existants (par exemple détourner une usine de production de parfum pour en faire du gel hydroalcoolique). Nous acceptons les propositions provenant de tous types d'opérateurs : académiques, petites, moyennes entreprises, entreprises de taille intermédiaire, grands groupes. Des groupements constitués de ces différents types d'opérateurs seront possibles. En fonction du vecteur de financement ou d'acquisition utilisé, des restrictions sur l'origine ou la taille des opérateurs économiques pourront être appliquées. Les propositions internes des personnels civils et militaires du ministère des Armées sont également les bienvenues. Ce dont nous ne voulons pas Votre proposition ne doit pas proposer une innovation en cours de maturation qui n'a aucune chance d'être employée pour lutter contre l'actuelle pandémie. Contenu de la proposition Compte tenu de l'urgence du projet, la présentation et les justificatifs devront être les plus concis et précis possibles. La proposition doit contenir les documents suivants : le descriptif technique de la solution proposée et le cas d'usage (utilisateur, situation d'emploi) auquel cette solution répond. le plan projet comprenant : Un planning des développements et de la mise en service identifiant les jalons et les livrables permettant de suivre l'avancement du projet ; Une décomposition du prix de la proposition, en distinguant le cas échéant la part financée par le ministère des Armées et d'autres sources de financement. Le déposant pourra utilement proposer des éléments optionnels dans sa proposition. Un document de justification explicitant l'apport du projet pour chacun des 3 critères d'évaluation infra (impact, crédibilité, calendrier). Le dossier total ne dépassera pas 30 pages. Sélection des projets d'intérêt Critères obligatoires Les propositions seront analysées au regard des critères obligatoires ci-dessous : La solution proposée s'inscrit dans le périmètre de l'appel à projets (cf. « Ce que nous recherchons » et « Ce dont nous ne voulons pas ») ; La proposition contient un plan projet ; La proposition justifie l'intérêt du projet pour chacun des trois critères d'évaluation présentés infra. Seules les propositions remplissant l'ensemble des critères obligatoires seront analysées au fil de l'eau lors de la sélection des projets. Critères d'évaluation Un comité d'évaluation impliquant différents experts du ministère des Armées évaluera les propositions au fur et à mesure de leur réception. Les évaluateurs, pourront, s'ils le jugent nécessaire, entrer en contact avec les déposants afin de leur demander des clarifications sur leur proposition. Les évaluateurs ne pourront utiliser les informations contenues dans les propositions qu'aux seules fins de l'évaluation. Cette évaluation sera fondée sur les 3 critères suivants : Impact : les bénéfices anticipés (pour la population, les cycles de décision, les personnels de santé...) ; Crédibilité : tout élément de preuve, scientifique ou technique, permettant de confirmer la faisabilité du projet ; Calendrier : délai de mise en œuvre de la solution. Le choix de financer une proposition est fondé sur les résultats d'évaluation, sur le coût de chaque proposition vis-à-vis du budget disponible et sur des considérations d'ordre stratégique pour la personne publique. Les déposants dont la proposition n'aura pas été retenue pourront demander un avis synthétique sur leur proposition. Modalités pratiques Budget et contractualisation L'AID prévoit un budget total de 10 000 000 € TTC, visant à financer entre un et plusieurs projets. Date limite de remise des propositions Les propositions de réponse sont attendues et évaluées au fil de l'eau jusqu'au 12 avril 2020. Les propositions déposées tardivement, jusqu'au 12 avril inclus, pourront être étudiées mais leurs chances d'être retenues seront fortement réduites. Les propositions émises par les opérateurs économiques (personnes morales ou personnes physiques) doivent être déposées à l'adresse suivante : https://www.demarches-simplifiees.fr/commencer/appel-a-projets-aid-covid-19 Les propositions émises par les personnels civils et militaires du ministère des Armées (personnes physiques) doivent être déposées à l'adresse suivante : https://www.demarches-simplifiees.fr/commencer/appel-a-projets-aid-covid-19-innovateurs-minarm Un accusé sera transmis dès réception de la proposition. Important : en remettant son dossier, le déposant accepte sans réserve les conditions de l'appel à projets. Questions Vous pouvez poser toute question relative à l'appel à projets via l'adresse suivante : agenceinnovation.dir.fct(a)intradef.gouv.fr Protection des données à caractère personnel Les données à caractère personnel portées en réponse aux formulaires de dépôt de projet font l'objet d'un traitement mis en œuvre par le directeur de l'Agence de l'Innovation de Défense. Nous traitons vos données dans le but unique de permettre l'évaluation des projets et leur concrétisation éventuelles suite à l'évaluation. Les données seront conservées pendant une période de 6 mois après la date de clôture de l'appel à projet. Pendant cette période, nous mettons en place tous moyens aptes à assurer la confidentialité et la sécurité de vos données à caractère personnel, de manière à empêcher leur endommagement, effacement ou accès par des tiers non autorisés. Conformément à la loi « Informatique et Libertés » du 6 janvier 1978 modifiée et au Règlement Général sur la protection des données (RGPD) en vigueur depuis le 25 mai 2018. Vous bénéficiez d'un droit d'accès et de rectification sur vos données que vous pouvez exercer en contactant l'Agence de l'Innovation de Défense à l'adresse suivante : agenceinnovation.dir.fct(a)intradef.gouv.fr Mise à disposition des moyens du GENCI Les chercheurs académiques et industriels travaillant sur le sujet peuvent avoir accès immédiatement aux moyens de calcul et de stockage de la TGIR GENCI. Créée en 2007 par le MESRI, le CNRS, le CEA, la CPU et Inria, GENCI met à disposition des chercheurs français des moyens de calcul (supercalculateurs) et de stockage, souverains, opérés en France au TGCC (CEA), IDRIS (CNRS) et CINES (Universités) afin d'accélérer les travaux de recherche en modélisation/simulation, traitement de données massives et usage de l'intelligence artificielle (GENCI est une des composantes du plan français AIForHumanity avec la machine Jean Zay qui dispose notamment de 1300 GPU et 35 Po de stockage haut débit).Ces moyens et les services de support des centres sont accessibles gratuitement par le biais d'une procédure accélérée, pour plus d'information sur les moyens mis à disposition par GENCI vous pouvez vous référer ici : http://www.genci.fr/fr/node/1036 ; ou contacter directement Stéphane Requena, Directeur Technique & Innovation : stephane.requena(a)genci.fr Droits : AID

  • Vimy Award Call for Nominations

    April 14, 2020 | Local, Aerospace, Naval, Land, C4ISR, Security

    Vimy Award Call for Nominations

    Do you know someone who deserves to be celebrated? VIMY AWARD CALL FOR NOMINATIONS DO YOU KNOW SOMEONE WHO DESERVES TO BE CELEBRATED? Nominations Now Open for the annual Vimy Award presented at the 30th edition of the Vimy Gala. Established in 1991, the Vimy Award recognizes a Canadian who has made a significant and outstanding contribution to the defence and security of our nation and the preservation of our democratic values. It is normally presented as a lifetime achievement award. Past Recipients Her Excellency Adrienne Clarkson The Right Honourable Joe Clark The Honourable Bill Graham MGen Romeo Dallaire 2020 Distinguished Selection Committee Members Chief Justice of the Supreme Court Richard Wagner Chief of Defence Staff LGen Jonathan Vance Deputy Minister Jody Thomas The award honours the bravery and sacrifice of the Canadian soldiers – comprising the four divisions of the Canadian Corps – who were victorious in the battle of Vimy Ridge in April 1917.  The selection committee includes the Chief Justice of the Supreme Court of Canada and the Chief of Defence Staff of the Canadian Armed Forces, as well as industry and academic partners of the CDA Institute and members of the Board of Directors. Do you know someone who; Has made a sustained national or international contribution to Canada's National Security, Defence and/or the Canadian Military during his/her professional career. Serves as an inspiration at a national level within the Security, Defence and Military Community, through their leadership, practices, and accomplishments. Has garnered national and/or international recognition for his/her contributions to Canadian National Security, Defence and/or the Canadian Armed Forces. Is a leader whose achievements will be a source of historic and patriotic pride for generations to come. Nominations Deadline: July 1,2020 VISIT VIMY AWARD PAGE FOR FULL DETAILS VIMY GALA The Vimy Award will be presented at the prestigious Vimy Gala held on November 6, 2020 at the Canadian War Museum, Ottawa, Ontario. The Vimy Gala is a black-tie cocktail and dinner held annually since 1991 in Ottawa to honour Canada's fallen heroes in the context of the Remembrance Day activities held across the country. The Gala brings together active and retired members of the Canadian Armed Forces alongside future officers currently enrolled at the Royal Military Colleges, as well as industry and government leaders and international guests of honour. It will be an evening to remember and to reflect upon the sacrifices many have made for our nation and for the sake of building a more just and prosperous world. It is also a celebration of Canada and men and women who serve. The Gala is also an opportunity for defence professionals to recognize outstanding individuals in our community, whose courage, vision, and achievements inspire us all. To that end, we present the Vimy Award to a Canadian who has made an outstanding, lifelong contribution to our national security and defence and to preserving our democratic values. Past recipients include Her Excellency Adrianne Clarkson, the Honourable BIll Graham, General Rick Hillier, and the Right Honourable Joe Clark,LGen Christine Whitecross and most recently, Richard B. Fadden, O.C. 2019 Richard B. Fadden, O.C Vimy Award Acceptance Speech: 2020 and Beyond: Where Does Canada Fit? ATTEND and/or SPONSOR THE VIMY GALA 15% early bird discounts available The 30th Anniversary Vimy Gala will take place on: November 6, 2020 At the Canadian War Museum, Ottawa, Ontario, Canada. Contact Jennifer Giguere to find out about booking your Vimy Gala table and/or sponsorship at our 15% early bird special (ends July 1st). Please note that individual seating registration will only open in the fall. Gold Sponsors and above will be invited to a "Chairman's Circle" VIP Cocktail with members of the selction committee and the 2020 award laureate. jennifer@cdainstitute.ca CDA INSTITUTE PARTNERS PREMIER PARTNER STRATEGIC PARTNERS OPERATIONAL PARTNER Conference of Defence Associations Institute | 75 Albert Street, Suite 900, Ottawa, Ontario K1P 5E7 Canada

  • DARPA SBIR/STTR Opportunities

    April 14, 2020 | International, Aerospace, Naval, Land, C4ISR, Security

    DARPA SBIR/STTR Opportunities

    On April 8, 2020, the DARPA Small Business Programs Office (SBPO) pre-released the following SBIR/STTR Opportunities (SBOs): "Seabed Simulation Synthesis", Announcement Number HR001120S0019-04, published at https://beta.sam.gov/search?keywords=HR001120S0019-04 "Wearable Laser Detection and Alert System", Announcement Number HR001120S0019-05, published at https://beta.sam.gov/search?keywords=HR001120S0019-05 "Open Source Wide Band Software Defined Acoustic Modem", Announcement Number HR001120S0019-06, published at https://beta.sam.gov/search?keywords=HR001120S0019-06 These SBOs will open for proposals on April 23, 2020 and close on May 26, 2020. If you have any questions on the open BAAs or DSIP, please contact the DSIP Help Desk Monday – Friday, 9:00 a.m. – 5:00 p.m. ET at 703-214-1333 or DoDSBIRSupport@reisystems.com. Thank you for your interest in the DoD SBIR/STTR Program. DoD SBIR/STTR Support Team

  • FUNDING for Innovators who can help fight COVID-19 / Financement pour les innovateurs pouvant contribuer à la lutte contre COVID-19

    April 14, 2020 | Local, Aerospace, Naval, Land, C4ISR, Security

    FUNDING for Innovators who can help fight COVID-19 / Financement pour les innovateurs pouvant contribuer à la lutte contre COVID-19

    Today we launched our Testing Stream (formerly the Build in Canada Innovation Program) Call for Proposals aimed at Canadian innovators who have a prototype that can help Canada combat COVID-19 or similar future outbreaks. This call for proposals is a special edition of our Testing Stream and will be open for a limited time to support the Government of Canada's collective efforts in combating COVID-19. We are calling on innovators across the country who have an innovative solution ready to be tested by the federal government and its provincial, territorial and municipal partners to submit a proposal. You could land a sale of up to $550K, and if your innovation is deemed to be a game changer in the fight against COVID-19, under exceptional circumstances we may provide additional funding to test your innovation. This funding opportunity is open for a LIMITED time only – Apply before April 21, 2020. We are also planning the launch of a Testing Stream open Call for Proposals for any type of innovative prototype in Spring-Summer 2020. You may also be interested in three COVID-19 R&D funding challenges we recently launched: Made in Canada filtration material for the manufacture of N95 respirators and surgical masks Point of Care and Home Diagnostic Kit for COVID-19 Low-cost sensor system for COVID-19 patient monitoring APPLY ONLINE Aujourd'hui, nous avons lancé notre appel à propositions pour le volet de mise à l'essai (anciennement le Programme d'innovation construire au Canada - PICC) destiné aux innovateurs canadiens qui disposent d'un prototype pouvant aider le Canada à lutter contre COVID-19 ou d'autres épidémies futures similaires. Cet appel à propositions est une édition spéciale de notre volet de mise à l'essai, et sera ouvert pour une durée limitée, afin de soutenir les efforts collectifs du gouvernement du Canada dans la lutte contre COVID-19. Nous invitons les innovateurs de tout le pays qui disposent d'une solution innovante prête à être testée par le gouvernement fédéral et ses partenaires provinciaux, territoriaux et municipaux à soumettre une proposition. Vous pourriez décrocher une vente allant jusqu'à 550 000 $, et si votre innovation est considérée comme un facteur de changement important dans la lutte contre COVID-19, nous pouvons dans des circonstances exceptionnelles, vous fournir un financement supplémentaire pour tester votre innovation. Cette opportunité de financement est ouverte pour une durée LIMITÉE seulement - Posez votre candidature avant le 21 avril 2020. Nous prévoyons également le lancement d'un appel à propositions ouvert pour tout type de prototype innovant, au printemps-été 2020. Vous pourriez également être intéressé par trois opportunités de financement sous forme de défis visant la R&D que nous avons récemment lancée : Matériau de filtration fait au Canada pour la fabrication de respirateurs N95 et de masques chirurgicaux Système de capteurs peu coûteux surveiller l'état des patients atteints de la COVID-19 Trousse de diagnostic au point de service et à domicile pour le COVID-19 APPLIQUEZ EN LIGNE

  • Pandemic equipment snarls will rewrite Canada's definition of national security needs, say experts

    April 9, 2020 | Local, Security

    Pandemic equipment snarls will rewrite Canada's definition of national security needs, say experts

    When every country needs the same stuff to keep people safe, cost arguments seem less convincing The mad scramble to secure protective medical equipment and ventilators in the midst of a global pandemic has given some of the people who work in the usually tedious world of government procurement an unwelcome excuse to say, "I told you so." For years, there have been quiet but persistent demands coming out of the defence and acquisition sectors for successive federal governments to develop a list of "strategic industries" that do not have to rely on foreign supply chains — as insurance against the kind of procurement panic in play right now. Those calls were largely ignored. Now, defence experts are saying the COVID-19 crisis is a costly wake-up call. Canada needs — and has needed for almost two decades — a 21st century national security industrial plan that focuses on critical equipment and materials that should be produced at home, not abroad. 'Totally negligent' "We've been totally negligent on that and it is something I have articulated over and over again," said Alan Williams, the former head of the procurement branch at the Department of National Defence. "It's absolutely critical and if this doesn't wake us to that reality, I don't know what would." Williams devoted a substantial portion of one of his books, Reinventing Canadian Defence Procurement: A View from the Inside, to the absence of a national security vision of Canadian industry. "It frankly pisses me off because there's no reason for us not to have done that," he said. "That should be the kind of thing ministers, the leaders of the country desperately want to do. And why we seem to have avoided that kind of strategic thinking ... It just boggles my mind. It's inexcusable." 'Key' industries geared toward trade, not tragedies There was a faint glimmer of hope in the initial debate over the National Shipbuilding Strategy a decade ago, when the former Conservative government made a conscious decision to build future warships, Canadian Coast Guard and fisheries vessels in Canada, instead of outsourcing the work to other countries. At least in the context of defence procurement, Canada does have what are known as "key industrial capabilities", including shipbuilding, the production of certain types of ammunition and the construction of a range of aerospace and maritime electronic systems. Much of the work of those "key" domestic industries is, however, geared toward making high-end components for global supply chains. Critics have often said the policy focuses on high-tech innovation and business priorities, rather than hard-headed national security interests. Other countries, Williams said, have carved out a space for national security interests in industrial policy by not allowing other countries to build certain pieces of equipment. The Japanese, for example, have retained the capability to assemble their own warplanes. A shift in thinking The COVID-19 crisis, which has uncovered a potentially deadly shortage of ventilators and protective equipment for medical professionals, will push the federal government into a radical re-evaluation of what we need to be able to build at home to protect the country. In some respects, that work has already started. Earlier this week, reflecting on the Trump administration's moves to restrict exports of protective equipment, Ontario Premier Doug Ford expressed dismay over how the fate of so many Canadians had been taken out of the hands of the federal and provincial governments. Doctors, nurses demand government fill 'unacceptable' gaps in protective gear on front lines Canada working to produce up to 30,000 ventilators domestically: Trudeau "I am just so, so disappointed right now," he said. "We have a great relationship with the U.S. and all of a sudden they pull these shenanigans. But as I said yesterday, we will never rely on any other country going forward." Over the past two weeks, the federal government has announced plans to pour more than $2 billion into sourcing and acquiring protective medical equipment — masks, gowns, face shields, hand sanitizer — at home. On Tuesday, Ottawa unveiled a plan to get three Canadian companies to build 30,000 ventilators. Health equipment may have been outside the normal definition of national security needs until just a few weeks ago — but the shifting geopolitical landscape offered another warning sign that was ignored, said procurement expert Dave Perry. Leaning on China "This is pointing out the flip side of our globalized world and globalized supply chains," said Perry, an analyst and vice president at the Canadian Global Affairs Institute. "The cold, hard truth is that we're going to be relying on China for critical supplies." When the coronavirus outbreak ramped up, federal officials should have been aware of the potential peril involved in relying on Chinese factories for so many critical items. But in the absence of homegrown capability, Canada is at the mercy of panicked nations in the midst of panicked buying. "The entire world is trying to put through orders from the same sets of factories we're trying to source from," Perry said. "It might be accurate to criticize the Chinese for their response, but in the current context the government has to be cognizant of the impact on our potential ability to source stuff we really, really need right now from China — when there's not a lot of other options available in the short term and when the rest of the world is making the same phone calls." One of the critical arguments against a homegrown national security industrial strategy has been the cost. It's an argument familiar from the shipbuilding context: taxpayers pay a premium when we task Canadian industry with delivering solutions, instead of turning to cheaper foreign manufacturers. Elinor Sloan, a defence policy expert at Carleton University, said she believes the crisis will focus the public's attention on securing the critical industries and supplies the country needs in a global crisis. "The trade-off, as we know, is that it can be more costly to build or produce at home," she said. "This crisis may engender a perspective among the public that the extra cost is worth it." https://www.cbc.ca/news/politics/pandemic-covid-coronavirus-procurement-masks-ventilators-1.5525373

Shared by members

  • Share a news article with the community

    It’s very easy, simply copy/paste the link in the textbox below.

Subscribe to our newsletter

to not miss any news from the industry

You can customize your subscriptions in the confirmation email.