Back to news

November 5, 2018 | International, C4ISR

After Hurricane Michael, the Air Force moved Tyndall AFB’s contracting data to the cloud


WASHINGTON — After Hurricane Michael ravaged Tyndall Air Force Base in October, airmen took on an unusual mission: recovering the servers base officials used to write, release and award contracts.

Reclaiming those servers — which contain data and contract vehicles used by Tyndall's two contracting squadrons to order everything for the base from supplies for the base to spare parts for aircraft — was a relatively minor victory when compared to the larger devastation faced by the installation.

But the mission was an important one in that it allowed remaining base personnel to manage contracts in the wake of the disaster, Air Force officials told Defense News.

“Obviously, the base is devastated ... but it's clear that there were open, existing contracts whether that was for simple things like cutting the lawn or delivering food to the chow hall on base,” said Richard Aldridge, the Air Force's program executive officer for business and enterprise systems. “Someone has got to either terminate them, or put them on pause or make sure vendors are getting paid for work that they had already done before the contract.”

In the days after the hurricane, airmen from Gunter Annex in Alabama worked with the state's civil air patrol to fly into the Florida panhandle, obtain Tyndall's servers and transport them back to Maxwell Air Force Base, where Gunter is located.

Then, the service transferred data from the legacy contract writing system into a new cloud-based system called CON-IT, short for Contracting Information Technology.

The servers from Tyndall weren't necessary for base officials to use CON-IT, said Mike Allen, the Air Force's CON-IT program manager. But without them, contract officers would be left with no digital record of past contracts, and would be forced to draw up new contracts for mundane goods and services that would normally be bought through indefinite delivery/indefinite quantity contracts that allow for multiple orders.

"We were then able to migrate [the data from the servers] into CON-IT so that existing [indefinite delivery-indefinite quantity contracts] or ordering vehicles were available to them, and all of their existing contracts would be available to work with,” said Allen. “They weren't starting from a blank piece of paper.”

And moving to a cloud-based environment means that Tyndall's contracting data will no longer be vulnerable to future disasters, Aldridge added.

“It's ubiquitous; it doesn't matter where you are, you can access it,” he said.

Allen and Aldridge said the program office was able to transition Tyndall's data and train users on the new system, but were unable to provide details on how Tyndall's contracting officers had since used the new system.

The plan is to move all of the Air Force's current contract data from existing legacy systems to CON-IT by the end of 2019. The system, built by and originally developed by Appian for use by the Defense Information Systems Agency, has deployed to 1,100 users in 30 locations so far, Allen said.

CON-IT will replace three legacy systems: the standard procurement system that supports operational users; ConWrite, which supports the weapon system acquisition and research and development; and the automated contract preparation system for logistics contracts.

On the same subject

  • Defence Minister Bill Blair announces Canadian donation of over 800 drones to Ukraine

    February 19, 2024 | International, C4ISR

    Defence Minister Bill Blair announces Canadian donation of over 800 drones to Ukraine

    Today, the Honourable Bill Blair, Minister of National Defence, announced that Canada will donate more than 800 SkyRanger R70 multi-mission Unmanned Aerial Systems to Ukraine.

  • Royal Air Force Typhoon jets to receive key sensor upgrade

    August 9, 2019 | International, Aerospace

    Royal Air Force Typhoon jets to receive key sensor upgrade

    By: Andrew Chuter WARTON — With a complex weapons integration program squared away, giving Royal Air Force Typhoon jets more punch, key sensors on the jet could see an upgrade. The RAF's test and evaluation squadron is already test flying the Litening 5 targeting pod in order to optimize its operation by Typhoon pilots. Work is also underway to update and improve the reliability of the jets Pirate passive infrared airborne track equipment, said Andy Flynn, BAE System's Typhoon capability director. Known as Project Centurion, the British late last year completed integration of MBDA's Meteor, Brimstone and Storm Shadow missiles on Typhoon in 47 months. At a cost of around £425 million, or $515.83 million, the program allowed the RAF to stand down the entire fleet of Tornado jets that had provided the primary strike capability. Flynn told reporters during a briefing at the company's Warton combat air site in northwest England Aug. 7 that the sensor work was “the next iteration of Centurion.” “Agile spiral development and keeping the aircraft relevant is the phase we are in. We have done the big leap and it's now about keeping it relevant,” he said. The Tornado was a two-seat aircraft, whereas the Typhoon is single seat. Flynn said the work on the Litening 5 was about easing pilot workload. “What we are doing now is getting the feedback from customer and operations teams on how to make that tasking simpler and really increase the cycle time on ops. We've already got Litening 5 pods up in the air as an iteration and we are seeking feedback from 41 Squadron [the test and evaluation squadron], ” he said. The plan is to get the enhanced capability “out to the front line by the end of next year,” said Flynn. Development phase work is also underway on a new iteration of Pirate as well improving the reliability and robustness of the sensor. “That work is in the development phase and we are doing that over the Autumn period. What we are doing on Typhoon overall is really enhancing the sensors capability as well making the workload easier for the pilot,” said Flynn. The sensor changes are a small part of a wider capability update on the Typhoon to keep aircraft relevant until they go out of service, currently set for 2040. On the horizon for the RAF is a new e-scan radar, known as Radar 2, which is being developed for the British by Leonardo; the new BAE Striker II helmet; and networked enabled weapons. But, Eurofighter, the Airbus, BAE, and Leonardo industrial partnership responsible for the development and production of the Typhoon, is also conducting a review of future potential updates to the fighter. Eurofighter announced at the Paris Air Show in June a deal valued at 53.7 million euros with the NATO Eurofighter & Tornado Management Agency, or NETMA, to undertake a long-term evolution review of the fighter and the EJ200 engine over the next 19 months. NETMA represents the British, German, Italian and Spanish governments. Flynn said there were more than 50 separate candidate technologies being considered by the evolution review. Some of those potential upgrades could also find themselves cross decking to the Tempest sixth-generation fighter now being proposed by the British. Clive Marrison, the industrial requirements director for Team Tempest, the industrial/government partnership leading the next-generation fighter work , said both jets could benefit from close development ties. “Typhoon could benefit from some of the technologies that Tempest is looking at and by the same token Tempest could benefit from some of the technologies that Typhoon is investing in,” said Marrison. For example: Some of the cockpit and helmet work BAE is doing might allow industry to offer some of those technologies back into Typhoon, said Marrison. While the BAE executives were looking into the future for British combat air capabilities, the Typhoon approaches a landmark of sorts to be celebrated. Sixteen years after taking delivery of its first Typhoon, the RAF is preparing to receive the final aircraft ordered for its fleet in the next few weeks, said Flynn. The final aircraft in a British order for 160 Typhoons made its test flight recently and is due to be handed over to the RAF in the coming weeks. Completion of the order leaves 24 aircraft destined for Qatar on the order book for BAE, although it is also building parts of the Typhoons sold to Kuwait by Eurofighter partner Leonardo. Three equipment sets have so far been completed at BAE's Samlesbury plant near Warton, destined for the Leonardo assembly site in Italy. Flynn said the Qatar build program was just getting underway. The 24 aircraft order will see deliveries start in 2022 with completion set for 2024.

  • Navy Turns To AI To Save Billions In Fight Against Rust

    August 28, 2020 | International, Naval

    Navy Turns To AI To Save Billions In Fight Against Rust

    By KELSEY ATHERTON ALBUQUERQUE: The Navy is using Google Cloud to speed up a basic but time consuming task: finding and identifying rust. This approach has already been applied to inspect wind turbines and find potholes in roads, and promises advantages both in speed of inspection and in future predictive maintenance. “The AI technology behind this enabled the US Navy to quickly and seamlessly examine tens of thousands of images to prioritize the needs to be repaired immediately and or later on,” Mike Daniels, vice president of Global Public Sector, Google Cloud, told me in an interview. While Google was unwilling to disclose the exact value of the contract, the promise is that speedy, AI-enabled inspections will lower labor and material costs of inspection and repair enough to more than justify the expenditure on inspection AI. “The tools we're providing can not only save the Navy billions each year, but significantly improve readiness and speed deployment,” said Daniels. “And this is a physical job right now. We're improving results for the inspectors.” If AI-facilitated rust inspection can reduce the amount of time a ship needs to stay in harbor for repairs, it can narrow the window in which catastrophic disasters, like the fire which tore apart the Bonhomme Richard, can happen. This work is being done through Simple Technology Solutions (STS), who was awarded the work as a Phase 1 Small Business Innovation Research project. To train the AI, STS flew a drone on inspections to get images of rust. Next, STS combined these drone-filmed images with public domain images of ships, and uploaded both sets to a Google Cloud server. Specifically, the inspections will look for broad area rust and corrosion, as well as subtler damage that human eyes might skip over, like pitting or focused damage. Using native machine learning built into the Google Cloud, STS could then train the algorithm to process, understand and identify rust in the images. This is an iterative process, one where every uploaded inspection improves the accuracy of the next inspection. “There's no classified data that's going to be handled as part of this project,” said Daniels, noting that Google offers a high level of protection for images stored in its cloud by default. As we have seen in the past, aggregated unclassified data can sometimes be enough to reveal classified information, but the immediate utility of cloud-powered inspections should offset any distant concern of weakness revealed through corrosion maintenance. Most importantly, the inspection tool promises savings in time. A widely-cited 2014 report from the US Navy attributed the cost of fighting rust and corrosion at $3 billion. Some of that cost is hard to shake: the paint used to cover rust-scrapped areas can cost as much as $250 a gallon. Catching corrosion quickly and early shortens the amount of time humans need to work to fix a vessel, and should reduce the area that needs repair for each inspection.

All news