Back to news

March 3, 2021 | Local, Aerospace

Canada’s CAE buys L3Harris military training unit, with eyes on US programs

On the same subject

  • Cutting-edge radar system for new frigates never used on warships, must be adapted

    December 2, 2020 | Local, Naval

    Cutting-edge radar system for new frigates never used on warships, must be adapted

    New radar system can also be upgraded to work with ballistic missile defence CBC News · Posted: Dec 01, 2020 4:00 AM ET | Last Updated: December 1 The Canadian navy's new frigates will get a cutting-edge radar system that has never before been installed on a warship — a recent decision that quietly ended a heated debate within the $60 billion warship program. The Lockheed Martin-built AN/SPY-7 radar will be installed on the new warships despite a furious back-room lobbying campaign by elements in the defence industry to convince DND to take a pass on the new system. It was a critical decision — one on which the federal government has been silent, apart from a few scattered social media posts, despite repeatedly promising to be more open and transparent about the multi-billion-dollar decisions it makes on shipbuilding. The choice of a radar system for the frigates has important implications for the military, as well as for the taxpayers who will foot the bill for Ottawa's $60 billion plan to build 15 new surface combat ships for the navy. The BMD option It also has significant political ramifications because Lockheed Martin's AN/SPY-7 radar is easy to upgrade to a ballistic missile defence system — a defence program successive Canadian governments have resisted joining. The contract to install the radar system on the new frigates was awarded in September by the warship's prime contractor, Irving Shipbuilding Inc., and acknowledged publicly by Lockheed Martin Canada earlier this month. Japan purchased a land-based version of the radar to serve as an early warning system for North Korean ballistic missile launches. That plan was rolled back earlier this year in response to fears that the missile batteries — located near the radar installations — would pose a hazard to densely-populated surrounding areas. At the moment, Canada and Spain are the only two countries planning to put the SPY-7 on their warships, although Japan has now also signalled it might equip some of its new warships with the technology. For more than three decades, Canadian governments of both political stripes have turned down U.S. overtures to join its ballistic missile defence (BMD) network. The issue became a diplomatic lightning rod the last time it was discussed over 15 years ago. The new frigates, including their radar systems, are being designed with BMD in mind in case a future government decides to get Canada involved. The potential for a new political brawl over BMD worries leading defence expert Dave Perry less than the technical and budget issues related to the federal government's choice of radar system. New system unproven, says expert In a statement, the Department of National Defence insisted that the cost of adapting the radar to the Canadian frigate design "will be covered as part of the ($140 million) long-lead contract" signed with Irving Shipbuilding in early 2019, after Lockheed Martin was selected to design the new ships. There is another concern, though. The fact that the AN/SPY-7 "has not been marinized and deployed on a ship at sea is significant," said Perry, a defence procurement expert and vice president of the Canadian Global Affairs Institute. "It means on the spectrum of developmental production, it is far closer to the purely developmental end of the spectrum than something that is deployed and has been proven on a couple of different navies around the world," he said. Lockheed Martin officials dispute that assessment, saying all of the components have been used on warships in one way or another, including the cabinets used to house the electronics. "The SPY-7 radar is not in development. It was designed for use as a maritime radar and is based on mature technology that has been thoroughly tested and is being adapted and scaled for a variety of customers in both land-based and at-sea applications," said Gary Fudge, vice president and general manager of Lockheed Martin Canada Rotary and Mission Systems. The company officials concede it will take design work to integrate the system into the new Canadian frigates, but insist that would be true of any other new radar system. There are still risks, Perry said. Canada's struggles with new technology "Canada has a lot of problems bringing development technology into service," he said, pointing to auditor general reports on the procurement fiasco involving the CH-148 Cyclone maritime helicopter and the 16-year quest to replace the air force's fixed-wing search plane. "Part of the problem is making sure you understand what it is you actually are buying," Perry added. "So if you are structuring a process to buy something off-the-shelf, you can buy something off-the-shelf. But we generally don't do that." DND said the AN/SPY-7 was pitched as part of Lockheed Martin's bid to design and manage the frigate program, and the navy needs the most up-to-date technology in warships that will be in service for decades. The system represents the "latest generation radar, with capability that surpasses other units fielded today," said DND spokesperson Jessica Lamirande in a media statement. Canada's new frigates could take part in ballistic missile defence — if Ottawa says yes Industry briefing questions Ottawa's choice of guns, defence systems for new frigates PBO pushes up cost estimate for Canada's frigate build by $8 billion DND was targeted by a furious behind-the-scenes lobbying campaign aimed at getting it to drop Lockheed Martin's radar system. An unsolicited defence industry slide deck presentation — obtained and published last year by CBC News — made the rounds within the government and landed on the desks of senior officials and military commanders. It described the AN/SPY-7 as "unproven technology" that will be "costly to support." Lockheed Martin officials pushed back against that assertion recently, saying that the new system will be easier to maintain, relies on existing components and — importantly — doesn't have to be switched off for maintenance work. Lockheed Martin officials were less clear on whether the overall system has yet to be fully certified for use on warships at sea. "SPY-7 technology has been declared Technical Readiness Level 7 by the U.S. government, meaning it has been tested in an operationally relevant environment," said Fudge. "SPY-7 for CSC takes advantage of investments across multiple shore and sea based programs as well as internal funding for its development and testing. Canada has agreed to pay for the CSC-specific requirements and integration of SPY-7 into the CSC platform, which is required for any radar selected." https://www.cbc.ca/news/politics/frigate-radar-lockheed-martin-1.5822606

  • ITEC 2018: RCAF looks to the future

    May 14, 2018 | Local, Aerospace

    ITEC 2018: RCAF looks to the future

    Trevor Nash Following an industry ‘engagement session' in Ottawa on 2 May, the Royal Canadian Air Force (RCAF) has provided additional information to industry about its Future Aircrew Training (FAcT) requirement. Like many air forces around the world, the RCAF is looking at methods to both streamline and reduce the costs of producing aircrew, pilots, Air Combat Systems Officers (ACSO) and Airborne Electronic Sensor Operators (AES Op). The RCAF's preference is to opt for a training service provision model that is generated by one or more commercial contractors. At present, pilot training is conducted through two services contracts known as NATO Flying Training in Canada (NFTC) and Contracted Flying Training and Support (CFTS). These two contracts include classroom instruction, simulator training and flight training. These have been independently provided by CAE and KF Aerospace respectively however, these companies have recently combined their efforts to form a new 50:50 joint venture company named SkyAlyne that will now service both requirements. Although NFTC and CFTS training has been provided by industry, ACSO/AES Op training is delivered by 402 Squadron in Winnipeg using only DND personnel and equipment. Flying training is undertaken on the CT-142 (Dash-8) aircraft. These aircraft are approaching their end of life date and the ground training system that supports them is also old and needs replacing. According to the RCAF document issued prior to the industry engagement session: ‘The confluence of concluding pilot training service contracts, the need for revitalisation of the ACSO and AES Op training system, and the significant overlap of core knowledge and skills between these three occupations provide the opportunity to streamline key elements of aircrew training. ‘This approach will realise efficiencies in not only training time and cost, but also in training methodologies and incorporation of modern and evolving technologies. Additionally, the synthetic training environment will be leveraged to the greatest extent possible to maintain an aircrew training system that will remain relevant into the middle of the century. ‘It is essential that continuity of aircrew training be maintained throughout the transition.' Like most military procurements, FAcT has been a long time in the making with the first RFI issued in September 2013. If all goes well, contract award is scheduled for 2021 with a ramp-up during which ‘partial FAcT operations begin' during 2021-23. Full operating capability is not expected until 2027. Numerous companies have expressed interest including Boeing and Lockheed Martin as well of course, as SkyAlyne. The incumbent Canadian providers would appear to be in a strong position after pooling their resources. https://www.shephardmedia.com/news/training-simulation/itec-2018-rcaf-looks-future/

  • Davie en voie de devenir un partenaire stratégique dans le cadre de la Stratégie nationale de construction navale

    December 20, 2019 | Local, Naval

    Davie en voie de devenir un partenaire stratégique dans le cadre de la Stratégie nationale de construction navale

    LÉVIS, QC, le 19 déc. 2019 /CNW Telbec/ - Le plus grand chantier naval du Canada ayant la plus grande capacité de production est fier d'entrer en partenariat avec le Gouvernement du Canada pour la construction de la nouvelle flotte de navires de grande taille dans le cadre de la Stratégie nationale de construction navale. Alex Vicefield, président du conseil d'administration de Chantier Davie Canada inc., a déclaré : « L'annonce historique d'aujourd'hui marque le début d'un programme multigénérationnel qui s'échelonnera sur les trente prochaines années et qui solidifiera la position de Chantier Davie en tant que leader mondial en matière de livraison de navires spécialisés essentiels pour les missions. » M. Vicefield a ajouté : « Alors que la région arctique prend une importance globale croissante, la création d'un centre d'excellence pour la construction de brise-glaces, qui constituent un produit hautement exportable, se traduira par des avantages économiques considérables pour le Canada au cours des années à venir. Nous remercions le premier ministre et son gouvernement d'avoir respecté leur engagement en lien avec le renouvellement de la stratégie de construction navale et d'avoir confirmé le rôle de Davie en tant que partenaire stratégique clé. » James Davies, Président et Chef de la direction de Chantier Davie a souligné : « Au cours des dix dernières années, nous avons créé un constructeur naval avant-gardiste ayant livré des navires parmi les plus complexes jamais construits en Amérique du Nord. Alors que nous entamons une nouvelle décennie en tant que partenaire dans le cadre de la Stratégie nationale de construction navale, nous b'tirons sur nos compétences et sur notre expérience et nous tirerons profit de notre capacité de production unique ainsi que de nos installations afin de renouveler la flotte fédérale de façon rentable et en respectant les délais. » M. Davies a poursuivi en disant : « Il s'agira du plus grand programme de construction navale réalisé au Québec depuis la seconde Guerre mondiale, ce qui assurera la stabilité des emplois chez Davie et qui favorisera le développement de la grappe maritime québécoise. Celle-ci sera un moteur important de l'économie de la province. Nous avons maintenant h'te de rappeler au travail le plus rapidement possible les 1 000 travailleurs qui ont été mis à pied en 2017. » NOTE AUX ÉDITEURS : À propos de Davie Davie est le plus grand constructeur naval ayant la plus grande capacité de production au Canada. Certifié ISO 9001:2015 et ISO 14001:2015, Davie met à profit ses installations de fabrication de grande capacité ainsi que ses compétences en gestion de projet et en ingénierie afin de fournir des solutions clé en main à ses clients commerciaux et gouvernementaux, et ce, en appliquant les meilleures pratiques tout au long de la vie utile des navires. SOURCE Chantier Davie Canada Inc. Renseignements: Frédérik Boisvert, Vice-président, Affaires publiques, Chantier Davie, Tel : +1-418-455-2759, frederik.boisvert@davie.ca https://www.newswire.ca/fr/news-releases/davie-en-voie-de-devenir-un-partenaire-strategique-dans-le-cadre-de-la-strategie-nationale-de-construction-navale

All news