News

By: Jaroslaw Adamowski WARSAW, Poland — Czech Defence Minister Lubomir Metnar has announced the country's military could acquire up to six new L-39NG jet trainers from local manufacturer Aero Vodochody to replace its outdated L-39 Albatros aircraft. "The Ministry of Defence and the military are interested in these aircraft, negotiations are, of course, already taking place and we will acquire these aircraft," Metnar said, as reported by local broadcaster Ceska Televize. In addition to the Czech Air Force, Aero Vodochody hopes to supply its new jet trainer to a number of foreign markets. Earlier this year, Giuseppe Giordo, the company's president, said the firm estimates that in the next 10 to 15 years there will be a need to replace up to 3,000 training aircraft worldwide. The manufacturer aims to supply more than 100 L-39NGs in the next 10 years. Four jet trainers have already been ordered by Senegal, and deliveries are expected to begin in early 2020, according to Aero Vodochody. The L-39NG is fitted with the FJ44-4M turbofan engine made by Williams International. Aero Vodochody says it is the Czech Republic's largest aerospace company, with some 1,900 employees. https://www.defensenews.com/air/2018/10/18/czech-defense-minister-pledges-purchase-of-new-jet-trainers-from-local-company

Le gouvernement fédéral est désormais en mesure de formaliser sa décision sur le choix du prochain avion de combat de l'aviation belge. Un appareil qui devrait voler à partir de 2023 et durant au moins quatre décennies sous les cocardes tricolores rouges, jaunes et noires, qu'il soit américain ou européen. Les principaux ministres de l'équipe Michel ont été «briefés» mercredi par des experts sur le «retour sociétal» (les retombées économiques et les autres formes de coopération offertes à la Belgique) proposé par les promoteurs des deux candidats officiellement en lice pour le remplacement des F-16 vieillissants: le F-35 Lightning II du groupe américain Lockheed Martin et l'Eurofighter – alias Typhoon – du consortium européen éponyme promu par le Royaume-Uni, dans le cadre d'un marché d'État à État. Le 4 octobre, le conseil ministériel restreint (»kern») avait déjà entendu le rapport des militaires qui ont conduit l'évaluation exhaustive des deux candidats, sous l'égide d'une cellule de l'état-major de la Défense, l' «Air Combat Capability Program» (ACCaP), dirigée par le colonel Harold Van Pee. Un troisième candidat potentiel est le Rafale de l'avionneur français Dassault Aviation, pour lequel peu de données chiffrées sont disponibles. Car Paris n'a pas répondu à l'appel d'offres officiel, préférant proposer à la Belgique un «partenariat approfondi et structurant» fondé sur le Rafale et une implication belge dans le développement d'un avion de combat de nouvelle génération, envisagé par la France et l'Allemagne à l'horizon 2040 dans le contexte d'une relance de la défense européenne. Avant le départ de Vandeput? Le gouvernement dispose de toutes les informations pour faire son choix, dans un climat de lobbying intense et alors que les États-Unis ont accepté de prolonger pour une courte période – apparemment jusqu'à la fin du mois – leur offre pour le F-35 qui expirait formellement le 14 octobre, date des élections communales et provinciales. Le ministre de la Défense, Steven Vandeput (N-VA), qui quittera cette fonction d'ici le 1er janvier pour devenir bourgmestre de Hasselt, a dit lundi espérer encore pouvoir boucler cet épineux dossier avant son départ. «Ce serait beau si je pouvais conclure les gros investissements. Nous avons mis beaucoup de choses sur les rails qui sont aujourd'hui mûres pour être tranchées», a-t-il déclaré. Le Premier ministre Charles Michel (MR) a lui aussi cité, dans sa déclaration de politique générale à la Chambre le 8 octobre, les chantiers à boucler par le gouvernement – dont les décisions à prendre pour plusieurs programmes militaires, comme le remplacement des F-16 – mais en se montrant plus prudent sur l'échéance. «Nous prendrons très vite, et en tout cas avant la fin de la législature (en mai prochain, NDLR), les décisions qui s'imposent pour chacun de ces programmes», a assuré M. Michel. Car, comme souvent en Belgique, le dossier ACCaP s'est retrouvé mêlé à au moins deux autres programmes militaires: l'achat de nouveaux drones, potentiellement armés, et de nouveaux blindés pour la composante Terre, un programme baptisé «CaMo» portant sur 477 engins et à mener en coopération avec la France. L'approche de la dernière ligne droite avant une décision sur le nouveau chasseur-bombardier a accentué les efforts de lobbying dans ce marché d'un montant initial de 3,6 milliards d'euros – et une quinzaine de milliards sur la durée de vie attendue de l'appareil, soit une quarantaine d'années – même si les offres américaine et britanniques semblent «en dessous» de ce cadre financier, selon des sources concordantes. Les Britanniques, qui promeuvent le Typhoon au nom du consortium Eurofighter (rassemblant également l'Allemagne, l'Espagne et l'Italie), craignent une décision (trop) h'tive en faveur du F-35 prise en dépit de nombreuses incertitudes sur le coût du chasseur furtif américain, tant à l'achat – la version proposée à la Belgique est le Block 4, dont le développement n'a pas encore été financé – qu'à l'utilisation. Plusieurs ministres britanniques, dont ceux des Affaires étrangères et du Commerce international, Jeremy Hunt et Liam Fox, viennent ainsi d'écrire à leurs homologues belges pour, selon une source informée, leur rappeler l'intérêt pour la Belgique d'une solution européenne, l'Eurofighter étant produit à 75% sur le continent. https://www.lavenir.net/cnt/dmf20181018_01244354/le-choix-du-remplacant-des-f-16-belges-va-tomber

New Disruptive Computing & Networks organization will operate as part of Boeing Engineering, Test & Technology Charles Toups to lead new organization Naveed Hussain to become new leader of Boeing Research & Technology CHICAGO, Oct. 17, 2018 /PRNewswire/ -- Boeing [NYSE: BA] today announced a new Disruptive Computing and Networks (DC&N) organization to develop computing and communications solutions for advanced commercial and government aerospace applications. By leveraging core technologies in quantum communications and computing, neuromorphic processing and advanced sensing, the new organization will enable Boeing to develop breakthrough solutions in secure communications, artificial intelligence and complex system optimization. In addition to building internal capabilities, DC&N will also work closely with Boeing HorizonX, the company's innovation cell, to identify external partners for collaboration to accelerate growth. "Advanced computing and communications technologies are increasingly at the core of all aerospace innovation," said Greg Hyslop, Boeing's chief technology officer and senior vice president of Engineering, Test & Technology. "We're excited to stand up the Disruptive Computing and Networks organization because it will help us develop new businesses and partnerships in this rapidly-expanding field, delivering more value to our customers and helping further define our second century of aerospace leadership" DC&N will be based in Southern California and operate as a part of Boeing Engineering, Test & Technology. Charles Toups, formerly the vice president and general manager of Boeing Research & Technology (BR&T), will lead the organization as vice president and general manager. Prior to leading BR&T, Toups served in a number of senior engineering management and business positions at Boeing, including vice president and general manager of the Network and Tactical Systems division at Boeing Defense, Space & Security, vice president of engineering for Boeing Defense, Space & Security, and vice president of Boeing Satellite Systems, where he led multiple commercial and government communication satellite businesses. Toups earned a bachelor's degree in engineering from the University of California at Irvine, master's degree in mechanical engineering from the Massachusetts Institute of Technology and master's degree in business management from the Stanford University Graduate School of Business. Naveed Hussain will serve as the new leader of BR&T, the company's advanced central research and development organization. BR&T is comprised of nearly 4,000 engineers, scientists, technicians and technologists who create and collaborate with research and development partners around the world to provide innovative systems and solutions to the aerospace industry's toughest challenges. Hussain will have oversight of five facilities in the U.S. and six international research centers. Hussain is currently vice president of Aeromechanics Technology and leads the BR&T facility in Southern California. He has held a number of key leadership roles at Boeing since joining the company as a Howard Hughes Doctoral Fellow nearly 30 years ago. His accomplishments include leading Platform & Networked Systems Technology for BR&T, launching the BR&T-India research center in Bangalore and directing BDS Flight Engineering. Hussain earned his undergraduate degree from Rensselaer Polytechnic Institute, as well as a master's degree and PhD in mechanical engineering from Stanford University. He also completed his MBA at the Wharton School at the University of Pennsylvania. Contact: Sandy Angers Boeing Communications Mobile: +1-206-851-7974 SOURCE Boeing http://boeing.mediaroom.com/2018-10-17-Boeing-Launches-New-Organization-to-Unleash-the-Power-of-Advanced-Computing-and-Networks-in-Aerospace

Expands development of machine learning and crowdsourcing capabilities to augment global GEOINT missions HERNDON, VA, Oct. 18, 2018 /CNW/ - Radiant Solutions, a Maxar Technologies company (NYSE: MAXR) (TSX: MAXR), today announced a $92 million contract award on a Small Business Innovation Research (SBIR) Phase III contract with the National Geospatial- Intelligence Agency (NGA) to rapidly develop, prototype, and deploy machine learning and crowdsourcing capabilities to augment a wide variety of NGA missions. NGA exercised the 2019 contract option year and expanded the value over a three year period of performance. The SBIR Phase III program incents commercial firms to apply innovative solutions to pressing national security problems. As outlined in NGA's recently updated commercial GEOINT strategy, the agency is employing a variety of contracting methods to leverage commercial automation capabilities to augment conventional analysis, giving analysts more time to focus on more challenging, mission-critical problems. Through SBIR Phase III awards, the U.S. government can fund logical extensions of SBIR Data and receive a royalty-free license to that technology while protecting commercial industry's ability to make these offerings available to the global marketplace. Radiant Solutions participates in the SBIR Phase III program through its ongoing investment in Signature Analyst™, a predictive modeling engine that applies machine learning to massive amounts of geospatial data to help analysts quickly search broad geographic areas. Since 2006, Radiant Solutions and its subsidiary companies have been awarded eight SBIR Phase III contracts across multiple agencies. Radiant Solutions will advance development of machine learning capabilities, such as its DeepCore Computer Vision SDK and crowdsourcing capabilities, such as Tomnod, to help analysts quickly process large volumes of remote sensing data, understand global patterns of life and enable broad area search. The award also expands support for the NSG Open Mapping Enclave (NOME), a volunteered geographic information operational prototype that enables trusted users on multiple domains to easily create or modify foundation GEOINT to create living maps and enable timely analysis. These capabilities will be available for broad use across the U.S. Government and its global mission partners. "We are excited to expand our SBIR Phase III partnership with NGA and apply commercial innovation in machine learning and crowdsourcing to difficult national security problems," said Tony Frazier, President of Radiant Solutions. "We are fully committed to helping the NGA harness the massive potential of Commercial GEOINT to reveal insights where and when it matters to build a better world." Radiant Solutions has made several recent announcements that reveal how the company is applying Machine Learning and Crowdsourcing to Global GEOINT Missions: Maxar Technologies' Radiant Solutions Awarded Janus Geography Prime Contract by the National Geospatial-Intelligence Agency Maxar Technologies' Radiant Solutions Partners with NGA to Accelerate Innovation in Machine Learning Technologies Applied to Satellite Imagery SpaceNet™ Team Earns the 2018 USGIF Industry Achievement Award The company will be showcasing a number of these capabilities at the NVIDIA GTC DC event Oct. 22-24. About Radiant Solutions Radiant Solutions provides highly specialized, innovative geospatial multisource data, analytics, software, and services to deliver critical insights and intelligence where and when it matters. Poised to transform how customers support global mapping and intelligence missions at scale, Radiant Solutions harnesses the proliferation of pervasive information-gathering sensors, open-source software, cloud computing, machine learning, and big data analytics. Our combined team of over 1,000 sensor and spacecraft engineers, geospatial analysts, developers, data scientists, and DevOps engineers delivers innovative geospatial solutions that keep our nation safe, protect critical infrastructure, and preserve scarce natural resources. Building on the legacy of MDA Information Systems, RadiantBlue, DigitalGlobe Intelligence Solutions, and HumanGeo, the newly combined Radiant Solutions has a strong track record with its advanced capabilities, open approach, and experience supporting missions that helps customers in the GEOINT community reach critical decisions faster and with greater accuracy. Radiant Solutions is based in Herndon, VA with major offices across Virginia, Maryland, Florida, Michigan, and Colorado. Radiant Solutions is a Maxar Technologies company (NYSE: MAXR; TSX: MAXR). For more information visit: www.RadiantSolutions.com. About Maxar As a global leader of advanced space technology solutions, Maxar Technologies (formerly MacDonald, Dettwiler and Associates) is at the nexus of the new space economy, developing and sustaining the infrastructure and delivering the information, services, systems that unlock the promise of space for commercial and government markets. As a trusted partner, Maxar Technologies provides vertically-integrated capabilities and expertise including satellites, Earth imagery, robotics, geospatial data and analytics to help customers anticipate and address their most complex mission-critical challenges with confidence. With more than 6,500 employees in over 30 global locations, the Maxar Technologies portfolio of commercial space brands includes MDA, SSL, DigitalGlobe and Radiant Solutions. Every day, billions of people rely on Maxar to communicate, share information and data, and deliver insights that Build a Better World. Maxar trades on the Toronto Stock Exchange and New York Stock Exchange as MAXR. For more information, visit www.maxar.com. Forward-Looking Statements Certain statements and other information included in this release constitute "forward-looking information" or "forward-looking statements" (collectively, "forward-looking statements") under applicable securities laws. Statements including words such as "may", "will", "could", "should", "would", "plan", "potential", "intend", "anticipate", "believe", "estimate" or "expect" and other words, terms and phrases of similar meaning are often intended to identify forward-looking statements, although not all forward-looking statements contain these identifying words. Forward-looking statements involve estimates, expectations, projections, goals, forecasts, assumptions, risks and uncertainties, as well as other statements referring to or including forward-looking information included in this release. Forward-looking statements are subject to various risks and uncertainties which could cause actual results to differ materially from the anticipated results or expectations expressed in this release. As a result, although management of the Company believes that the expectations and assumptions on which such forward-looking statements are based are reasonable, undue reliance should not be placed on the forward-looking statements because the Company can give no assurance that they will prove to be correct. The risks that could cause actual results to differ materially from current expectations include, but are not limited to, the risk factors and other disclosures about the Company and its business included in the Company's continuous disclosure materials filed from time to time with Canadian and U.S. securities regulatory authorities, which are available online under the Company's SEDAR profile at www.sedar.com, under the Company's EDGAR profile at www.sec.gov or on the Company's website at www.maxar.com. The forward-looking statements contained in this release are expressly qualified in their entirety by the foregoing cautionary statements. All such forward-looking statements are based upon data available as of the date of this release or other specified date and speak only as of such date. The Company disclaims any intention or obligation to update or revise any forward-looking statements in this release as a result of new information or future events, except as may be required under applicable securities legislation. Investor Relations Contact Jason Gursky Maxar Technologies 1-303-684-2207 jason.gursky@maxar.com Media Contact Andre Kearns Radiant Solutions 1-703-480-6290 andre.kearns@radiantsolutions.com SOURCE Maxar Technologies Ltd. https://www.newswire.ca/news-releases/maxars-radiant-solutions-awarded-92-million-small-business-innovation-research-phase-iii-contract-by-the-national-geospatial-intelligence-agency-697898421.html

NAVY Northrop Grumman Systems Corp., doing business as Northrop Grumman Mission Systems Sector, Bethpage, New York, is awarded a $697,029,788 indefinite-delivery/indefinite-quantity contract for system upgrades for the EA-18G system configuration sets, Airborne Electronic Attack and Electronic Warfare systems and final upgrades for the EA-6B system for the Navy and the government of Australia under the Foreign Military Sales program. Work will be performed in Pt. Mugu, California (50 percent); Baltimore, Maryland (29 percent); Bethpage, New York (20 percent); and Rolling Meadows, Illinois (1 percent), and is expected to be completed in October 2023. Fiscal 2019 operations and maintenance (Navy) funds in amount of $996,902 are being obligated at time of award, all of which will expire at the end of the current fiscal year. This contract was not competitively procured pursuant to Federal Acquisition Regulation 6.302-1. The Naval Air Warfare Center Weapons Division, Point Mugu, California, is the contracting activity (N68936-19-D-0007). LGS Innovations LLC, Westminster, Colorado, is awarded a $15,528,008 indefinite-delivery/indefinite-quantity, cost-plus-fixed-fee, firm-fixed-price contract for engineering services, materials, training, and testing to support integration and operation of information operations payloads into unmanned aerial vehicles used by the U.S. Special Operations Command and the Navy. This two-year contract includes a three-year option which, if exercised, would bring the cumulative value of this contract to an estimated $34,996,905. Work will be performed across three geographic zones in the areas of Westminster, Colorado (40 percent); Florham Park, New Jersey (40 percent); and Jessup, Maryland (20 percent). The work is expected to be completed Oct. 16, 2020. If the option is exercised, the period of performance would extend through Oct. 16, 2023. No funds will be obligated at the time of award. Funding will be obligated via task/delivery orders using anticipated types of funding to include: operations and maintenance (Navy); other procurement (Navy); and research, development, test and evaluation (Navy). Contract funds will not expire at the end of the current fiscal year. This sole-source procurement is issued using other than full and open competition in accordance with Federal Acquisition Regulation Subpart 6.302-1 and 10 U.S. Code 2304(c)(1) - only one responsible source. The Space and Naval Warfare Systems Center Pacific, San Diego, California, is the contracting activity (N66001-19-D-3401). Wiley Wilson Burns and McDonnell JV, Alexandria, Virginia, is awarded $15,000,000 firm-fixed-price modification under a previously awarded indefinite-quantity architect-engineering contract (N40080-15-D-0452) to exercise option four for engineering and design services for general and administrative facilities within the Naval Facilities Engineering Command. The total contract amount after exercise of this option will be is $75,000,000. No task orders are being issued at this time. Work will be performed at various administrative facilities within the Naval Facilities Engineering Command Washington area of responsibility, including but not limited to, Maryland (45 percent); Washington, District of Columbia (30 percent); and Virginia (20 percent). Work may also be performed in the remainder of the U.S. (5 percent), and is expected to be completed in October 2019. No funds will be obligated at time of award; funds will be obligated on individual task orders as they are issued. Task orders will be primarily funded by fiscal 2019 operations and maintenance (Navy and Marine Corps); and fiscal 2019 Navy working capital funds. The Naval Facilities Engineering Command, Washington, Washington, District of Columbia, is the contracting activity. Rockwell Collins Inc. Government Systems Division, Cedar Rapids, Iowa, is awarded a $7,062,238 five-year long-term contract for repair of 22 various navigation and communication items that are a part of the KC-130J, H-1, E-2C, P-3, common systems and other aircraft. Work will be performed at contractor facilities in Atlanta, Georgia; Cedar Rapids, Iowa; Calexico, California; and Wichita, Kansas. The percentage of work at each of those locations cannot be determined at this time, and work is expected to be completed by October 2023. Working capital (Navy) funds will be obligated as individual task orders are issued and funds will not expire at the end of the current fiscal year. One firm was solicited for this non-competitive requirement under authority 10 U.S. Code 2304 (c)(1) and Federal Acquisition Regulation 6.302-1. The requirement was posted to the Federal Business Opportunities website and the Navy Electronic Commerce Online website, with one offer received. Naval Supply Systems Command Weapon Systems Support, Philadelphia, Pennsylvania, is the contracting activity (N00383-19-D-PS01). General Electric Co., Lynn, Massachusetts, was awarded $7,041,528 for modification P00012 to a previously awarded firm-fixed-price contract (N00019-17-C-0047) for the procurement of 24 F414-GE-400 engine devices for Lot 42 F/A-18 aircraft. Work will be performed in Evendale, Ohio, and is expected to be completed in February 2019. Fiscal 2018 aircraft procurement (Navy) funds in the amount $7,041,528 will be obligated at time of award, none of which will expire at the end of the current fiscal year. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. (Awarded Oct. 15, 2018) AIR FORCE The Boeing Co., Layton, Utah, has been awarded a $55,567,613 undefinitized, firm-price incentive-fee contract, for Intercontinental Ballistic Missile Cryptography Upgrade Increment II production. This contract provides for the government's minimum requirement of the production of 75 message processor drawers; 8 digital components; and program management support. Work will be performed in Huntsville, Alabama; and Huntington Beach, California, and is expected to be completed by Feb. 11, 2019. This award is the result of a sole-source acquisition and one offer was received. Fiscal 2018 missile procurement funds in the amount of $17,864,050 are being obligated at the time of award. Intercontinental Ballistic Missile Contracting Division, Hill Air Force Base, Utah, is the contracting activity (FA8204-19-C-0001). ARMY TGS USA,* McLean, Virginia, was awarded a $39,543,009 firm-fixed-price Foreign Military Sales (Iraq) contract for Toyota Land Cruisers and spare parts. Bids were solicited via the internet with three received. Work locations and funding will be determined with each order, with an estimated completion date of Oct. 16, 2018. U.S. Army Contracting Command, Warren, Michigan, is the contracting activity (W56HZV-19-D-0010). DEFENSE LOGISTICS AGENCY UPDATE: US Eco Products Corp., Haverhill, Massachusetts (SPE8EC-19-D-0030), has been added as an awardee to the multiple-award contract for commercial snow removal equipment, issued against solicitation SPE8EC-17-R-0009, announced May 5, 2017. *Small Business https://dod.defense.gov/News/Contracts/Contract-View/Article/1664968/source/GovDelivery/

Agreement positions company for work on next generation composite manufacturing technology DULLES, Va. – Oct. 16, 2018 – Northrop Grumman Corporation (NYSE: NOC) announced today it has finalized a Cooperation and Research Agreement to work closely with Airbus on the Wing of Tomorrow program. The three-year agreement expands the current Northrop Grumman relationship with Airbus and explores complex composite wing stiffener forming automation with out-of-autoclave material systems through an investment in equipment, test articles and engineering support. This relationship positions Northrop Grumman for future potential high-rate production opportunities. “This agreement builds on Northrop Grumman's valuable working relationship with Airbus and its partners. Our work with Airbus is an important component of growth in the commercial aerospace structures business,” said Wendy Williams, vice president and general manager, aerospace structures, Northrop Grumman. “We are excited about the advanced composite manufacturing technology being developed to support the Wing of Tomorrow concept, and our team is eager to continue our long-term relationship with Airbus on their future endeavors.” Northrop Grumman is currently producing composite fuselage stringers and frames for the Airbus A350 XWB -900 and -1000 variants at its state-of-the-art Aircraft Commercial Center of Excellence facility in Clearfield, Utah. The company has successfully delivered more than 200,000 Airbus A350 parts since the inception of the program. Northrop Grumman's proprietary automated stiffener forming process has been instrumental in the development and manufacture of high-rate production composite stringers and frames that are extremely high quality, affordable and dimensionally precise. This technology will be evolved to the new material systems, geometries and processing needs of the future while maintaining the superior benefits of a highly automated production process. The Airbus Wing of Tomorrow program will address future aggressive aircraft production rates and the requirement for wings to be made faster and more affordably. The program will explore the best materials, manufacturing and assembly techniques, as well as new technologies in aerodynamics and wing architecture. New material experimentation represents a major part of the program, and lower-cost composite technologies currently being pursued could enable wing components to be produced with significantly reduced equipment and tooling costs, along with enabling a faster production cycle. Increased use of composite materials also opens up new possibilities in terms of wing configuration and construction. Northrop Grumman is a leading global security company providing innovative systems, products and solutions in autonomous systems, cyber, C4ISR, space, strike, and logistics and modernization to customers worldwide. Please visit news.northropgrumman.com and follow us on Twitter, @NGCNews, for more information. https://news.northropgrumman.com/news/releases/northrop-grumman-and-airbus-finalize-agreement-on-wing-of-tomorrow-program

By: Adam Stone In the face of a rising near-peer threat to electronic communications, the Air Force is pressing forward with efforts to develop a new, more resilient, harder-to-jam waveform that soldiers could use on the battlefield. The service expects to receive responses from industry soon on a recent request for information around protected satellite communications. The request sought industry guidance on how best to implement a new, more resilient protected tactical waveform (PTW), which enables anti-jamming capabilities within protected tactical SATCOM. “The Air Force is looking to protect our warfighter's satellite communications against adversarial electronic jamming,” the Air Force's Space and Missile Systems Center (SMC) said in a written statement to C4ISRNet. The threat comes from “adversarial electronic jammers that are intended to disrupt and interfere with U.S. satellite communications,” leaders at SMC said. Protected tactical SATCOM is envisioned to provide worldwide, anti-jam communications to tactical warfighters in benign and contested environments. The quest to solidify satellite communication links has taken on increasing urgency in recent years. As satellite communications has emerged as an integral component in the military's command and control infrastructure, potential adversaries have stepped up their ability to disrupt such links. “Tactical satellite communications are vital to worldwide military operations,” the agency noted. “Our adversaries know this and desire to disrupt U.S. satellite communications. The Air Force is fielding Protected Tactical SATCOM capabilities to ... ensure warfighters around the globe have access to secure and reliable communications.” Industry is expected to play a key role in the development and deployment of any new waveform. Officials at SMC said that early prototyping efforts will be conducted through the Space Enterprise Consortium (SpEC), which is managed by Advanced Technology International. SpEC acts as a vehicle to facilitate federally-funded space-related prototype projects with an eye toward increasing flexibility, decreasing cost and shortening the development lifecycle. The organization claims 16 prototype awards to date, with some $26 million in funding awarded. Understanding the protected tactical waveform Government documents describe PTW as the centerpiece of the broader protected tactical SATCOM effort, noting that it provides “cost-effective, protected communications over both military and commercial satellites in multiple frequency bands as well as broader protection, more resiliency, more throughput and more efficient utilization of satellite bandwidth.” A flight test last year at Hansom Air Force Base suggested the emerging tool may soon be ready to deliver on such promises. While SMC leads the PTW effort, Hanscom is working in collaboration with MIT Lincoln Laboratory and the MITRE Corp. to conduct ground and airborne terminal work. Researchers from MIT's Lincoln Laboratory flew a Boeing 707 test aircraft for two and a half hours in order to use the waveform in flight. With a commercial satellite, officials gathered data on the PTW's ability to operate under realistic flight conditions. “We know this capability is something that would help our warfighters tremendously, as it will not only provide anti-jam communications, but also a low probability of detection and intercept,” Bill Lyons, Advanced Development program manager and PTW lead at Hanscom, said in an Air Force news release. The test scenario called for the waveform to perform in an aircraft-mounted terminal. Evaluators were looking to see whether its systems and algorithms would function as expected in a highly mobile environment. “Everything worked and we got the objectives accomplished successfully,” Ken Hetling, Advanced Satcom Systems and Operations associate group leader at Lincoln Laboratory, said in an Air Force press release. “The waveform worked.” Asking for industry input should help the service to chart its next steps in the development of more protections. While the request does not specify when or how the Air Force intends to move forward, it is clearly a matter not of whetherthe military will go down this road, but rather when and how. https://www.c4isrnet.com/c2-comms/satellites/2018/10/05/air-force-looks-for-help-on-new-hard-to-jam-satellite-waveform/

Alexis Pfefferlé Une industrie de la défense en Suisse ? Existe-t-il une industrie de la défense en Suisse ? Cette question, pertinente, fut posée par certains parlementaires à l'heure de décider si le programme AIR 2030 devait être conditionné à des affaires compensatoires. La réponse à cette question en Suisse n'est pas aussi claire que ce qu'elle pourrait être en France ou en l'Allemagne, pays qui possèdent des industries lourdes dévolues entièrement au secteur sécurité & défense. En Suisse, dont on rappelle que le tissu économique se compose à 90% de PME, l'industrie de la défense se compose d'une myriade de PME/PMI qui produisent principalement des machines ou des composants qui rentrent dans la chaine de production de groupes étrangers actifs dans le domaine. Par exemple, nos machines à haute précision sont aussi utiles et demandées dans le domaine civile que militaire. Selon SWISSMEM, l'association faîtière des PME et des grandes entreprises de l'industrie suisse des machines, des équipements électriques et des métaux (industrie MEM), l'industrie MEM concerne près de 320'000 emplois en Suisse et un chiffre d'affaire à l'export trois fois supérieur à celui de l'industrie horlogère. La part de l'industrie de défense est nettement plus faible mais permet de maintenir en Suisse des postes de travail à très haute valeur ajoutée. A la lecture de ces chiffres, les affaires compensatoires prévues dans le programme AIR2030 sont indiscutablement une opportunité exceptionnelle pour l'économie suisse. Dassault – Safran – Thalès, l'excellence industrielle française Retour à Lausanne le mercredi 16 octobre, 0800, pour la seconde journée BtoB entre les industriels suisses et les avionneurs retenus dans le cadre du programme AIR2030. Au menu de ce jour, le Rafale du consortium Dassault – Safran – Thalès. Le Rafale est un biréacteur de 4ème génération voire 4ème génération +, selon les classifications, en vertu d'une certaine furtivité active et tactique. C'est le fleuron de l'armée de l'air française et probablement le chasseur européen le plus avancé en matière technologique. La présentation est dirigée par Monsieur Florent SEYROL, responsable du Business Développement et Coopération Internationale pour Dassault Aviation et par Monsieur Pascal DIDIERJEAN pour le groupe Safran. Le programme Rafale étant un programme achevé en matière d'étude et bien rodé en matière de production, la présentation de Dassault est principalement axée sur la compensation indirecte. Les maîtres mots de la présentation sont l'innovation et la recherche. Poids lourd de l'industrie française et mondiale, Dassault c'est 4.8mia de chiffre d'affaire dont 20% sont alloués à la recherche et au développement. Hormis les pharmas, peu de sociétés suisses ont accès à un tel niveau de financement. Le fil conducteur semble tout trouvé et le consortium formé par Dassault, Safran et Thalès, au travers de leurs divisions combinées, offre de nombreuses possibilités pour les sociétés suisses et des perspectives intéressantes en matière de croissance dans des secteurs allant de l'aéronautique à l'optique en passant par la motorisation et l'électronique. Monsieur Florent SEYROL le souligne, Dassault a une taille internationale, l'expérience de la croissance et des grands contrats, et c'est également cette expérience que le groupe transmet à ses partenaires pour que ceux-ci puissent exploiter pleinement leur potentiel économique. Monsieur Pascal DIDIERJEAN, pour le groupe Safran, abonde dans ce sens, illustrant son propos avec l'exemple de la technologie VTOL (Vertical Take-off and Landing aircraft), où la Suisse, je l'apprends, à une carte à jouer, surtout aux cotés d'un motoriste comme Safran. Premier avionneur à le souligner, Dassault est également très sensible à l'innovation dans le milieu académique et les succès suisses des EPF ne sont pas passés inaperçus. A l'heure des difficultés rencontrées par ces institutions dans le cadre des projets européens, des financements indirectes de ce type dans le cadre des affaires compensatoires seraient pertinents et bienvenus. Pour Dassault, la force de la Suisse c'est l'innovation et investir dans notre pays et nos entreprises c'est investir dans les technologies du futur, un win win français. On notera enfin que plusieurs sociétés suisses présentes se sont félicitées du contact franc et direct qu'ils ont pu avoir avec les représentants du consortium Rafale, plus faciles d'accès et moins rigides que certains concurrents. RAFALE, points forts et points faibles Points forts Dassault-Safran-Thalès ont les moyens de leurs ambitions en matière de R&D et l'innovation suisse pourrait en profiter pleinement Des coûts à l'export réduits compte tenu de la proximité géographique Un calcul politique intéressant avec un allié influent à Bruxelles Points faibles Faible implantation en Suisse à l'heure actuelle Certains cantons où il faudra être très persuasif lors de la votation https://blogs.letemps.ch/alexis-pfefferle/2018/10/17/air2030-a-la-rencontre-de-dassault-et-du-rafale/

DEFENSE INFORMATION SYSTEMS AGENCY ViON Corp., Herndon, Virginia, was awarded a competitive, single award, indefinite-delivery/indefinite-quantity, firm-fixed-price contract for SPARC processor capacity services with a total lifecycle contract amount of $329,586,627. The minimum guarantee for this effort, which is being met by the first delivery order under HC1084-19-D-0001, is $630,000, funded by fiscal 2019 research, development, test and evaluation funds. Performance will be at current Defense Information Systems Agency (DISA) data centers or future DISA centers in the continental U.S. (CONUS); DISA outside CONUS data centers; and other DISA or DISA-approved locations worldwide in which DISA may acquire an operational responsibility. Proposals were solicited via the Federal Business Opportunities website (FEDBIZOPPS), and two proposals were received. The period of performance is for a base period of five years beginning Oct. 17, 2018, and five one-year option periods through Oct. 16, 2028. The Defense Information Technology Contracting Organization, Scott AFB, Illinois, is the contracting activity (HC1084-19-D-0001). NAVY The Boeing Co., Seattle, Washington, is awarded $136,999,356 for modification P00002 to a previously awarded firm-fixed-price, time and material, indefinite-delivery/indefinite-quantity contract (N00019-18-D-0113). This modification provides CFM56-7B27A/3 and CFM56-7B27AE engine depot maintenance and repair, field assessment, maintenance repair and overhaul engine repair, and technical assistance for removal and replacement of engines for the P-8A Poseidon aircraft in support of the Navy and the government of Australia. Work will be performed in Atlanta, Georgia (94 percent); and Seattle, Washington (6 percent), and is expected to be completed in October 2019. No funds will be obligated at time of award. Funds will be obligated on individual task orders as they are issued. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. General Dynamics National Steel and Shipbuilding Co., San Diego, California, is awarded a $136,753,425 undefinitized contract action on a not-to-exceed basis for the procurement of long lead time material, pre-production and engineering support for the Expeditionary Sea Base 6. This action allows the procurement of ship sets of the purchase specifications supporting integrated propulsion, main diesel generator engines, propeller and shafting, integrated bridge electronics, centrifugal pumps, fuel and lube oil purifiers and steering gear components. Work will be performed in San Diego, California (21 percent); Beloit, Wisconsin (19 percent); Pittsburgh, Pennsylvania (17 percent); various cities in Alabama and Iowa (9 percent); Chula Vista, California (5 percent); Chesapeake, Virginia (5 percent); Iron Mountain, Michigan (4 percent); Busan, Korea (3 percent); and various other locations totaling 17 percent, and is expected to be completed by May 2019. Fiscal 2018 shipbuilding and conversion (Navy) funding in the amount of $65,876,713 will be obligated at time of award and will not expire at the end of the current fiscal year. This contract was not competitively procured in accordance with U.S. Code 2304(c) (1) – only one responsible source and no other supplies or services will satisfy agency requirements. The Naval Sea Systems Command, Washington District of Columbia, is the contracting activity. StandardAero Inc., San Antonio, Texas, is being awarded $121,890,824 for modification P00002 to a previously awarded firm-fixed-price, time and material, indefinite-delivery/indefinite-quantity contract (N00019-18-D-0110). This modification provides CFM56-7B27A/3 and CFM56-7B27AE engine depot maintenance and repair, field assessment, maintenance repair and overhaul engine repair, and technical assistance for removal and replacement of engines for the P-8A Poseidon aircraft in support of the Navy and the government of Australia. Work will be performed in Winnipeg, Manitoba, Canada (93 percent); and San Antonia, Texas (7 percent), and is expected to be completed in October 2019. No funds will be obligated at time of award. Funds will be obligated on individual task orders as they are issued. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. The Boeing Co., Seattle, Washington, is awarded $33,025,575 for modification P00003 to a previously awarded firm-fixed-price, time and material, indefinite-delivery/indefinite-quantity multiple award contract (N00019-18-D-0112). This modification provides P-8A Poseidon aircraft depot scheduled and unscheduled maintenance, depot in-service repair planner and estimator requirements, technical directive incorporation, airframe modifications, ground support and removal and replacement of engines in support of the Navy and the government of Australia. Work will be performed in Atlanta, Georgia (94 percent); and Seattle, Washington (6 percent), and is expected to be completed in October 2019. No funds will be obligated at time of award. Funds will be obligated on individual task orders as they are issued. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. AAR Aircraft Services Inc., Indianapolis, Indiana, is awarded $32,784,405 for modification P00003 to a previously awarded firm-fixed-price, time and material, indefinite-delivery/indefinite-quantity multiple award contract (N00019-18-D-0111). This modification provides P-8A Poseidon aircraft depot scheduled and unscheduled maintenance, depot in-service repair planner and estimator requirements, technical directive incorporation, airframe modifications, ground support and removal and replacement of engines in support of the Navy and the government of Australia. Work will be performed in Indianapolis, Indiana, and is expected to be completed in October 2019. No funds will be obligated at time of award. Funds will be obligated on individual task orders as they are issued. The Naval Air Systems Command, Patuxent River, Maryland, is the contracting activity. Vectrus Systems Corp., Colorado Springs, Colorado, is awarded $28,694,621 for firm-fixed-price task order N6945019F0500 under a previously awarded global contingency service multiple award contract (N62742-16-D-3552) for base operations support services at Naval Station, Guantanamo Bay. The work to be performed provides for base operations support services to include family housing, facility management, facility investment, custodial, pest control, integrated solid waste management, other (swimming pools), grounds maintenance and landscaping, utilities management, electrical, wastewater, water, and base support vehicles and equipment. The task order also contains two unexercised six-month option periods, which if exercised would increase the cumulative task order value to $59,727,709. Work will be performed in Guantanamo Bay, Cuba, and is expected to be completed by November 2019. No funds will be obligated at time of award. Fiscal 2019 operations and maintenance (Navy, Army and Defense Agencies); fiscal 2019 Navy working capital funds; and fiscal 2019 Defense Health Program contract funds in the amount of $21,483,790 for recurring work will be obligated on this award and will not expire at the end of the current fiscal year. Three proposals were received for this task order. The Naval Facilities Engineering Command, Southeast, Jacksonville, Florida, is the contracting activity. EDO LLC, Amityville, New York, is awarded $7,751,952 for modification P00009 to a previously awarded cost-plus-fixed-fee, firm-fixed-price, cost reimbursable contract (N00019-17-C-0029). This modification provides for the procurement of four carriage system simulators, nine BRU-55B/A engineering change proposal kits, 30 joint miniature munition interface / universal armament interface capable umbilical cables, and non-recurring engineering for the universal armament interface to include parts, testing, labor and travel in support of the Precision Strike Weapons program office. Work will be performed in Amityville, New York, and is expected to be completed in June 2021. Fiscal 2018 aircraft procurement (Navy) funds in the amount of $7,751,952 will be obligated at time of award, none of which will expire at the end of the current fiscal year. The Naval Air Warfare Center Aircraft Division, Lakehurst, New Jersey, is the contracting activity. DEFENSE LOGISTICS AGENCY Aseptico Inc.,* Woodinville, Washington, has been awarded a maximum $28,500,000 fixed-price with economic-price-adjustment, indefinite-delivery/indefinite-quantity contract for hospital equipment and accessories for the Defense Logistics Agency electronic catalog. This is a five-year contract with no option periods. This was a competitive acquisition with 53 responses received; 16 contracts have been awarded to date. Using customers are Department of Defense and other federal organizations. Location of performance is Washington, with an Oct. 15, 2023, performance completion date. Type of appropriation is fiscal 2018 through 2023 defense working capital funds. The contracting activity is the Defense Logistics Agency Troop Support, Philadelphia, Pennsylvania (SPE2DH-19-D-0004). *Small Business https://dod.defense.gov/News/Contracts/Contract-View/Article/1663723/source/GovDelivery/